Hybrid photocatalytic membranes embedding decatungstate for heterogeneous photooxygenation

The incorporation of decatungstate in polymeric membranes provides new heterogeneous photocatalysts for the oxidation of organic substrates under oxygen atmosphere at 25 °C. Photocatalytic membranes have been prepared yielding polymeric films with a high thermal, chemical and mechanical stability (PVDF, PDMS, Hyflon). Surface spectroscopy techniques including transmittance and reflectance UV-Vis and FT-IR have been used to assess the photocatalyst integrity within the polymeric support. Catalyst screening has been performed under both homogeneous and heterogeneous photooxygenation conditions. The photocatalyst activity has been evaluated in terms of the substrate conversion, turnover numbers, and recycling experiments. A membrane induced selectivity behavior has been evidenced by comparison with homogeneous oxidations.     

Introductory Paper

In today’s competitive market designing of digital systems (hardware as well as software) faces tremendous challenges. In fact, notwithstanding an ever decreasing project budget, time to market and product lifetime, designers are faced with an ever increasing system complexity and customer expected quality. The above situation calls for better and better formal verification techniques at all steps of the design flow. This special issue is devoted to publishing revised versions of contributions first presented at the 12th Advanced Research Working Conference on Correct Hardware Design and Verification Methods (CHARME) held 21–24 October 2003 in L’Aquila, Italy. Authors of well regarded papers from CHARME’03 were invited to submit to this special issue. All papers included here have been suitably extended and have undergone an independent round of reviewing.     

Saw and digital technologies in mutlicarrier demodulators

One key technology, for the implementation of future on-board processing payloads, is the multicarrier demodulator (MCD). The MCD is instrumental in allowing FDMA/TDM access schemes which optimize the use of on-board and ground resources in VSAT networks. This paper deals with the analogue and digital implementations of MCD, trying to assess the fields of application of each of the two technologies.     

Steel-to-concrete bond after concrete splitting: test results

The definite trend towards the use of large-diameter rebars and the introduction of high-strength steels (f _y=500 to 600 MPa) make it necessary to study the effects of longitudinal splitting on the steel-to-concrete bond. The study of splitting effects requires firstly basic tests to be performed in order to gather experimental information on bond and confinement stresses acting at the bar-to-concrete interface. For this purpose, three series of tests were recently carried out at the Politecnico di Milano. The results make it possible to ascertain a few basic properties of the bond after concrete splitting, and to formulate empirical constitutive laws regarding the stresses and the displacements (bar slip and opening of the splitting crack). All specimens consisted of a short deformed bar embedded in a concrete block, which had a preformed splitting crack in the plane passing through the bar axis: twelve specimens (Tests A and C) were fitted up with a round deformed bar having crescent-shaped lugs (D_b=18 mm); seven specimens (Tests B) were fitted up with a specially machined deformed bar having a rectangular cross-section and straigth, lugs, so that concrete deterioration close to the bar could be investigated at the surface of the specimen, by means of the moiré technique. The tests were carried out at constant slip rate, up to very large slip values ( ); both the ascending and the descending branches of the stress-slip curves were measured, for four different values of the opening of the splitting crack. The agreement among the results of the three series is generally satisfactory and often very good: consequently, constitutive laws regarding the four main variables (crack opening and bar slip, shear and confinement stresses) can be worked out, as will be shown in a companion paper on constitutive relationships and on concrete deterioration at the bar-to-concrete interface.     

Modeling guided wave propagation with application to the long-range defect detection in railroad tracks

The aim of this work is to demonstrate the use of a commercial finite element package, ABAQUS EXPLICIT, to model ultrasonic guided waves in structural components. The particular application of interest is modeling the interaction of a broadband vertical bending mode with transverse-type defects in railroad tracks. This topic is part of a broader project on high-speed defect detection in rails by long-range ultrasonic inspections. Reflection coefficient spectra in the 20–45 kHz range are obtained for four different sizes and three different orientations of transverse head flaws. A preliminary study of Lamb waves in a free plate helps drawing modeling guidelines for the rail.     

Microstructured Lipid Carriers (MLC) Based on N-Acetylcysteine and Chitosan Preventing Pseudomonas aeruginosa Biofilm

The aim of this work was the development of microstructured lipid carriers (MLC) based on chitosan (CH) and containing N-acetylcysteine (NAC), a mucolytic and antioxidant agent, to inhibit the formation of Pseudomonas aeruginosa biofilm. MLC were prepared using the high shear homogenization technique. The MLC were characterized for morphology, particle size, Z potential, encapsulation efficiency and drug release. The antioxidant properties of NAC-loaded microstructured carriers were evaluated through an in vitro spectrophotometer assay. Finally, the activity of NAC-CH-MLC on biofilm production by Pseudomonas aeruginosa was also evaluated. Results obtained from this study highlighted that the use of chitosan into the inner aqueous phase permitted to obtain microstructured particles with a narrow size range and with good encapsulation efficiency. NAC-loaded MLC showed higher antioxidant activity than the free molecule, demonstrating how encapsulation increases the antioxidant effect of the molecule. Furthermore, the reduction of biofilm growth resulted extremely high with MLC being 64.74% ± 6.2% and 83.74% ± 9.95%, respectively, at 0.5 mg/mL and 2 mg/mL. In conclusion, this work represents a favorable technological strategy against diseases in which bacterial biofilm is relevant, such as cystic fibrosis.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Evidence for a Negative Correlation between Human Reactive Enamine-Imine Intermediate Deaminase A (RIDA) Activity and Cell Proliferation Rate: Role of Lysine Succinylation of RIDA

Reactive intermediate deaminase (Rid) proteins are enzymes conserved in all domains of life. UK114, a mammalian member of RidA subfamily, has been firstly identified as a component of liver perchloric acid-soluble proteins (L-PSP). Although still poorly defined, several functions have been attributed to the mammalian protein UK114/RIDA, including the reactive intermediate deamination activity. The expression of UK114/RIDA has been observed in some tumors, arousing interest in this protein as an evaluable tumor marker. However, other studies reported a negative correlation between UK114/RIDA expression, tumor differentiation degree and cell proliferation. This work addressed the question of UK114/RIDA expression in human non-tumor HEK293 cell lines and in some human tumor cell lines. Here we reported that human RIDA (hRIDA) was expressed in all the analyzed cell line and subjected to lysine (K-)succinylation. In HEK293, hRIDA K-succinylation was negatively correlated to the cell proliferation rate and was under the control of SIRT5. Moreover, K-succinylation clearly altered hRIDA quantification by immunoblotting, explaining, at least in part, some discrepancies about RIDA expression reported in previous studies. We found that hRIDA was able to deaminate reactive enamine-imine intermediates and that K-succinylation drastically reduced deaminase activity. As predicted by in silico analysis, the observed reduction of deaminase activity has been related to the drastic alterations of hRIDA structure inferred by K-succinylation. The role of hRIDA and the importance of its K-succinylation in cell metabolism, especially in cancer biology, have been discussed.