Bond Between Near-Surface Mounted Carbon-Fiber-Reinforced Polymer Laminate Strips and Concrete

In recent years, a strengthening technique based on near-surface mounted (NSM) laminate strips of carbon-fiber-reinforced polymer (CFRP) has been used to increase the load-carrying capacity of concrete and masonry structures by introducing laminate strips into precut grooves on the concrete cover of the elements to be strengthened. The high experimentally derived levels of strength efficacy with concrete columns, beams, and masonry panels have presented NSM as a viable and promising technique. This practice requires no surface preparation work and, after cutting the groove, requires minimal installation time compared to the externally bonded reinforcing technique. A further advantage associated with NSM CFRP is its ability to significantly reduce the probability of harm resulting from fire, acts of vandalism, mechanical damage, and aging effects. To assess the bond behavior of CFRP to concrete, pullout-bending tests have been carried out. The influences of bond length and concrete strength on bond behavior are analyzed, the tests are described, and the results are presented and discussed in detail. Finally, a local stress-slip relationship is determined based on both experimental results and a numerical strategy.     

A new approach to designing reduced scale thermal-hydraulic experiments

Reduced scale experiments are often employed in engineering because they are much cheaper than real scale testing. Unfortunately, though, it is difficult to design a thermal-hydraulic circuit or equipment in reduced scale capable of reproducing, both accurately and simultaneously, all the physical phenomena that occur in real scale and operating conditions. This paper presents a methodology to designing thermal-hydraulic experiments in reduced scale based on setting up a constrained optimization problem that is solved using genetic algorithms (GAs). In order to demonstrate the application of the methodology proposed, we performed some investigations in the design of a heater aimed to simulate the transport of heat and momentum in the core of a pressurized water reactor (PWR) at 100% of nominal power and non-accident operating conditions. The results obtained show that the proposed methodology is a promising approach for designing reduced scale experiments.     

Agents in object‐oriented software engineering

Software engineers of multi‐agent systems (MASs) are faced with different concerns such as autonomy, adaptation, interaction, collaboration, learning, and mobility, which are essentially different from classical concerns addressed in object‐oriented software engineering. MAS developers, however, have relied mostly on object‐oriented design techniques and programming languages, such as Java. This often leads to a poor separation of MAS concerns and in turn to the production of MASs that are difficult to maintain and reuse. This paper discusses software engineering approaches for MASs, and presents a new method for integrating agents into object‐oriented software engineering from an early stage of design. The proposed approach encourages the separate handling of MAS concerns, and provides a disciplined scheme for their composition. Our proposal explores the benefits of aspect‐oriented software development for the incorporation of agents into object‐oriented systems. We also illustrate our aspect‐oriented approach through the Portalware multi‐agent system, a Web‐based environment for the development of e‐commerce portals. Copyright © 2004 John Wiley & Sons, Ltd.     

3D television: Developing a multi‐modal multi‐viewer TV system of the future

Abstract— Under the European Union funded Advanced Three‐dimensional Television System Technologies (ATTEST) project, De Montfort University (DMU) is developing a 3D display system targeted specifically at domestic television applications. This system uses a modified transmissive LCD panel together with novel backlighting and optics to project multiple viewing regions, or exit pupils, into the viewing space. These exit pupils are located in space using a head tracker. The display accommodates multiple viewers simultaneously and imposes no physical constraints, such as special eyewear. Viewers may move freely over a “typical” room‐sized area. The design of the backlighting facilitates many other display regimes beyond the “standard” 3DTV mode in which each viewer sees the same image pair.     

Evaluation of a new computer-assisted surgical planning and navigation system based on two-dimensional fluoroscopy for insertion of a proximal femoral nail: an experimental study

Pertrochanteric femoral fractures are common and intramedullary nailing is an accepted method for their surgical treatment. Accurate placement of the implant is essential to ensure fixation. The conventional technique can require multiple guide wire passes, and relies heavily on fluoroscopy. A computer-assisted planning and navigation system based on two-dimensional fluoroscopy for guide wire placement in the femoral neck has been developed, in order to perform intramedullary pertrochanteric fracture fixation using the proximal femoral nail (PFNA). The planning process was supported by a 'zero-dose C-arm navigation' system. The PFNA was inserted into 12, intact, femoral sawbones guided by the computer-based navigation, and into 12, intact, femoral sawbones using a conventional fluoroscopic-assisted technique. Guide wire and subsequent blade placement in the femoral neck was evaluated. The computer-assisted technique achieved a significant decrease in the number of required fluoroscopic images and in the number of guide wire passes. The obtained average blade placement accuracy in the femoral neck was equivalent to the conventional technique. The operation time was significantly longer in the navigation-assisted group. The addition of computer-assisted planning and surgical guidance to the intramedullary nailing of pertrochanteric femoral fractures offers a number of clinical benefits based on the results of this sawbone study. Further studies including fractured sawbones and cadaver models with extension of the navigation process to all steps of PFNA introduction and with the goal of reducing operation time are indispensable before integration of this navigation system into clinical practice.     

Functional and comparative study of lingual papillae in four species of bear (Ursidae) by scanning electron microscopy

The eight current species of bear (Ursidae) are widely distributed throughout Europe, Asia, and America. They are mainly encountered in the northern hemisphere, except for the spectacled bear and the sun bear, which are also found in the south of the equator. Adaptations of the masticatory apparatus (teeth, tongue, and musculature) to diet are one of the factors that imply the greatest structural changes in the cranium. This diet may be carnivorous, herbivorous, melliferous, or insectivorous, with one type of food predominating according to the time of year. The way in which food is eaten determines the morphology of the lingual surface; generally speaking, all bears put their mouth to the food, which, initially, they lick or they let the food stick to their tongue, as occurs when insects are eaten. As in all mammals, a distinction can be made between mechanical and gustatory papillae and the development and distribution of which depend on the species and their eating habits. In this study of the complete tongues of four species of adult bears, we describe the morphology of the lingual surfaces, the different types of papillae, their characteristics, and topographic distribution. It was seen that there were five main types of lingual papillae: filiform, conical, fungiform, foliate, and vallate. Morphology of the microgrooves and pores was similar to that observed in other mammals. In general, there were no great differences among the four species of bears studied, perhaps due to the similarity in the kind of food they consume in captivity.     

椭球封头圆柱形爆炸容器振动特性研究

对椭球封头圆柱形爆炸容器在中心点爆炸状态下的 19次有效炮实验给予了介绍并对实验结果的壳体振动特性进行了分析。理论和实验分析表明 ,在封闭容器内爆炸冲击载荷具有明显的脉冲激励特征 ;容器壳体的振动频谱主要受前 10阶固有频率的影响 ;随着冲击载荷的增加 ,其壳体的主振频率将趋于相应壳体的呼吸频率 ,其应变增长具有减少的趋势 ;联接螺栓的振动模态主要受相应圆柱壳体和封头轴向振动模态的影响 ,并出现了在时域上其振动模态在圆柱壳振动模态和封头轴向振动模态间跳变的现象。     

„Medizinische Notwendigkeit“: Herausforderungen eines unscharfen Begriffs

Definition of the problem

“Medical necessity” (MedN) is the central regulatory concept for decisions about which services are covered by German statutory health insurance. Despite its seeming objectivity and dependence on physicians’ expert judgment, the concept is by no means clearly defined.

Arguments

In this first of five planned papers on the conceptual analysis of MedN from the perspectives of philosophy and ethics of medicine, law, and (social) medicine, the focus lies on systemizing ongoing controversies.

Conclusion

Our goal is to come up with a so far missing foundation for detailed debates. We aim to clarify MedN’s conceptual structure, function, contextuality, and ambiguities as well as the fundamental limits of conceptual investigations for the normative questions at issue of regulating medical services.