Isotactic and syndiotactic polypropylene/multi-wall carbon nanotube composites: synthesis and properties

Isotactic polypropylene (iPP) and syndiotactic polypropylene (sPP) nanocomposites containing 0.1–3.5 wt.% multi-wall carbon nanotubes (MWCNTs) have been synthesized via in situ polymerization method with the use of C₂- and C_s- symmetry zirconocenes activated by methylaluminoxane (MAO) in liquid propylene medium. Fracture morphology studies by SEM reveal different MWCNT dispersion efficiency in various polymer matrices, which arises from the catalytic peculiarities of the composite synthesis. Considerable Young’s modulus enhancement of iPP and sPP (25–66%) takes place even at low MWCNT loadings (below 0.5 wt.%). The obtained nanocomposites can find use as efficient electromagnetic shielding materials and microwave absorbing filters due to relatively low permittivity values and considerable dielectric losses in microwave range. Calorimetry data demonstrate that MWCNTs exert evident influence as nucleating agents causing the rise of iPP and sPP crystallization temperature. Considerable retardation effect on iPP thermal oxidative degradation has been observed: the temperature of maximal weight loss rate rises by ~52 °C upon incorporating only 1.4 wt.% MWCNTs.     

Polymer Fiber Probes Enable Optical Control of Spinal Cord and Muscle Function In Vivo

Restoration of motor and sensory functions in paralyzed patients requires the development of tools for simultaneous recording and stimulation of neural activity in the spinal cord. In addition to its complex neurophysiology, the spinal cord presents technical challenges stemming from its flexible fibrous structure and repeated elastic deformation during normal motion. To address these engineering constraints, we developed highly flexible fiber probes, consisting entirely of polymers, for combined optical stimulation and recording of neural activity. The fabricated fiber probes exhibit low‐loss light transmission even under repeated extreme bending deformations. Using our fiber probes, we demonstrate simultaneous recording and optogenetic stimulation of neural activity in the spinal cord of transgenic mice expressing the light sensitive protein channelrhodopsin 2 (ChR2). Furthermore, optical stimulation of the spinal cord with the polymer fiber probes induces on‐demand limb movements that correlate with electromyographical (EMG) activity.     

Customizing MRI-Compatible Multifunctional Neural Interfaces through Fiber Drawing

Fiber drawing enables scalable fabrication of multifunctional flexible fibers that integrate electrical, optical, and microfluidic modalities to record and modulate neural activity. Constraints on thermomechanical properties of materials, however, have prevented integrated drawing of metal electrodes with low-loss polymer waveguides for concurrent electrical recording and optical neuromodulation. Here, two fabrication approaches are introduced: 1) an iterative thermal drawing with a soft, low melting temperature (T_m) metal indium, and 2) a metal convergence drawing with traditionally non-drawable high T_m metal tungsten. Both approaches deliver multifunctional flexible neural interfaces with low-impedance metallic electrodes and low-loss waveguides, capable of recording optically-evoked and spontaneous neural activity in mice over several weeks. These fibers are coupled with a light-weight mechanical microdrive (1 g) that enables depth-specific interrogation of neural circuits in mice following chronic implantation. Finally, the compatibility of these fibers with magnetic resonance imaging is demonstrated and they are applied to visualize the delivery of chemical payloads through the integrated channels in real time. Together, these advances expand the domains of application of the fiber-based neural probes in neuroscience and neuroengineering.     

Structure and conductivity of yttria and scandia‐doped zirconia crystals grown by skull melting

In this paper a detailed study of the (ZrO₂)_1‐x(Y₂O₃)_x (x=0.025–0.15), (ZrO₂)_1‐x(Sc₂O₃)_x (x = 0.06 – 0.11) and (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y (x=0.07 – 0.11; y=0.01 – 0.04) solid solution crystals grown by skull melting technique is presented. The structure, phase composition, and ion conductivity of the obtained crystals were investigated by X‐ray diffraction, transmission electron microscopy, Raman scattering spectroscopy, and impedance spectroscopy. Maximum conductivity as (ZrO₂)_1‐x(Y₂O₃)_x and (ZrO₂)_1‐x(Sc₂O₃)_x solid solution crystals is observed for the compositions containing 10 mol% stabilizing oxide, and the conductivity of 10ScSZ is ~3 times higher than for 10YSZ. Experiments on crystal growth (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solutions showed that uniform, transparent crystals 7Sc3YSZ, 7Sc4YSZ, 8Sc2YSZ, 8Sc3YSZ, 9Sc2YSZ, 9Sc3YSZ, 10Sc1YSZ, and 10Sc2YSZ are single phase crystal containing t″ phase. It is established that a necessary condition of melt growth of (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y single‐phase crystals is the total concentration of the stabilizing oxides from 10 to 12 mol%. The addition of Y₂O₃ affects the (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solution conductivity different ways and depends on the Sc₂O₃ content in the starting composition. The effects of structure, phase composition, concentration, and type of stabilizing oxides on the electrical characteristics of obtained crystals are discussed.     

Nanomaterials for Heterogeneous Combustion

Nanophase materials and nanocomposites, characterized by an ultra fine grain size (less than 100 nm) have attracted wide spread interest in recent years by virtue of their unusual mechanical, electrical, optical, magnetic, and energetic properties. Studies have shown that the thermal behavior of nano‐scaled materials is quite different from micron‐sized powders. Nanosized metallic and explosive powders have been used as solid propellant and explosive mixtures to increase efficiency. At the same time recent studies reveal that the presence of nanosized metals in propellants does not necessary translate into an increased burning rate and burning temperature. The reasons of this effect are far from being clear. This paper presents a new approach to the production of nanocomposites of some energetic materials – ammonium nitrite, cyclotrimethylene trinitramine (RDX), and aluminum – by the vacuum co‐deposition technique. The thermal behavior of the synthesized nanopowder and nanocomposites is investigated. A substantial difference in burning rate of RDX nanopowder has been found in comparison to micron‐sized material. Experimental results allow investigating the effects of nanosized materials on the combustion characteristics.     

Esterase Activity of Serum Albumin Studied by 1H NMR Spectroscopy and Molecular Modelling

Serum albumin possesses esterase and pseudo-esterase activities towards a number of endogenous and exogenous substrates, but the mechanism of interaction of various esters and other compounds with albumin is still unclear. In the present study, proton nuclear magnetic resonance (¹H NMR) has been applied to the study of true esterase activity of albumin, using the example of bovine serum albumin (BSA) and p-nitrophenyl acetate (NPA). The site of BSA esterase activity was then determined using molecular modelling methods. According to the data obtained, the accumulation of acetate in the presence of BSA in the reaction mixture is much more intense as compared with the spontaneous hydrolysis of NPA, which indicates true esterase activity of albumin towards NPA. Similar results were obtained for p-nitophenyl propionate (NPP) as substrate. The rate of acetate and propionate release confirms the assumption that there is a site of true esterase activity in the albumin molecule, which is different from the site of the pseudo-esterase activity Sudlow II. The results of molecular modelling of BSA and NPA interaction make it possible to postulate that Sudlow site I is the site of true esterase activity of albumin.     

Temperature profile effects in accelerated thermal cycling of SnPb and Pb-free solder joints

Accelerated thermal cycling (ATC) has been widely used in the microelectronics industry for reliability assessment. ATC testing decreases life cycle test time by one or more of the following means: increasing the heating and cooling rate, decreasing the hold time, or increasing the range of the applied temperature. The relative effect of each of these cycle parameters and the failure mechanisms they induce has been the subject of many studies; however uncertainty remains, particularly regarding the role of the heating and cooling rate. In this research, three conditions with two ramp rates (14 °C/min and 95 °C/min) and two temperature ranges (ΔT = 0–100 °C and −40 to 125 °C) were applied to resistor 2512 and PBGA 256 test vehicles assembled with SnPb and Pb-free solders. The test results showed that the higher ramp rate reduced the testing time while retaining the same failure modes, and that the damage per cycle increased with the temperature difference. For the resistors, the Pb-free solder joints lasted longer than the SnPb joints at the smaller ΔT, but were inferior at the larger ΔT. In contrast, the Pb-free solder joints in the PBGA test vehicles lasted longer than the SnPb solder under both conditions.     

Candidate Genes and Proteomic Biomarkers of Serum and Urine in Medication-Overuse Headache

Chronic headache is a topical problem of neurology, psychiatry and general practice. The medication-overuse headache (MOH) is one of the leading pathologies in the structure of chronic headache. However, early diagnosis of the MOH is challenging. We analyzed potential proteomic biomarkers of serum and urine in patients with MOH. Methods: We searched PubMed, Springer, Scopus, Web of Science, ClinicalKey, and Google Scholar databases for English publications over the past 10 years using keywords and their combinations. Results: We found and analyzed seven studies that met the search criteria for the purpose of the review, including 24 serum proteomic biomarkers and 25 urine proteomic biomarkers of MOH. Moreover, the candidate genes and locus of the studied serum (vitamin D-binding protein, lipocalin-type prostaglandin D2 synthase, apolipoprotein E, etc.) and urine proteomic biomarkers (uromodulin, alpha-1-microglobulin, zinc-alpha-2-glycoprotein, etc.) of MOH are presented in this review. Conclusions: The serum and urine proteomic biomarkers of MOH can potentially help with the identification of patients with MOH development. Due to the relevance of the problem, the authors believe that further investigation of the MOH proteomic biomarkers in different ethnic and racial groups of patients with primary headache is necessary. In addition, it is important to investigate whether medications of different drug classes influence the levels of serum and urine proteomic biomarkers.