Microencapsulation of reactive amine by interfacially engineered epoxy microcapsules for smart applications

The most common approach for incorporation of extrinsic self-healing functionality relies on introducing healant-loaded micro-containers in the polymeric formulation. In this context, a healing system based on encapsulated epoxy resin and amine hardener appears to be one of the most economically viable solutions, in view of the chemical as well as mechanical compatibility with the matrix. Encapsulation of epoxy resins has been extensively studied while the high reactivity of the amine hardener renders its encapsulation rather difficult and has been attempted with only modest success. The purpose of the present work is to adopt an interfacial polymerization approach for the preparation of epoxy microcapsules encapsulating a reactive amine hardener (triethylene tetramine). The effects of experimental parameters, including reaction temperature, stirring speed and epoxy/amine concentration ratio on the microcapsule formation were investigated. A polymeric surfactant was used to stabilize the suspension to modulate the particle size distribution of the resultant microcapsules. The highest encapsulation efficiencies were obtained when the reaction medium was maintained at 70 °C under stirring (600 rpm) at epoxy/amine ratio of 10/3.2. The microcapsule dimensions and core content could be tailored, following this encapsulation approach of interfacial polymerisation. Under optimal conditions, spherical microcapsules with 100% yield and 12% core content were obtained.     

Atmospheric and children's blood lead as indicators of vehicular traffic and other emission sources in Mumbai, India

Average concentration of Pb in atmospheric air particulates in different suburbs of Mumbai was studied for almost a decade and its spatial and temporal profiles are discussed in relation to emission sources. In general the concentration of Pb in all the residential suburban atmosphere is well below the Central Pollution Control Board (CPCB, 1994) prescribed limit of 1.5 microg m(-3) barring a few exceptions for some residential/industrial sites, such as those of Thane and Kurla scrap yards. The correlation between blood lead of children and air lead reveals that the blood Pb level in children could increase by 3.6 microg dl(-1) for an incremental rise of 1.0 microg Pb m(-3) of air. The temporal profile of air Pb values indicates a decreasing trend in residential suburbs (Khar: 1984, 0.39 microg m(-3); 1996, 0.17 microg m(-3)) as well as in suburban residential areas with low traffic (Goregaon: 1984, 0.53 microg m(-3); 1996, 0.30 microg m(-3)).     

Heavy metals in maternal and cord blood

Heavy metal concentrations have been determined in maternal and cord blood samples collected from mothers in the age group 20-25 years with full-term neonates (37-40 weeks). The concentrations of Pb, Cd, Cu and Zn were found to be low in cord blood as compared to mother's blood and the ratio between cord blood and maternal blood for the respective elements was found to be approximately 0.80, 0.86, 0.47 and 0.40. On the other hand, the concentrations of Fe and Mg in the mother's blood were found to be lower than those in the cord blood. Prenatal exposure to lead in Mumbai, though low (5.1 microg/dl), is approximately 2-3 times higher than that observed in Canada or Italy. A strong correlation (r = 0.79) between the maternal and cord blood lead levels has been observed during the present study.     

Thickness dependent structural, electronic, and optical properties of Ge nanostructures

In the present paper, we have investigated structural, optical as well as electronic properties of electron beam evaporated Ge thin films having layer thicknesses ranging from ultra-thin (5 nm) to thick (200 nm). The Raman spectra show that all peaks are shifted towards lower wave number as compared to their bulk counterparts and are considered as a signature of nanostructure formation and quantum confinement effect. The Raman line exhibits transformation from nanocrystalline to microcrystalline phase with a reduction in blue shift of peak position with increase in Ge film thickness (>5 nm). Similarly, the optical absorption spectra corresponding to these films also show reduction in blue shift effect, although Ge 5 nm film shows the absorption behaviour quite different from higher thickness films. The corresponding band gap values obtained from absorption measurements are much larger than bulk Ge and are mainly attributed to the effect of quantum confinement as expected for small size particles calculated from GIXRD patterns. AFM data in each case are correlated and discussed with structural as well as optical results to support the effect of growth morphology on the above-mentioned observations. The results are further supported by photoelectron spectroscopy (PES), photoluminescence (PL) and resistivity measurements and are interpreted in terms of crystallinity and quantum confinement effect.     

Nanobiosensor design utilizing a periplasmic E. coli receptor protein immobilized within Au/polycarbonate nanopores

A new type of nanopore sensor design is reported for a reagent-less electrochemical biosensor with no analyte "tagging" by fluorescent molecules, nanoparticles, or other species. This sensor design involves immobilization within Au-coated nanopores of bacterial periplasmic binding proteins (bPBP), which undergo a wide-amplitude, hinge-twist motion upon ligand binding. Ligand binding thus triggers a reduction in the effective thickness of the immobilized protein film, which is detected as an increase in electrolyte conductivity (decrease in impedance) through the nanopores. This new sensor design is demonstrated for glucose detection using a cysteine-tagged mutant (GGR Q26C) of the galactose/glucose receptor (GGR) protein from the bPBP family. The GGR Q26C protein is immobilized onto Au nanoislands that are deposited within the pores of commercially available nanoporous polycarbonate membranes.     

Magnetic force microscopy of nano-size magnetic domain ordering in heavy ion irradiated fullerene films

In the present work, magnetic force microscopy is employed to investigate the magnetic ordering in ion irradiated fullerene films. It is observed that magnetic domain size is approximately 100-200 nm and magnetic signal is stronger at the domain boundaries. Magnetic signal arise in irradiated films is confirmed by magnetic measurements using a superconducting quantum interference device which increases with the ion fluence. The induced magnetism is possibly due to structural defects in the amorphous carbon phase formed by ion irradiation.     

Stimulated coherent Smith-Purcell radiation from a metallic grating

A relativistic electron beam with velocity ν_bz passing over a metallic grating, with deep periodic depressions of wavenumber k₀z, excites a slow wave (ω, k_z) via Cerenkov interaction, ω=(k_z+k₀)ν_b. The beam bunches induce currents in the fins of the grating that act as a phased radiating dipole array, thereby generating coherent radiation at a wavelength λ=(2π/k₀l)(c/ν_b-sin&thetas;) where l is an integer and &thetas; is the angle of emission measured from the normal of the grating. The current threshold for the instability and radiation power scaling with beam current are discussed     

3D MHD cross flow over an exponential stretching porous surface

The present study aims to investigate the effects of thermal‐diffusion and diffusion‐thermo onan magnetohydrodynamic convective flow of viscous fluids over an exponentially stretching sheet. Thermal radiation effects are also considered in the study. This analysis is carried out in three dimensions and a similarity transformation is adopted to get a set of ordinary differential equations from a set of partial differential equations. And the Fourth‐order Runge‐Kutta method and shooting technique along with the secant method are employed to find out an iterative solution. We also analyze here the influence of the variable magnetic field, nonuniform permeability and variable chemical reaction on the fluid flow. The impact of various pertinent parameters of interest has extensively been explored through graphs and tables. The major findings of the present study are that resistive Lorentz force diminishes the fluid velocity and uplifts the thermal as well as concentration fields. Inclusion of porous matrix improves the viscous drag force which in turn augments wall shear stresses and peters out the heat and mass transfer rates from the sheet. In addition, the thermal expansion coefficient has an inverse relation with temperature.     

Role of various moving walls on entropy generation during mixed convection within entrapped porous triangular cavities

The aim of the present investigation is to analyze the effect of the motion of horizontal walls on the entropy generation and heat transfer rates in an entrapped triangular porous cavity during mixed convection. Two different thermal boundary conditions are considered as follows: (i) hot inclined walls and cold horizontal walls and (ii) cold inclined walls and hot horizontal walls. Overall, Re?=?100 may be recommended at Pr_m?=?0.026, 7.2, Gr?=?10⁵, and Da_m?=?10^?4 to 10^?2 within the upper and lower cavities for cases 1 and 2.     

Temperature-dependent barrier height in CdSe Schottky diode

This article reports the measurements of temperature-dependent barrier height (BH) of CdSe Schottky diodes. These diodes have been made by thermal evaporation technique on ITO glass and glass substrates at room temperature. The XRD measurements have been made and the average particle size has been calculated which comes out to be ~20 nm. The Au dots have been made for non-ohmic contacts. I–V characteristics have been measured at different temperatures (280–330 K). These characteristics obey the thermionic emission theory. The BH decreases and ideality factor increases with the increase in temperature. Richardson’s plot has been made and Richardson’s constant has been calculated which is less than the expected value. Capacitance measurements have been done at different frequencies and the interface states have been calculated. The results have been explained on the basis of BH inhomogeneities.