ACS-Fed e-Shaped Dual Band Uniplanar Printed Antenna for Modern Wireless Communication Applications

A printed small size (12×16.5 mm) ACS-fed e-shaped uniplanar antenna is proposed for dual band applications. The multiband operating characteristics have been achieved by integrating e-shaped radiating strips to the 50ΩACSfeed line. Two simultaneously operating wide bands have been generated by using optimized radiating branch strips for the multiband applications. For obtaining size reduction and wider impedance bandwidth, e-shaped meandered elements are chosen in the design. The proposed design features the bandwidth (VSWR < 2, reflection coefficient below–10 dB) of 100 MHz in 2.4–2.5 GHz, and 2100MHzin 4.0–6.1 GHz. The developed multiband antenna can be useful for several wireless communication applications, such as 2.4 GHz Bluetooth/RFID,WLAN(2.4/5.2/5.8 GHz), WiMAX (5.5 GHz), US public safety band (4.9 GHz), ISM band, radio frequency energy harvesting and internet of things (IoT) applications.     

Mechanism and kinetics of curing of diglycidyl ether of bisphenol a (DGEBA) resin by chitosan

Crosslinking behavior of Diglycidyl Ether of Bisphenol A (DGEBA) resins cured by chitosan was isothermally studied by Fourier Transform Infrared (FTIR) Spectroscopy for various molar ratios of chitosan at different temperatures. Results indicated that oxirane undergoes nucleophilic attack by the primary amine groups in chitosan to form crosslinked structure. Epoxy fractional conversion (α ) was calculated by following the change in area of oxirane peak at 914 cm^?1. Value of α and reaction rate (dα /dt ) increased with increase in curing temperature and chitosan concentration. The maximum epoxy fractional conversion of 70% was obtained for 1:4 molar ratio (Epoxy:Chitosan) at 200°C. A four parameter kinetic model with two rate constants was employed to simulate the experimental data. Overall reaction order and activation energy for all compositions were in the range of 2.5–3 and 25–50 kJ mol^?1, respectively. Results indicated that cure reaction is autocatalytic and does not follow simple n th order cure kinetics. Thermogravimetric analysis (TGA) performed on chitosan cured DGEBA films and compared against neat epoxy and neat chitosan films. Results showed that the degradation of chitosan crosslinked epoxy network occurred in the temperature range of 450–550°C. POLYM. ENG. SCI., 57:865–874, 2017. © 2016 Society of Plastics Engineers     

Gas-induced transformation and expansion of a non-porous organic solid

Organic solids composed by weak van der Waals forces are attracting considerable attention owing to their potential applications in gas storage, separation and sensor applications. Herein we report a gas-induced transformation that remarkably converts the high-density guest-free form of a well-known organic host (p-tert-butylcalix[4]arene) to a low-density form and vice versa, a process that would be expected to involve surmounting a considerable energy barrier. This transformation occurs despite the fact that the high-density form is devoid of channels or pores. Gas molecules seem to diffuse through the non-porous solid into small lattice voids, and initiate the transition to the low-density kinetic form with approximately 10% expansion of the crystalline organic lattice, which corresponds to absorption of CO2 and N2O (refs 4,5). This suggests the possibility of a more general phenomenon that can be exploited to find more porous materials from non-porous organic and metal-organic frameworks that possess void space large enough to accommodate the gas molecules.     

The effective velocity model: An improved approach to velocity sampling in actuator line models

Actuator line modeling of wind turbines requires the definition of a free-stream velocity in a computational mesh and a regularization kernel to project the computed body forces onto the domain. Both choices strongly influence the results. In this work, a novel velocity sampling method—the so-called effective velocity model (EVM)—is implemented in the CFD software SOWFA, validated, and compared to pre-existing approaches. Results show superior method robustness with respect to the regularization kernel width ( $ϵ$) choice while preserving acceptable accuracy. In particular, the power predicted by the EVM is nearly independent of the $ϵ$ value.     

Novel statistical method for data drift detection in satellite telemetry

Autonomy is becoming a prime requirement for satellite mission control operations. Data-driven methods like Machine Learning models are playing a key role in bringing in autonomy. Health keeping data from satellite telemetry is a key ingredient in these data-driven methods. In real-world satellite operations, the health-keeping telemetry data gradually drifts due to adverse space weather effects and wear and tear of electronic and mechanical components. The key question that arises is how to detect and quantify the data drift which is generally a gradual phenomenon. This paper discusses a novel statistical method for detecting data drift occurring in satellite telemetry. For the purpose of experimental work in this paper, an actual telemetry data set of the BUS CURRENT sensor which is part of the Electrical Power System of a Low Earth Orbit Satellite was considered. Data drift detection test was carried out using this sensor data using the developed novel statistical method and with Kolmogorov Smirnov test which is a probabilistic method. Both results are analysed and compared. Thereafter novel statical method was used to check its efficacy using a synthetic data set with induced drift.     

Vitamin D Reverses Disruption of Gut Epithelial Barrier Function Caused by Campylobacter jejuni

Infections by the zoonotic foodborne bacterium Campylobacter jejuni (C. jejuni) are among the most frequent causes of bacterial gastroenteritis worldwide. The aim was to evaluate the relationship between epithelial barrier disruption, mucosal immune activation, and vitamin D (VD) treatment during C. jejuni infection, using intestinal epithelial cells and mouse models focused on the interaction of C. jejuni with the VD signaling pathway and VD treatment to improve C. jejuni-induced barrier dysfunction. Our RNA-Seq data from campylobacteriosis patients demonstrate inhibition of VD receptor (VDR) downstream targets, consistent with suppression of immune function. Barrier-preserving effects of VD addition were identified in C. jejuni-infected epithelial cells and IL-10^−/− mice. Furthermore, interference of C. jejuni with the VDR pathway was shown via VDR/retinoid X receptor (RXR) interaction. Paracellular leakiness of infected epithelia correlated with tight junction (TJ) protein redistribution off the TJ domain and apoptosis induction. Supplementation with VD reversed barrier impairment and prevented inhibition of the VDR pathway, as shown by restoration of transepithelial electrical resistance and fluorescein (332 Da) permeability. We conclude that VD treatment restores gut epithelial barrier functionality and decreases bacterial transmigration and might, therefore, be a promising compound for C. jejuni treatment in humans and animals.     

Synthesis, structure, and in vitro antitumor activity of some glycoside derivatives of ferrocenyl-chalcones and ferrocenyl-pyrazolines

Some new glycosides of 3-ferrocenyl-1-(4'-hydroxyphenyl)-prop-2-en-1-one were prepared and transformed into the corresponding pyrazoline and pyrazole derivatives. Using methyl-hydrazine, formation of regioisomers was observed. DDQ was found to be a mild and efficient reagent for the pyrazoline-pyrazole dehydroaromatization process. The structure of the new compounds was proved by IR and NMR spectroscopy. The in vitro antitumor activity of the substances was investigated against human leukemia (HL-60) cells by the MTT method. Among these new compounds some chalcone derivatives (3 a, 3 b, 5 a, and 5 b) showed attractive in vitro antitumor effects on human leukemia cells. These molecules contained ferrocenyl moieties and a p-hydroxy-phenolic ring or a size-independent apolar substitution of that.     

Tracking mesenchymal stem cells with iron oxide nanoparticle loaded poly(lactide-co-glycolide) microparticles

Monitoring the location, distribution and long-term engraftment of administered cells is critical for demonstrating the success of a cell therapy. Among available imaging-based cell tracking tools, magnetic resonance imaging (MRI) is advantageous due to its noninvasiveness, deep penetration, and high spatial resolution. While tracking cells in preclinical models via internalized MRI contrast agents (iron oxide nanoparticles, IO-NPs) is a widely used method, IO-NPs suffer from low iron content per particle, low uptake in nonphagocytotic cell types (e.g., mesenchymal stem cells, MSCs), weak negative contrast, and decreased MRI signal due to cell proliferation and cellular exocytosis. Herein, we demonstrate that internalization of IO-NP (10 nm) loaded biodegradable poly(lactide-co-glycolide) microparticles (IO/PLGA-MPs, 0.4-3 μm) in MSCs enhances MR parameters such as the r(2) relaxivity (5-fold), residence time inside the cells (3-fold) and R(2) signal (2-fold) compared to IO-NPs alone. Intriguingly, in vitro and in vivo experiments demonstrate that internalization of IO/PLGA-MPs in MSCs does not compromise inherent cell properties such as viability, proliferation, migration and their ability to home to sites of inflammation.     

MoO(3-x) nanowire arrays as stable and high-capacity anodes for lithium ion batteries

In this study, vertical nanowire arrays of MoO(3-x) grown on metallic substrates with diameters of ~90 nm show high-capacity retention of ~630 mAhg(-1) for up to 20 cycles at 50 mAg(-1) current density. Particularly, they exhibit a capacity retention of ~500 mAhg(-1) in the voltage window of 0.7-0.1 V, much higher than the theoretical capacity of graphite. In addition, 10 nm Si-coated MoO(3-x) nanowire arrays have shown a capacity retention of ~780 mAhg(-1), indicating that hybrid materials are the next generation materials for lithium ion batteries.