K_2O－CaO－Al_2O_3－SiO_2系统自释釉瓷化学组成的研究

本文从酸度系数着手，证实了Ｋ２Ｏ－ＣａＯ－Ａｌ４Ｏ久－ＳｉＯ２系统中存在自释釉组成，限定了其组成范围，０．６７％＜Ｋ２Ｏ＜１．２８％，１０．６４％＜ＣａＯ＜１３．６２％，１１．５３％＜Ａｌ４Ｏ３＜１５．３２％，７２．７３％＜ＳｉＯ２＜７４．０４％，并讨论了自释釉瓷的性能。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

环氧树脂/蒙脱土纳米复合材料性能的研究

用一种新型的热稳定性较好的改性剂2，2’-二[4-(4-氨基苯氧基)苯基]-丙烷(BAPP)改性钠基蒙脱土，再与环氧树脂进行纳米复合制备了环氧树脂／蒙脱土纳米复合材料。讨论了蒙脱土用量对环氧树脂／蒙脱土纳米复合材料性能的影响，并对其结构和性能进行了表征和测试。结果表明：改性使蒙脱土层间距变大，制备出的环氧树脂／蒙脱土纳米复合材料剥离结构较好，环氧树脂／蒙脱土纳米复合材料的玻璃化转变温度和动态储能模量随改性蒙脱土用量的增加呈现较好的递增趋势。     

A110－1－H／A110－1型氨合成催化剂在双筐并流合成塔中的使用

在双筐并流氨合成塔中使用了Ａ１１０－１－Ｈ／Ａ１１０－１型氨合成催化剂，使用寿命达１７４０天，累计产氨４３８３７８ｔ．该催化剂组合具有低温活性好、易还原、高催化活性、高抗毒能力、良好的热稳定性与破碎强度等优点．     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

货架喷塑前处理工艺的选择与应用

介绍了CZ99-03(7)常温锌系磷化剂在货架上的应用,根据货架构件的特点,优化货架喷塑前处理工艺,讨论了影响磷化质量的工艺因素,提出了提高磷化效果的措施以及进一步改进磷化工艺的工艺设计。     

探索行动导向教学法在网络架构课程教学改革中的应用

技工学校是以技术型人才培养为目的的学生能力养成和技能操作的教育基地,为确保人才培养质量,学校需要加强对市场形势的把握和教学改革的控制。行动导向教学法是目前广泛应用于技校和职校教学课堂的、有较好实际作用的教学方法,文章以行动导向教学法为重点,以配置交换机实现VLAN学习任务为案例,在教学方法和手段等几个方面讨论了行动导向教学法在网络架构课程教学改革中的研究与实践。     

改性膨润土对甲基橙的吸附

在用Cu^2 A‘^3 Fe^3 对膨润土改性中，Fe^3 改性的膨润土对甲基橙的吸附性能最好，在振荡20分钟后即可达到吸附平衡。pH=3～7、用量为3g／L、25℃时对甲基橙的吸附量达到最大，在pH=7及常温条件下，铁基膨润土的用量为11g／L时，对浓度为250mg／L甲基橙的吸附量和去除率分别为22.2mg／g98．6％；对浓度为40mg／L的甲基橙去除率达97.1％。     

下期要目

在电气自动控制的设计过程中，设计者根据生产工艺要求和生产控制过程用经验设计法设计出来的控制电路，虽然通过了试验和一定时间的实践验证。但是随着时间的推移，其存在的隐性危害便会逐渐暴露出来，电气自动控制中寄生回路的存在及其隐性危害便是一例。