An aggregation strategy of maximum size constraints in density-based topology optimization

Structural and Multidisciplinary Optimization - The maximum size constraint restricts the amount of material within a test region in each point of the design domain, leading to a highly constrained...     

Plasma spraying of stainless-steel particles coated with an alumina shell

The effect of an alumina coating, obtained by mechanofusion, on stainless-steel particles used in plasma spraying has been studied by examining sprayed particles in mid-flight and their resulting splats and coatings. The mean size of the injected powders is about 65 μm and the thickness of the alumina shell 4 μm. The results show that without preheating the substrate the splats of both types of powder are extensively fingered and become circular when the substrate surface is preheated over 200°C. For the case of the stainless steel/alumina composite splats, Energy dispersive spectroscopy (EDS) analysis of the distribution of the various elements shows that the alumina is either spread exactly on the stainless-steel splat or is dispersed in pieces and frozen over the surface of the stainless-steel splat. The first case corresponds to well molten particles where, after their flight in the plasma jet, all the alumina shell has flowed to the tail of the particle; the second case is related to particles which have still an alumina shell uniformly distributed around the stainless-steel core. Finally, a composite stainless steel/alumina coating sprayed on a rough (R_a 6.7±0.3 μm) stainless-steel substrate preheated to 400°C is compared with a pure stainless-steel coating. Both hardness and cohesion are found to improve for the alumina-coated particles.     

Influence of thermal treatments on Ag Sn Cu powders in order to reduce mercury contents in dental amalgam

The mercury content of dental amalgams is a controversial subject with regard to the biological properties of these materials. The object of this study is to optimize the thermal treatments performed on an experimental powder in order to obtain a low mercury ratio (41% by weight) while preserving the desirable clinical qualities of the material. Using atomized powder, two types of thermal treatments are performed: A1, to obtain a partially annealed structure and A2, to obtain a complete homogenization. The kinetics of the amalgamation reaction is mainly evaluated by X-ray diffraction to identify the newly formed phases as a function of setting time. Mechanical properties are evaluated according to the ISO norms at 37 °C. Metallographical examination of the amalgams shows a «Ag-Hg» phase which acts as a matrix incorporating the «Cu-Sn» and «Ag-Sn» compounds. The setting kinetics of the A1 amalgams is linear and slightly more rapid than that of the A2 amalgam. The mechanical properties of the amalgams are significantly improved regarding the higher mercury content commercial amalgams. A specific thermal treatment permits us to slow down the diffusion of mercury between the different intermetallic compounds into the powder. The final amalgam composition, thus, most approaches the stoechiometric ratio calculated from a quaternary diagram.     

L'appariement des styles de motivation et l'évolution de la satisfaction conjugale.

Examined whether couples tend to adopt self-determined motivational styles and observed the relationship between couples, motivation style pairings and marital satisfaction. The sample consisted of 226 married or cohabiting couples participating on a voluntary basis. 87 couples completed the questionnaires a 2nd time 36 mo later. The instruments used were the Couple Motivation Questionnaire and the Dyadic Adjustment Scale. Results showed that there is a significant relationship between women's and men's motivations to live together. The most frequent couples' pattern of pairing was 2 people with self-determined motivational styles. Furthermore, this couple pattern was related to higher marital satisfaction. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Multi-contact vertical ladder climbing with an HRP-2 humanoid

We describe the research and the integration methods we developed to make the HRP-2 humanoid robot climb vertical industrial-norm ladders. We use our multi-contact planner and multi-objective closed-loop control formulated as a QP (quadratic program). First, a set of contacts to climb the ladder is planned off-line (automatically or by the user). These contacts are provided as an input for a finite state machine. The latter builds supplementary tasks that account for geometric uncertainties and specific grasps procedures to be added to the QP controller. The latter provides instant desired states in terms of joint accelerations and contact forces to be tracked by the embedded low-level motor controllers. Our trials revealed that hardware changes are necessary, and parts of software must be made more robust. Yet, we confirmed that HRP-2 has the kinematic and power capabilities to climb real industrial ladders, such as those found in nuclear power plants and large scale manufacturing factories (e.g. aircraft, shipyard) and construction sites.     

Environmental Fatigue and Static Behavior of RC Beams Strengthened with Carbon-Fiber-Reinforced Polymer

Many countries around the world have tremendous needs to repair and strengthen their transportation infrastructure. Almost everywhere, traffic loads have reached levels largely exceeding design expectations. Northern countries also experience severe winter conditions that are combined with an extensive use of deicing salts and accelerate structural deterioration. In Canada, the extent of deterioration has prompted many authorities, including the federal and provincial governments, to investigate the potential use of fiber-reinforced polymer products to extend the life of their existing structures. However, it is widely recognized that the large-scale implementation of these products is often impaired by the lack of data on their durability. This paper presents an experimental project undertaken in order to assess the durability of reinforced concrete beams externally strengthened with two types of carbon-fiber-reinforced polymer (CFRP). The beams were first exposed to either wet-dry cycles or continuous immersion in water and then were loaded in fatigue. Finally, they were tested quasi-statically under four-point bending up to failure. The test results presented here provide some insights on the potential long-term performance of CFRP-strengthened beams exposed to severe environmental conditions.     

Shear Stress in Smooth Rectangular Open-Channel Flows

The average bed and sidewall shear stresses in smooth rectangular open-channel flows are determined after solving the continuity and momentum equations. The analysis shows that the shear stresses are function of three components: (1) gravitational; (2) secondary flows; and (3) interfacial shear stress. An analytical solution in terms of series expansion is obtained for the case of constant eddy viscosity without secondary currents. In comparison with laboratory measurements, it slightly overestimates the average bed shear stress measurements but underestimates the average sidewall shear stress by 17% when the width–depth ratio becomes large. A second approximation is formulated after introducing two empirical correction factors. The second approximation agrees very well (R2>0.99 and average relative error less than 6%) with experimental measurements over a wide range of width–depth ratios.     

Deactivation of metal catalysts in liquid phase organic reactions

The paper gives a general survey of the factors contributing to the deactivation of metal catalysts employed in liquid phase reactions for the synthesis of fine or intermediate chemicals. The main causes of catalyst deactivation are particle sintering, metal and support leaching, deposition of inactive metal layers or polymeric species, and poisoning by strongly adsorbed species. Weakly adsorbed species, poisons at low surface coverage and solvents, may act as selectivity promoters or modifiers. Three examples of long term stability studies carried out in trickle-bed reactor (glucose to sorbitol hydrogenation on Ru/C catalysts, hydroxypropanal to 1,3-propanediol hydrogenation on Ru/TiO₂ catalysts, and wet air oxidation of paper pulp effluents on Ru/TiO₂) are discussed.     

Productivity and mobility in academic research: evidence from mathematicians

Using an exhaustive database on academic publications in mathematics all over the world, we study the patterns of productivity by mathematicians over the period 1984–2006. We uncover some surprising facts, such as the weakness of age related decline in productivity and the relative symmetry of international movements, rejecting the presumption of a massive “brain drain” towards the US. We also analyze the determinants of success by top US departments. In conformity with recent studies in other fields, we find that selection effects are much stronger than local interaction effects: the best departments are most successful in hiring the most promising mathematicians, but not necessarily at stimulating positive externalities among them. Finally we analyze the impact of career choices by mathematicians: mobility almost always pays, but early specialization does not.     

Demonstration of the conditions conducive to agglomeration of zinc calcine in fluidized bed roasters

Agglomeration in the fluidized bed roasting of zinc sulphide concentrate was investigated in a continuous pilot-scale fluidized bed roaster. Alone or together, low stoichiometric excess oxygen (<10%) and high temperature (>940 °C) contributed most significantly to agglomeration of zinc calcine particles. Only one test – with 0% excess oxygen at 940 °C – led to severe agglomeration and subsequent defluidisation. Neither large initial particle size nor low gas superficial velocity promoted agglomeration as much as the combination of low stoichiometric excess oxygen and high temperature.Lead sulphide, a common impurity in zinc sulphide concentrate, also appeared to have played a key role in agglomeration. Both low excess oxygen and high temperature favoured a high partial pressure of sublimated lead sulphide. Upon contact with oxygen, lead sulphide oxidised to lead oxide, which then precipitated as a liquid onto the rather inert bed particles. As a liquid, lead oxide formed coatings that caused small particles to adhere to larger ones, as well as liquid bridges that bound particles together.