An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

SIMULTANEOUS GC/MS ANALYSIS OF POLYCYCLIC AROMATIC HYDROCARBONS AND THEIR NITRATED DERIVATIVES IN ATMOSPHERIC PARTICULATE MATTER FROM WORKPLACES

Abstract

PAH are routinely analyzed using HPLC/FD. This technique is unsuitable for analyzing NPAH. This study aims at developing a reliable method, using GC/MS, and applying this technique to actual samples from small volumes of atmospheric particulate matter from workplaces. Mixtures of PAH and NPAH were separated by GC/MS and detected by electronic impact (EI) or negative ion chemical ionization (NICI). Analyses on twelve actual samples were thus carried out by sampling a small volume of atmosphere (≈0.5 m ³ ) from five different industrial workplaces. Samples displayed wide differences from one industrial workplace to another, and this can be explained by the specific methods applied. The PAH and NPAH concentrations also varied with time in the same industrial workplace. NPAH concentrations were not correlated with PAH concentrations, underscoring the complex chemical mechanisms involved in NPAH formation. PAH and NPAH formation appeared to be dependent on both industrial activities and uncontrolled physicochemical conditions.     

Adsorption of Alkanethiols on Gold Surfaces: PM-IRRAS Study of the Influence of Terminal Functionality on Alkyl Chain Orientation

The present paper focuses on a simplified method to study the orientation and the anisotropy of two different alkanethiols self-assembled monolayers on gold surfaces. The alkanethiols of interest vary only by their terminal functionalities (COOH and COOCH₃), thus allowing one to highlight the influence of these ending chemical groups on the final orientation of the adsorbed molecules. 11-Mercaptoundecanoic acid [HS-(CH₂)₁₀-COOH] and the methyl-11-mercaptoundecanoate [HS-(CH₂)₁₀-COOCH₃] were grafted under adequate conditions to obtain a high grafting density on gold substrates. These latter, before and after the alkanethiol adsorption, were analyzed mainly by the polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) technique to access orientation angles, and by atomic force microscopy (AFM) to check the homogeneity of the grafted layer.

By applying an original PM-IRRAS simplified method, the results showed an orientation closer to the normal of the surface plane in the case of the acid thiol compared with the ester one, which is probably because of the lateral hydrogen bonds established between the adjacent COOH functions. This method offers a direct and simple way to quantify the orientation angles in the alkanethiol nanofilms.     

PCA3 and PCA3-Based Nomograms Improve Diagnostic Accuracy in Patients Undergoing First Prostate Biopsy

While now recognized as an aid to predict repeat prostate biopsy outcome, the urinary PCA3 (prostate cancer gene 3) test has also been recently advocated to predict initial biopsy results. The objective is to evaluate the performance of the PCA3 test in predicting results of initial prostate biopsies and to determine whether its incorporation into specific nomograms reinforces its diagnostic value. A prospective study included 601 consecutive patients addressed for initial prostate biopsy. The PCA3 test was performed before ≥12-core initial prostate biopsy, along with standard risk factor assessment. Diagnostic performance of the PCA3 test was evaluated. The three available nomograms (Hansen’s and Chun’s nomograms, as well as the updated Prostate Cancer Prevention Trial risk calculator; PCPT) were applied to the cohort, and their predictive accuracies were assessed in terms of biopsy outcome: the presence of any prostate cancer (PCa) and high-grade prostate cancer (HGPCa). The PCA3 score provided significant predictive accuracy. While the PCPT risk calculator appeared less accurate; both Chun’s and Hansen’s nomograms provided good calibration and high net benefit on decision curve analyses. When applying nomogram-derived PCa probability thresholds ≤30%, ≤6% of HGPCa would have been missed, while avoiding up to 48% of unnecessary biopsies. The urinary PCA3 test and PCA3-incorporating nomograms can be considered as reliable tools to aid in the initial biopsy decision.     

Up-Regulation of mRNA Ventricular PRNP Prion Protein Gene Expression in Air Pollution Highly Exposed Young Urbanites: Endoplasmic Reticulum Stress,Glucose Regulated Protein 78, and Nanosized Particles

Mexico City Metropolitan Area children and young adults exposed to high concentrations of air pollutants including fine and ultrafine particulate matter (PM) vs. clean air controls, exhibit myocardial inflammation and inflammasome activation with a differential right and left ventricular expression of key inflammatory genes and inflammasomes. We investigated the mRNA expression levels of the prion protein gene PRNP, which plays an important role in the protection against oxidative stress and metal toxicity, and the glucose regulated protein 78, a key protein in endoplasmic reticulum (ER) stress signaling, in ventricular autopsy samples from 30 children and young adults age 19.97 ± 6.8 years with a lifetime of low (n:4) vs. high (n:26) air pollution exposures. Light microscopy and transmission electron microscopy studies were carried out in human ventricles, and electron microscopy studies were also done in 5 young, highly exposed Mexico City dogs. There was significant left ventricular PRNP and bi-ventricular GRP78 mRNA up-regulation in Mexico City young urbanites vs. controls. PRNP up-regulation in the left ventricle was significantly different from the right, p < 0.0001, and there was a strong left ventricular PRNP and GRP78 correlation (p = 0.0005). Marked abnormalities in capillary endothelial cells, numerous nanosized particles in myocardial ER and in abnormal mitochondria characterized the highly exposed ventricles. Early and sustained cardiac ER stress could result in detrimental irreversible consequences in urban children, and while highly complex systems maintain myocardial homeostasis, failure to compensate for chronic myocardial inflammation, oxidative and ER stress, and particles damaging myocardial organelles may prime the development of pathophysiological cardiovascular states in young urbanites. Nanosized PM could play a key cardiac myocyte toxicity role.     

Lithium conducting solid electrolyte Li1.3Al0.3Ti1.7(PO4)3 obtained via solution chemistry

NaSICON-type lithium conductor Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) is synthesized with controlled grain size and composition using solution chemistry. After thermal treatment at 850 °C, sub-micronic crystallized powders with high purity are obtained. They are converted into ceramic through Spark Plasma Sintering at 850–1000 °C. By varying the processing parameters, pellet with conductivities up to 1.6 × 10^?4 S/cm with density of 97% of the theoretical density have been obtained. XRD, FEG-SEM, ac-impedance and Vickers indentation were used to characterize the products. The influence of sintering parameters on pellet composition, microstructure and conductivity is discussed in addition to the analysis of the mechanical behavior of the grains interfaces.     

Preferentially oriented BaTiO3 thin films deposited on silicon with thin intermediate buffer layers

Barium titanate (BaTiO₃) thin films are prepared by conventional 2-methoxy ethanol-based chemical solution deposition. We report highly c-axis-oriented BaTiO₃ thin films grown on silicon substrates, coated with a lanthanum oxynitrate buffer layer of 8.9 nm. The influence of the intermediate buffer layer on the crystallization of BaTiO₃ film is investigated. The annealing temperature and buffer layer sintering conditions are optimized to obtain good crystal growth. X-ray diffraction measurements show the growth of highly oriented BaTiO₃ thin films having a single perovskite phase with tetragonal geometry. The scanning electron microscopy and atomic force microscopy studies indicate the presence of smooth, crack-free, uniform layers, with densely packed crystal grains on the silicon surface. A BaTiO₃ film of 150-nm thickness, deposited on a buffer layer of 7.2 nm, shows a dielectric constant of 270, remnant polarization (2P_r) of 5 μC/cm², and coercive field (E_c) of 60 kV/cm.     

Nitroxide-mediated polymerization of styrene initiated from the surface of fumed silica. Comparison of two synthetic routes

Nitroxide-mediated free radical polymerization of styrene was performed from 13 nm diameter fumed silica in two steps. First, an alkoxyamine, based on N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (DEPN) was covalently attached onto silica. Polystyrene chains with controlled molecular weights and narrow polydispersities were then grown from the alkoxyamine-functionalized nanoparticles surface in the presence of a ‘free’ sacrificial styrylDEPN alkoxyamine. Two strategies were investigated in order to immobilize the alkoxyamine initiator on the silica surface. In a first route, we synthesized a unimolecular alkoxyamine initiator carrying triethoxysilyl end groups reactive towards the silica surface. In a second route, the alkoxylamine was formed in situ by the simultaneous reaction of a polymerizable acryloxy propyl trimethoxysilane (APTMS), azobisisobutyronitrile (AIBN) and DEPN used as radical trap. In both cases, the grafting of both the initiator and the polystyrene chains was characterized and quantified by several techniques which allowed us to evaluate and compare the two strategies.     

Exploring the early steps of amyloid peptide aggregation by computers

The assembly of normally soluble proteins into amyloid fibrils is a hallmark of neurodegenerative diseases. Because protein aggregation is very complex, involving a variety of oligomeric metastable intermediates, the detailed aggregation paths and structural characterization of the intermediates remain to be determined. Yet, there is strong evidence that these oligomers, which form early in the process of fibrillogenesis, are cytotoxic. In this paper, we review our current understanding of the underlying factors that promote the aggregation of peptides into amyloid fibrils. We focus here on the structural and dynamic aspects of the aggregation as observed in state-of-the-art computer simulations of amyloid-forming peptides with an emphasis on the activation-relaxation technique.     

Mineral admixtures in mortars: Quantification of the physical effects of inert materials on short-term hydration

This work is the second part of an overall project, the aim of which is the development of general mix design rules for concrete containing different kinds of mineral admixtures. The first part presented the separation of the different physical effects responsible for changes in cement hydration when chemically inert quartz powders are used in mortars. This second part describes the development of an empirical model, based on semiadiabatic calorimetry measurements, which leads to the quantification of the enhancement of cement hydration due to the heterogeneous nucleation effect at short hydration times. Experimental results show that not all the admixture particles participate in the heterogeneous nucleation process. Consequently, the concept of efficient surface S_eff is introduced in the model. S_eff is the total admixture surface S (m² of mineral admixture/kg of cement) weighted by a function ξ(p). The efficiency function ξ(p) depends only on the replacement rate p and is independent of time, fineness and type of mineral admixture used. It decreases from 1 to 0: Low replacement rates give an efficiency value near 1, which means that all admixture particles enhance the hydration process. An efficiency value near 0 is obtained for high replacement rates, which indicates that, from the hydration point of view, an excess of inert powder does not lead to an increase in the amount of hydrates compared with the reference mortar without mineral admixture. The empirical model, which is mainly related to the specific surface area of the admixtures, quantifies the variation of the degree of hydration induced by the use of inert mineral admixtures. One application of the model, coupled with Powers' law, is the prediction of the short-term compressive strength of mortars.