新型的芯片间互连用CMOS/BiCMOS驱动器

从改善不同类型 IC芯片之间的电平匹配和驱动能力出发 ,设计了几例芯片间接口 (互连 )用 CMOS/Bi CMOS驱动电路 ,并提出了采用 0 .5 μm Bi CMOS工艺 ,制备所设计驱动器的技术要点和元器件参数。实验结果表明所设计驱动器既具有双极型电路快速、大电流驱动能力的特点 ,又具备 CMOS电路低压、低功耗的长处 ,因而它们特别适用于低电源电压、低功耗高速数字通信电路和信息处理系统。     

西北低煤阶盆地生物成因煤层气成藏模拟研究

在美国粉河、澳大利亚苏拉特等低煤阶盆地煤层气勘探取得突破以前,一直认为具有商业价值的煤层气资源主要存在于中煤阶的煤层中,煤阶太低,一般含气量不高,不具有勘探价值。但是近几年来的发现证实,低煤阶盆地煤层厚度大,渗透率高,资源丰度大,含气饱和度高,同样可获得商业性气流,而且从其气体的成因来看,其中有很大一部分是生物成因的煤层气。利用煤层气成藏模拟装置对低煤阶含煤盆地的煤岩样品开展成藏模拟,从实验角度证明了中国西北地区虽然煤层煤阶较低,热成因气较少,但是却存在着具有商业价值的二次生物成因的甲烷气,再加上含煤层系众多,煤层厚度大,资源丰度极高,仍具有巨大的勘探潜力。      

Wavelength and Waveband Assignment for Ring Networks Based on Parallel Multi‐granularity Hierarchical OADMs

In this paper we study the optimization issues of ring networks employing novel parallel multi‐granularity hierarchical optical add‐drop multiplexers (OADMs). In particular, we attempt to minimize the number of control elements for the off‐line case. We present an integer linear programming formulation to obtain the lower bound in optimization, and propose an efficient heuristic algorithm called global bandwidth resource assignment that is suitable for the design of large‐scale OADM networks.     

HDI工艺中取代涂树脂铜箔适合激光钻孔的半固化片

应用于HDI的激光钻孔半固化片的方法和其它常规材料相比具有的优缺点。     

Comments on "An efficient PML implementation for the ADI-FDTD method"

For original paper see Wang and Teixeira (IEEE Microwave Wireless Comp. Lett., vol.13, p.72-4, 2003 February). In this paper, a more precise way to evaluate the actual performance of the perfectly matched layer (PML) used for the alternating direction implicit finite-difference time-domain (ADI-FDTD) method is presented. It is shown that the intrinsic numerical dispersion error of the ADI-FDTD method must be taken into account when the actual performance of the ADI-PML (as well as the ADI-FDTD method) is evaluated. Most importantly, it is demonstrated that the ADI-PMLs implemented with either the traditional manner or the way proposed in have almost the same level of accuracy when the performance of the ADI-PML is correctly evaluated.     

Fatigue crack growth in SiC particulates reinforced Al matrix graded composite

The SiC/Al graded composite was fabricated by powder metallurgy processing and its fatigue crack growth behavior was studied. The volume percentage of SiC particulates was distributed from 5 to 30% layer by layer on the cross section. Since the aluminium was dissolved together, there was no evident interface between the two layers with different volume fraction of SiC particulates. Fatigue crack growth was in direction of from 5 to 30% SiC layers under sinusoidal wave-form. The retardation of fatigue crack growth was found when crack propagated from low volume fraction of SiC to high volume fraction of SiC. The crack deflection and branching between two layers were observed, which decreased crack growth rates. In view of crack tip driving force, the plasticity mismatch between the layers shielded crack tip driving force, i.e. decreased the effective J-integral at the tip of the crack as the plastic zone of the crack tip spread from the weaker material into the stronger material.     

阜阳地区石炭-二叠系煤系烃源岩特征

阜阳地区石炭-二叠系煤系地层发育，但由于勘探程度较低，对该区煤系地层烃源岩的生烃潜力认识不清，严重制约了该区的油气勘探。在已有资料的基础上，通过有机地球化学和有机岩石学方法并结合模拟实验，探讨了该区煤系烃源岩的生烃潜力。研究结果表明阜阳地区石炭-二叠系煤系烃源岩有机质丰度达到中等-好烃源岩标准，有机质类型以腐殖型为主，盆地模拟结果显示阜阳地区石炭-二叠系煤系地层油资源量为（30.47~152.33）×10⁶t，气资源量为（266.7～1333.7）×10⁸m³，展示阜阳地区石炭-二叠系煤系地层具有较好的生油气潜力。     

时频域自动识别与压制高频噪声

本文在分析张宇等及钱忠平等提出的高频噪声判别准则基础上,利用夏洪瑞等根据在窄档等频距小波分频之后识别、压制高频噪声的思路,提出在时频域将代表地震道主要能量的几个频带的平均振幅绝对值作为正常子波的平均振幅绝对值,以此来识别和压制高频噪声的异常振幅。实际处理结果表明,此法不仅可以压制高频谐振及高频突发噪声,而且可以保护弱地震反射信号不受损害。     

世界原油质量趋势及我国面临的挑战

评述了世界原油质量趋势、我国重质油现状以及我国加工含硫原油的现状和前景。     

Study on the inhibiting behavior of AMT on bronze in 5% citric acid solution

The corrosion behavior of bronze in the presence of 2-amino-5-mercapto-1,3,4-thiadiazole (AMT) has been investigated in 5% citric acid by electrochemical measurements such as potentiodynamic polarization method and electrochemical impedance spectroscopy (EIS). It has been revealed that AMT is a good inhibitor for bronze. Both cathodic process and anodic process on bronze treated with AMT were different from that on the bronze without AMT treatment. Fourier transform infrared (FTIR) analysis was carried out to characterize the protective film, which revealed that the composition of the protective film was polymeric Cu(I)-inhibitor complex. AMT acted as bidentate ligand through the aminic nitrogen atom and the closed ring nitrogen in the complex.