Multicomponent Physical Vapor Deposited Films with Homogeneous Molecular Material Distribution Featuring Improved Resist Sensitivity

Each film preparation technique affects the physical properties of the resulting coating and thus defines its applicability in modern device construction. In this context solvent based spin coated and solvent‐free physical vapor deposited molecular glass photoresist films are systematically investigated for their dissolution behavior, sensitivity, and overall lithographic performance. These investigations demonstrate that the solvent‐free physical vapor deposition leads to a marked increase in sensitivity. This could be explained by the individual molecule by molecule deposition step producing a more homogeneous distribution of the multicomponent resist system, especially the photoacid generator. In addition, this assumption is supported by former published simulations focusing on aggregate formation within thin films. This work demonstrates that the lithographic sensitivity of multicomponent resist system is an intrinsic parameter to investigate molecular material distribution and indicates that the applied film preparation technique is crucial for the corresponding performance and applicability.     

Electrically Tunable Nanoporous Carbon Hybrid Actuators

A novel nanoporous carbon/electrolyte hybrid material is reported for use in actuation. The nanoporous carbon matrix provides a 3D network that combines mechanical strength, light weight, and low cost with an extremely high surface area. In contrast to lower dimensional nanomaterials, the nanoporous carbon matrix can be prepared in the form of macroscopic monolithic samples that can be loaded in compression. The hybrid material is formed by infiltrating the free internal pore volume of the carbon with an electrolyte. Actuation is prompted by polarizing the internal interfaces via an applied electric bias. It is found that the strain amplitude is proportional to the Brunauer‐Emmett‐Teller (BET) mass specific surface area, with reversible volume strain amplitudes up to the exceptionally high value of 6.6%. The mass‐specific strain energy density compares favorably to reported values for piezoceramics and for nanoporous metal actuators.     

Layer‐Controlled and Wafer‐Scale Synthesis of Uniform and High‐Quality Graphene Films on a Polycrystalline Nickel Catalyst

Chemical vapor deposition (CVD) provides a synthesis route for large‐area and high‐quality graphene films. However, layer‐controlled synthesis remains a great challenge on polycrystalline metallic films. Here, a facile and viable synthesis of layer‐controlled and high‐quality graphene films on wafer‐scale Ni surface by the sequentially separated steps of gas carburization, hydrogen exposure, and segregation is developed. The layer numbers of graphene films with large domain sizes are controlled precisely at ambient pressure by modulating the simplified CVD process conditions and hydrogen exposure. The hydrogen exposure assisted with a Ni catalyst plays a critical role in promoting the preferential segregation through removing the carbon layers on the Ni surface and reducing carbon content in the Ni. Excellent electrical and transparent conductive performance, with a room‐temperature mobility of ≈3000 cm² V^?1 s^?1 and a sheet resistance as low as ≈100 Ω per square at ≈90% transmittance, of the twisted few‐layer grapheme films grown on the Ni catalyst is demonstrated.     

Cryptanalysis of a dynamic ID‐based remote user authentication with key agreement scheme

A dynamic user authentication scheme allows a user and a remote server to authenticate each other without leaking the user's identity. In 2011, Wen and Li proposed an improved dynamic ID‐based remote user authentication with key agreement scheme for mobile and home networks. They claimed that their scheme was more secure than the scheme of Wang et al. However, we demonstrate that their scheme is vulnerable to the privileged insider, off‐line password guessing, impersonation, and server spoofing attacks. At the same time, it does not provide any user anonymity and forward secrecy property. Thus, it is not feasible for real‐life implementation.Copyright © 2012 John Wiley & Sons, Ltd.     

Wireless Energy Transfer System with Multiple Coils via Coupled Magnetic Resonances

A general equivalent circuit model is developed for a wireless energy transfer system composed of multiple coils via coupled magnetic resonances. To verify the developed model, four types of wireless energy transfer systems are fabricated, measured, and compared with simulation results. To model a system composed of n‐coils, node equations are built in the form of an n‐by‐n matrix, and the equivalent circuit model is established using an electric design automation tool. Using the model, we can simulate systems with multiple coils, power sources, and loads. Moreover, coupling constants are extracted as a function of the distance between two coils, and we can predict the characteristics of a system having coils at an arbitrary location. We fabricate four types of systems with relay coils, two operating frequencies, two power sources, and the function of characteristic impedance conversion. We measure the characteristics of all systems and compare them with the simulation results. The flexibility of the developed model enables us to design and optimize a complicated system consisting of many coils.     

16‐QAM‐Based Highly Spectral‐Efficient E‐band Communication System with Bit Rate up to 10 Gbps

This paper presents a novel 16‐quadrature‐amplitude‐modulation (QAM) E‐band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71‐76 GHz/81‐86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16‐QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up‐/down‐conversion mixer are implemented using a 0.1 µm gallium arsenide pseudomorphic high‐electron‐mobility transistor (GaAs pHEMT) process. A single‐IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed‐Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^?5 at a signal‐to‐noise ratio of about 21.5 dB.     

Small‐Size and High‐Isolation MIMO Antenna for WLAN

A small‐sized (15 mm×30 mm) planar monopole MIMO antenna that offers high‐isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander‐line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T‐shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S₂₁) is about –30 dB, and the envelope correlation coefficient is less than 0.1.     

Bandwidth‐satisfied routing in multi‐rate MANETs by cross‐layer approach

Previous quality‐of‐service (QoS) routing protocols in mobile ad hoc networks (MANETs) determined bandwidth‐satisfied routes for QoS applications. Since the multi‐rate enhancements have been implemented in MANETs, QoS routing protocols should be adapted to exploit them fully. However, existing works suffer from one bandwidth‐violation problem, named the hidden route problem (HRP), which may arise when a new flow is permitted and only the bandwidth consumption of the hosts in the neighborhood of the route is computed. Without considering the bandwidth consumption to ongoing flows is the reason the problem is introduced. This work proposes a routing protocol that can avoid HRP for data rate selection and bandwidth‐satisfied route determination with an efficient cross‐layer design based on the integration of PHY and MAC layers into the network layer. To use bandwidth efficiently, we aim to select the combination of data rates and a route with minimal bandwidth consumption to the network, instead of the strategy adopted in the most previous works by selecting the combination with the shortest total transmission time. Using bandwidth efficiently can increase the number of flows supported by a network. Copyright 2010 John Wiley & Sons, Ltd.     

保偏光纤的应力双折射与结构优化

简单介绍了保偏光纤的应力双折射,并着重介绍了应用有限元法对"一"字型与熊猫型结构保偏光纤的应力双折射的对比分析.分析结果表明,对"一"字型而言,纤芯区的双折射在一定范围内随应力区的长度及宽度加大而增大;在相同剖面结构参数条件下,"一"字型光纤应力区对双折射的贡献约为熊猫型光纤的1.3倍;无论是何种结构的保偏光纤,缩小应力区与纤芯之间的距离是增大纤芯区双折射更为有效的途径.同时对保偏光纤结构优化的趋势进行了展望.     

基于CPLD的四路数字视频光端机的设计

对输出端视频信号的处理是光端机设计的关键.文章首先简要介绍了四路数字视频光端机的系统架构和工作原理,然后详细描述了基于CPLD的四路数字视频光端机的设计过程,最后对实验结果作了分析.相比传统的光端机,本系统在硬件设计上对输出端视频信号处理方面作了改进,选择具有DirectDrive技术的MAX9530对视频信号进行处理,很好地解决了视频信号的干扰问题,同时提高了视频图像的质量.