An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

Considerations for polarization insensitive optical switching and modulation using strained InGaAs/InAlAs quantum well structure

It is shown that In/sub 1-x/Ga/sub x/As/In/sub 0.52/Al/sub 0.48/As MQW structures with the wells under tensile strain obtained by the appropriate selection of the Ga mole fraction and well size can achieve polarization-insensitive optical switching and modulation for a wide range of wavelengths between 1.0 and 1.6 mu m. For example, a change in refractive index of -0.5% at about 1.55 mu m will facilitate an intersectional angle of more than 10 degrees in a total internal reflection switch which can be readily fabricated. Hence, this material system is promising for long-wavelength polarization-insensitive semiconductor optoelectronic devices.<>     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

Theoretical foundation of the 80/20 rule

A rigorous analysis of the 80/20 rule is made using an index for the observed values of the variables. Three important findings are identified. First, a sufficient condition is provided for Burrell's inverse relationship between minimum holdings and average circulation rate. Second, an indexed version of Lotka's law is used to derive a sufficient condition for Egghe's finding on the 80/20 rule. Third, through the computer simulations of the Simon-Yule model of Lotka's law, we identify the entry rate of new holdings as well as the number of circulations when the entry rate is a decreasing function to be crucial factors for the pattern of the 80/20-type curve.     

Evaluation of the efficacy of sequential intravenous-oral administration of pefloxacin in community-acquired lower respiratory tract infections in patients with underlying conditions

We studied the efficacy of sequential intravenous-oral pefloxacin therapy in community-acquired lower respiratory tract infection in 24 patients with one or more underlying conditions. Twenty-eight patients were enrolled into the study but only 24 patients were evaluated. There were 16 males and 8 females with a mean age of 66.9 +/- 11.2 years (mean +/- SD, range 46 to 87 years). The underlying conditions present were bronchiectasis, chronic obstructive lung disease and diabetes mellitus. Patients who were older than 70 years but without any underlying condition were also enrolled. All received 4 days of intravenous pefloxacin 400 mg twice a day followed by oral pefloxacin 400 mg twice a day for another 10 days. Assessment of success was based on clinical, microbiological and radiological improvement. Pefloxacin produced 79.2% clinical cure rate. Another 8.3% showed improvement. Pefloxacin was well tolerated. There were few adverse effects and none of the patients required a change of antibiotic. Pefloxacin was an effective and well tolerated treatment for respiratory tract infection and had the advantage of broad in-vitro antibacterial activity, twice daily dosing and sequential availability in an intravenous and oral formulation.     

Analysis of Electromagnetic Scattering from an Eccentric Multilayered Sphere

An exact analytic solution of a plane electromagnetic (EM) wave scattered by an eccentric multilayered sphere (EMS) is obtained. It is assumed that the layers are perfect dielectrics and that the innermost core is a perfectly conducting sphere. Each center of a layer is translated along the incident axis. All fields are expanded in terms of the spherical vector wave functions with unknown expansion coefficients. The addition theorem for spherical wave functions is used prior to applying the boundary conditions. The unknown coefficients are determined by solving a system of linear equations derived from the boundary conditions. Numerical results of the scattering cross sections are presented on the plane of φ=0 degrees and φ=90 degrees. The convergence of modal solutions and the characteristics of patterns are examined with various geometries and permittivity distributions     

Prediction of fatigue screw loosening in anterior spinal fixation using dual energy x-ray absorptiometry

STUDY DESIGN: A biomechanical study was performed to investigate a relation between the bone mineral density of the vertebral body and the number of loading cycles to induce fatigue loosening of an anterior vertebral screw. OBJECTIVES: The objective of this study was to investigate the potential usefulness of dual energy x-ray absorptiometry of measuring bone mineral density of the vertebral body in predicting the fatigue loosening of th anterior vertebral screw. SUMMARY OF BACKGROUND DATA: Loosening of the vertebral body screw is a well know failure in spinal instrumentation, and more commonly observed than pullout failure. The relation between bone mineral density and pullout strength of the screw has been investigated previously, but no studies are available on the fatigue loosening in anterior spinal fixation. METHODS: Bone mineral density was measured using dual energy x-ray absorptiometry and the screw loosening was produce by a cyclic loading in the cephalad-caudal direction. Screw loosening was defined as 1 mm displacement of the screw relative to bone, and the number of loading cycles to induce the screw loosening was obtained and statistically correlated with bone mineral density. RESULTS: There was a positive correlation between the number of loading cycles to induce screw loosening and bone mineral density (R = 0.8, P < 0.01). The average number of loading cycles to induce screw loosening was significantly less for specimens with bone mineral density < 0.45 g/cm2 compared to those with bone mineral density > or = g/cm2. CONCLUSIONS: These findings suggest that bone mineral density may be a good predictor of anterior vertebral screw loosening. Bone mineral density < 0.45 g/cm2 may be critical value of loosening of the anterior vertebral body screw. However, further biomechanical and clinical studies are required before using threshold value clinically.     

Ultra-wideband (from DC to 110 GHz) CPW to CPS transition

A new ultra-wideband, low-loss and small-size coplanar waveguide (CPW) to coplanar strip (CPS) transition which can be used from DC to 110 GHz is presented. The proposed transition connects CPW with CPS by the reformed air-bridge. Two ground planes of CPW are tied at their ends by a line and the centre of the line is connected to the ground strip of CPS by another line. Owing to the symmetry of the proposed structure, the currents of two ground planes of CPW are combined with the same phase and transferred to the ground strip of CPS. With height of 3 μm, the signal line of CPW passes over two connecting lines and is connected to the signal strip of CPS. For the back-to-back transition structure, insertion loss <1 dB and return loss >15 dB are obtained from 0.5 to 110 GHz