Quantitative coherent anti-Stokes Raman scattering microspectroscopy using a nanosecond supercontinuum light source

We describe and characterize a multiplex CARS microspectroscopic system that uses a nanosecond supercontinuum generated from a photonic crystal fiber and a sub-nanosecond pulse laser. This system has a high spectral resolution (<0.1 cm^?1) and an ultrabroadband spectral coverage (>2500 cm^?1). The estimated spatial resolutions are 0.45 μm (lateral) and 4.5 μm (axial), respectively. This system enables us to obtain CARS spectra and corresponding images in the fingerprint region as well in the CH stretch region. Using this system, we have successfully obtained label-free and multi-mode vibrational images of a yeast cell.     

优秀人才缺乏导致大起大落欧洲教训为移动运营商敲响警钟

移动运营商在过去的12年中经历了一个爆发性增长的“火山期”和一个低增长的-一冰河期”。起落之间反映的是运营商在人才上的缺失,这一来自欧洲电信市场上的教训值得全球所有运营商警惕。     

Cell‐Tethered Ligands Modulate Bone Remodeling by Osteoblasts and Osteoclasts

The goals of the present study are to establish an in vitro co‐culture model of osteoblast and osteoclast function and to quantify the resulting bone remodeling. The bone is tissue engineered using well‐defined silk protein biomaterials in 2D and 3D formats in combination with human cells. Parathyroid hormone (PTH) and glucose‐dependent insulinotropic peptide (GIP) are selected because of their roles in bone remodeling for expression in tethered format on human mesenchymal stem cells (hMSCs). The cell‐modified biomaterial surfaces are reconstructed from scanning electron microscopy images into 3D models for quantitative measurement of surface characteristics. Increased calcium deposition and surface roughness are found in 3D surface models of silk protein films remodeled by co‐cultures containing tethered PTH, and decreased surface roughness is found for the films remodeled by tethered GIP co‐cultures. Increased surface roughness is not found in monocultures of hMSCs expressing tethered PTH, suggesting that osteoclast‐osteoblast interactions in the presence of PTH signaling are responsible for the increased mineralization. These data point towards the design of in vitro bone models in which osteoblast‐osteoclast interactions are mimicked for a better understanding of bone remodeling.     

5G meets satellite: Non-terrestrial network architecture and 3GPP

With 3GPP Release-17, global 5G standards now support non-terrestrial mobile networks comprising radio access network, terminals, and core network. This enables multi-vendor interoperability as well as interoperability with 3GPP-compliant 5G systems. This paper describes the key features enabling the NG-RAN architecture defined for 5G to support non-terrestrial networks. Starting from a general overview of NG-RAN and of the new paradigms of NTN, we introduce the NTN functionality in NG-RAN specifications with respect to feeder link switchover, cell handling, terminal registration, and OAM aspects. We also discuss different scenarios combining satellite access with 3GPP-defined core networks. We also describe some further enhancements expected to be seen in the next 3GPP release (Rel-18). We believe current and upcoming 3GPP work for NTN represents a solid basis on which 5G satellite networks can be built in the upcoming future.     

Energy Efficient Hardware Loop Based Optimization for CGRAs

Journal of Signal Processing Systems - Research interest and industry investment in edge computing solutions have increased dramatically in recent years. Consequent quest for balanced performance,...     

Impact of “terminal effect” on Cu electrochemical deposition: Filling capability for different metallization options

The 300 mm wafer copper electrochemical deposition (ECD) process for dual damascene metallization of semiconductor advanced interconnects is critically reviewed and the breakthroughs that enable further scaling of this process are examined. Special emphasis is placed on analyzing the critical issues, such as barrier/seed options, terminal effect and future plating prospects for this technology. The smallest plateable feature size values are estimated for different metallization integration schemes, such as conventional Physical Vapor Deposited (PVD) TaN/Ta/Cu, hybrid RuTa/Cu, CuMn (8%) self-forming barrier/seed, and Plasma-Enhanced Atomic Layer Deposition (PEALD) Ru, limiting the allowed maximum sheet resistance to 14 Ohms/sq for the Cu-based seeds and the effective maximum filling aspect ratio to 5-6.     

On‐Demand Wrinkling Patterns in Thin Metal Films Generated from Self‐Assembling Liquid Crystals

In this work, a new, universal method is described that uses the photopatterning of liquid crystals, which is accurately translated into a controlled, intricately wrinkled metal surface. Remarkably, the patterns have an oscillation in amplitude of the wrinkles. This rapid method allows generation of intricate multidomain patterns and continuous circular structures, including azimuthal, radial, and even higher complexity arrangements as examples. These wrinkled gold surfaces are also strikingly visual, which is interesting for applications ranging from diffractive elements to fine jewelry.     

Fully Electrical Modeling of Thermoelectric Generators with Contact Thermal Resistance Under Different Operating Conditions

The Seebeck effect is used in thermoelectric generators (TEGs) to supply electronic circuits by converting the waste thermal into electrical energy. This generated electrical power is directly proportional to the temperature difference between the TEG module’s hot and cold sides. Depending on the applications, TEGs can be used either under constant temperature gradient between heat reservoirs or constant heat flow conditions. Moreover, the generated electrical power of a TEG depends not only on these operating conditions, but also on the contact thermal resistance. The influence of the contact thermal resistance on the generated electrical power have already been extensively reported in the literature. However, as reported in Park et al. (Energy Convers Manag 86:233, 2014) and Montecucco and Knox (IEEE Trans Power Electron 30:828, 2015), while designing TEG-powered circuit and systems, a TEG module is mostly modeled with a Thévenin equivalent circuit whose resistance is constant and voltage proportional to the temperature gradient applied to the TEG’s terminals. This widely used simplified electrical TEG model is inaccurate and not suitable under constant heat flow conditions or when the contact thermal resistance is considered. Moreover, it does not provide realistic behaviour corresponding to the physical phenomena taking place in a TEG. Therefore, from the circuit designer’s point of view, faithful and fully electrical TEG models under different operating conditions are needed. Such models are mainly necessary to design and evaluate the power conditioning electronic stages and the maximum power point tracking algorithms of a TEG power supply. In this study, these fully electrical models with the contact thermal resistance taken into account are presented and the analytical expressions of the Thévenin equivalent circuit parameters are provided.     

Subsampling models and anti-alias filters for 3-D automultiscopic displays.

A new type of three-dimensional (3-D) display recently introduced on the market holds great promise for the future of 3-D visualization, communication, and entertainment. This so-called automultiscopic display can deliver multiple views without glasses, thus allowing a limited "look-around" (correct motion-parallax). Central to this technology is the process of multiplexing several views into a single viewable image. This multiplexing is a complex process involving irregular subsampling of the original views. If not preceded by low-pass filtering, it results in aliasing that leads to texture as well as depth distortions. In order to eliminate this aliasing, we propose to model the multiplexing process with lattices, find their parameters and then design optimal anti-alias filters. To this effect, we use multidimensional sampling theory and basic optimization tools. We derive optimal anti-alias filters for a specific automultiscopic monitor using three models: the orthogonal lattice, the nonorthogonal lattice, and the union of shifted lattices. In the first case, the resulting separable low-pass filter offers significant aliasing reduction that is further improved by hexagonal-passband low-pass filter for the nonorthogonal lattice model. A more accurate model is obtained using union of shifted lattices, but due to the complex nature of repeated spectra, practical filters designed in this case offer no additional improvement. We also describe a practical method to design finite-precision, low-complexity filters that can be implemented using modern graphics cards.     

3-D discrete analytical ridgelet transform.

In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines: 3-D discrete radial lines going through the origin defined from their orthogonal projections and 3-D planes covered with 2-D discrete line segments. These discrete analytical lines have a parameter called arithmetical thickness, allowing us to define a 3-D DART adapted to a specific application. Indeed, the 3-D DART representation is not orthogonal, It is associated with a flexible redundancy factor. The 3-D DART has a very simple forward/inverse algorithm that provides an exact reconstruction without any iterative method. In order to illustrate the potentiality of this new discrete transform, we apply the 3-D DART and its extension to the Local-DART (with smooth windowing) to the denoising of 3-D image and color video. These experimental results show that the simple thresholding of the 3-D DART coefficients is efficient.