EC与~（99m）Tc－GH之间的配体交换反应动力学研究

实验表明，ＥＣ浓度与配体交换反应速度常数无关，体系的ｐＨ值对速度常数和９９ｍＴｃ－ＥＣ的标记率影响较大。测定并计算了不同ｐＨ值的交换反应速度常数。结果表明，为保证用配体交换法制备９９ｍｃ－ＥＣ时９９ｍｃ－ＥＣ的标记率大于９０％，体系的ｐＨ值必须≥８。     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

基于互联网实现多种信息传输技术

随着信息技术的迅速发展,使用互联网实现楼宇内电话、电视、电脑、安防和环境监控、计量数据等信息的合路传输,是实现智能家居和数字楼宇的一种主要发展趋势。最终目的,实现对物和过程的智能化感知。文章首先介绍信息合路编码、中央控管电路,然后介绍网络接口电路原理和系统体系构架。重点介绍多种多样的信息传输技术。它对现代楼宇信息化、智能化建设有很好的参考作用。     

A fonnalism for generating multiparametric encoding gradients in NMR tomography

A general mathematical formalism for generating multiparametric NMR image encoding gradients is introduced. The new schematic approach enables one to construct any desired encoding gradient which may be used in an imaging sequence. Basic gradient waveforms which can be used as building blocks of the desired encoding gradients are presented. A matrix operator for obtaining the encoding gradient for any kind of phase encoding is derived. Specific examples illustrating how to obtain "pure" spatial, velocity, or acceleration encoding gradients for moving spins are presented.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

工艺参数对PP挤出发泡泡孔结构的影响

研究了螺杆转速、机头口模形状以及机头温度对挤出发泡聚丙烯(PP)泡孔结构的影响。结果表明：在挤出发泡过程中，一定配方、机头形状和温度下，螺杆转速存在最佳值；机头形状越有利于建立高压，制得的泡沫的泡孔越细密均匀且发泡倍率越高；机头口模温度在保证顺利挤出情况下．越低越有利于制得高发泡倍率的泡沫。     

我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

Collaborative representation with reduced residual for face recognition

Collaboration representation-based classification (CRC) was proposed as an alternative approach to the sparse representation method with similar efficiency. The CRC is essentially a competition scheme for the training samples to compete with each other in representing the test sample, and the training class with the minimum representation residual from the test sample wins the competition in the classification. However, the representation error is usually calculated based on the Euclidean distance between a test sample and the weighted sum of all the same-class samples. This paper exploits alternative methods of calculating the representation error in the CRC methods to reduce the representation residual in a more optimal way, so that the sample classes compete with each other in a closer range to represent the test sample. A large number of face recognition experiments on three face image databases show that the CRC methods with optimized presentation residual achieve better performance than the original CRC, and the maximum improvement in classification accuracy is up to 12 %.     

可降解聚丙烯发泡塑料初探

开发可降解聚丙烯(PP)发泡制品具有广阔的发展前景。PP自身的化学结构特点使其具有比其它聚烯烃和PS更优异的降解性能。在PP中添加各种光降解剂,或引入光敏基团可以促进PP的光降解性;将其与天然高分子或各种可降解塑料混合也可以有效促进PP的生物降解;将降解和发泡的配方和工艺合理结合以获得光降解性、生物降解性或光 生物双降解的发泡PP制品是完全可能的。