Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

Effect of graft chain length of the stabilizer on dispersion polymerization of methyl methacrylate in petrol

To carry out dispersion polymerization of methyl methacrylate (MMA) in petrol, we have used a poly(MMA) grafted-poly(12-hydroxystearic acid) copolymer as the stabilizer. This special copolymer was prepared as a solution in a mixture of ethyl acetate and butyl acetate solvents. We investigated the effect of graft chain length of the stabilizer on the dispersion polymerization in petrol. We synthesized the stabilizer copolymer with n = 1–4 and determined the rate and the molecular weight of the PMMA formed. There is no dispersion polymerization for n = 1. However, for any other n, for a given stabilizer concentration, as the chain length of the graft is increased, the molecular weight as well as the rate of PMMA formation increases. As opposed to this for a given graft length as the concentration of the stabilizer increases, the molecular weight of PMMA first rises, but for a larger concentration, it begins to fall after undergoing a maximum. In this work, we modeled the heterogeneity of the reaction mass and proposed a mathematical model for dispersion polymerization of MMA in petrol. The computer results are found to conform to the experimentally observed molecular weight of the PMMA. © 1993 John Wiley & Sons, Inc.     

Conductivity and viscosity studies of ethylene carbonate based solutions containing lithium perchlorate

Specific conductivities and viscosities of lithium perchlorate at four different concentrations (0.5, 1.0, 1.5 and 2.0 M) in ethylene carbonate (EC) based binary mixed solvent systems at 25°C are reported. The co-solvents chosen were tetrahydrofuran (THF), 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL). Viscosity variations in all the three mixed solvent systems without electrolyte showed negative deviation from ideal behaviour thereby indicating the occurrence of a structure breaking effect in these three different binary systems. The increase in viscosity with increase in concentration of LiClO₄ is attributed to the structural enhancement through the formation of a solvated complex which occupies interstitials in the solvent mixtures. 1 M LiClO₄ solution shows maximum specific conductivity at 30 vol % EC for EC + DME and EC + DOL mixtures and at 50 vol % EC for EC + THF mixtures. Conductivity variations are explained on the basis of preferential solvation of lithium perchlorate by co-solvents (THF, DME and DOL) in their respective mixtures with ethylene carbonate.     

Liver disorder detection using variable- neighbor weighted fuzzy K nearest neighbor approach

The human liver disorder is a genetic problem due to the habituality of alcohol or effect by the virus. It can lead to liver failure or liver cancer, if not been detected in initial stage. The aim of the proposed method is to detect the liver disorder in initial stage using liver function test dataset. The problem with many real-world datasets including liver disease diagnosis data is class imbalanced. The word imbalance refers to the conditions that the number of observations belongs to one class having more or less than the other class(es). Traditional K- Nearest Neighbor (KNN) or Fuzzy KNN classifier does not work well on the imbalanced dataset because they treat the neighbor equally. The weighted variant of Fuzzy KNN assign a large weight for the neighbor belongs to the minority class data and relatively small weight for the neighbor belongs to the majority class to resolve the issues with data imbalance. In this paper, Variable- Neighbor Weighted Fuzzy K Nearest Neighbor Approach (Variable-NWFKNN) is proposed, which is an improved variant of Fuzzy-NWKNN. The proposed Variable-NWFKNN method is implemented on three real-world imbalance liver function test datasets BUPA, ILPD from UCI and MPRLPD. The Variable-NWFKNN is compared with existing NWKNN and Fuzzy-NWKKNN methods and found accuracy 73.91% (BUPA Dataset), 77.59% (ILPD Dataset) and 87.01% (MPRLPD Dataset). Further, TL_RUS method is used for preprocessing and it improved the accuracy as 78.46% (BUPA Dataset), 78.46% (ILPD Dataset) and 95.79% (MPRLPD Dataset).

     

高速公路施工区车辆强制换道耗时生存模型

为研究高速公路施工区车辆强制换道行为及其影响因素,采用生存分析中的半参数分析方法建立强制换道耗时的乘法风险率模型.通过无人机拍摄采集高速公路施工区的车辆换道耗时及其影响因素数据,最终确立换道耗时Cox比例风险模型,对换道耗时数据进行Cox回归建模分析.结果表明:近77%的换道车辆在10 s内完成换道;小型车和中型车经养护施工区的换道耗时未发现显著性差别;对于相同的换道耗时,平峰期的累积生存率明显低于高峰期和过渡时期,而高峰期的累积生存率最高.建立的强制换道耗时生存模型可有效的定量分析车型和交通时段对高速公路施工区车辆换道行为的影响,可为高速公路施工区交通管理控制及车辆换道行为建模及仿真奠定一定的理论基础.     

The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys

The effect of quaternary additions of 0.5% Y and 0.5 and 1.0% Th to a base alloy of Ni-10Cr-5Al on the oxidation behavior and mechanism was studied during oxidation in air over the range of 1000–1200°C. The presence of yttrium decreased the oxidation kinetics slightly, whereas the addition of thorium caused a slight increase. Oxide scale adherence was markedly improved by the addition of the quaternary elements. Although a number of oxides formed on yttrium-containing alloys, quantitative x-ray diffraction clearly showed that the rate-controlling step was the diffusion of oxygen through short-circuit paths in a thin layer of alumina that formed parabolically with time. Mixed oxides containing both aluminum and yttrium formed by the reaction of Y₂O₃ to form YAlOP₃ initially, and Y₃Al₅O₁₂ (YAG) after longer times. Although the scale adherence of the yttrium-containing alloy was considerably better than the base alloys, spalling did occur that was attributed to the formation of the voluminous YAG particles that grew in a mushroom-like manner, lifting the protective scale off the substrate locally. The YAG particles formed primarily at grain boundaries in the substrate in which the yttrium originally existed as YNi₉. This intermetallic compound reacted to form Y₂O₃, liberating metallic nickel that subsequently reacted to form NiO or NiAl₂O₄ spinel or both. The Y₂O₃ reacted with aluminum to ultimately form the YAG mushrooms. Thorium did not form any mixed oxides; the only oxide involving thorium was ThO₂, which existed as small particles at the oxide-metal interface. A highly beneficial effect of the thoria particles in reducing film spalling was observed. Scale spalling in the base alloy was attributed to void formation at the oxide-metal interface, the voids forming by condensation of excess vacancies from the Kirkendall effect associated with fast back-diffusion, of nickel into the substrate as aluminum was preferentially oxidized and diffused slowly outward. The mechanism of improved scale adherence in the quaternary alloys was the elimination of voids by annihilation of the Kirkendall vacancies at vacancy sinks introduced by the noncoherent interfaces between yttrium and thorium-containing intermetallics or oxides or both.This work is based on a portion of the dissertation of Arun Kumar in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering, University of California, Los Angeles.Supported by NASA-Ames under grant No. NGR 05-007-352.     

The effects of silicon on the properties of tantalum

The microalloying of tantalum with silicon has been effectively used on a commercial scale. However, data on effects of microalloying on processibility, microstructure and mechanical properties are not readily available. To develop some data, tantalum powder with various levels of silicon (0–50 ppm) was processed under identical conditions. Sheet samples were then annealed at different temperatures and evaluated via microstructural, chemical and mechanical tests. The recrystallization temperature was found to increase with silicon content, most probably as a result of the presence of an intermetallic (Ta₃Si) phase. The mechanical properties of unrecrystallized tantalum are, as expected, significantly different from those of recrystallized tantalum.     

Generalized differentiability and integrability for fuzzy set-valued functions on time scales

This paper deals with the fuzzy set-valued functions of real variables on time scale whose values are normal, convex, upper semicontinuous and compactly supported fuzzy sets in \(\mathbb {R}^{n}\). We introduce and study the fundamental properties of new class of derivative called generalized delta derivative (\(\Delta _{g}\)-derivative) and generalized delta integral (\(\Delta _{g}\)-integral) for such fuzzy functions.