On the Joint Synchronization of Clock Offset and Skew in RBS-Protocol

Motivated by the necessity of having a good clock synchronization amongst the nodes of wireless ad-hoc sensor networks, the joint maximum likelihood (JML) estimator for clock phase offset and skew under exponential noise model for reference broadcast synchronization (RBS) protocol is formulated and found via a direct algorithm. The Gibbs sampler is also proposed for joint clock phase offset and skew estimation and shown to provide superior performance relative to JML- estimator. Lower and upper bounds for the mean-square errors (MSE) of JML-estimator and Gibbs Sampler are introduced in terms of the MSE of the uniform minimum variance unbiased (UMVU) estimator and the conventional best linear unbiased estimator (BLUE), respectively.     

Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation

Polymeric mucoadhesive pellets of nifedipine were designed using computer software and they were prepared by extrusion-spheronization using HPMC K15M and κ-carrageenan with microcrystalline cellulose. A randomized rotatable two factor central composite design was applied for assessment of influence of two independent variables such as concentration of κ-carrageenan and HPMC K15M on dependent variables. Pellets were characterized by FTIR, DSC, SEM, flow properties, particle size, abrasion resistance, sphericity, drug content, percent production yield, in vitro drug release, ex vivo mucoadhesion, stability studies and similarity factor. The optimized formulation was selected based on criteria of sphericity nearest to 1.0 with maximum cumulative drug release percentage. Formulation NF6 exhibited sufficient porous spheres, free flowing and smooth surface mucoadhesion of 91.34 % and drug content 98.22 ± 0.37 %. Kinetic modeling revealed that the formulation followed the Higuchi model and showed the Quassi-Fickian drug release mechanism. The similarity factor, F2 value, was found to be 74 ± 6 and there was no significant change in drug content and ex vivo mucoadhesion after 90 days at 40 ± 2 °C, and 75 ± 5 % RH clearly indicated the optimized batch NF6 was stable. Thus, it can be concluded that use of κ-carrageenan, microcrystalline cellulose and HPMC K15M at the 20:35:10 w/w ratio could provide an effective carrier for enhancement of sphericity and sustained release of matrix pellets.     

Heterogenized copper catalysts for the amination of arylhalide: Synthesis,characterization and catalytic applications

This research investigated the synthesis, characterization and catalytic activity of heterogenized copper complexes for the selective amination of aryl halides. Amination reactions using homogeneous copper catalyst systems are not generally selective and it is also difficult to recover the catalyst from the homogeneous system for recycling. To overcome these difficulties, our efforts were directed towards the development of cheaper heterogeneous catalyst systems, which can be easily recovered and recycled. Heterogenized analogs of the homogenous Cu complexes were prepared using two methods: (a) encapsulation of copper complexes in zeolite-Y and (b) tethering of copper complexes on various supports like zeolite-Y, silica, charcoal, or clay. The encapsulated and tethered copper catalysts on zeolite-Y were characterized using EPR, Diffused reflectance UV–vis, XRD, IAS, ICPES, SEM, and TEM. The results confirmed that the copper complexes were truly heterogenized in zeolite-Y support. Encapsulated and tethered copper complexes were tested for amination of aryl iodide. The effects of various reaction parameters were examined using tethered Cu(Phen)(PPh₃)Br-PTA-Y catalyst to determine optimum conditions. A recycle study of encapsulated and tethered Cu catalyst was carried out to test their robustness for possible commercial exploitation.     

Multilayered large‐area WO3 films on sheet and mesh‐type stainless steel substrates for photoelectrochemical hydrogen generation

The objective of this study is to demonstrate the significant improvement in the photoelectrochemical (PEC) hydrogen generation by a photoanode owing to the increased surface area of the substrate. In this work, multilayered tungsten oxide (WO₃) films have been successfully synthesized onto the large‐area sheet (9 × 9cm²) and mesh (1 × 20cm²) ‐type stainless steel (SS) substrates using screen printing and brush painting methods, respectively. All the WO₃ films are porous and nanocrystalline (30–80 nm) in nature with a monoclinic crystal structure as revealed from X‐ray diffraction and scanning electron microscopy studies. The PEC water splitting study is performed under simulated 1 SUN illumination (AM1.5 G) in a typical two‐electrode cell configuration with WO₃ photoanode and Pt wire immersed in 0.5 M H₂SO₄ electrolyte. The photocurrent as well as hydrogen generation rate for WO₃ photoanodes coated on the plane SS sheet substrate is relatively low and showed minimal change with increasing film thickness. On the other hand, the photocurrent as well as the hydrogen generation is enhanced by a 3–4 fold degree for the WO₃ photoanodes coated on SS mesh. We attribute such efficient water splitting to the increment in the filling factor of the WO₃ material due to the large effective surface area of the SS mesh as compared to the SS sheet substrate. Copyright © 2011 John Wiley & Sons, Ltd.     

Optimisation of opportunistic maintenance of a multi-component system considering the effect of failures on quality and production schedule: A case study

For a manufacturing equipment, any unplanned breakdown during the production period results into a high production loss. To keep the manufacturing facilities in good condition, preventive maintenance is planned. However, because of limited time and availability of resources, not all the system components can be or need to be repaired/replaced during a planned opportunity. Hence, the unplanned breakdowns can also be considered as an opportunity to do the maintenance activities for other components to take the advantage of economic dependency in multi-component system. However, when the system is under maintenance, it is very conservative to take the decision of maintenance actions on the components because of limited available time and resources. For such situation, this paper consider an opportunistic maintenance model for a multi-component system to take maintenance decision with a constraint on available time and the system availability requirements. The maintenance decisions for each component involves one of the three actions namely, repair, replace or do nothing to achieve the target availability with minimum maintenance cost. The model also considers the effect of component failures on the quality of product being manufactured as well as the production schedule on the machine. The cost of rejections is considered in the total failure cost along with the maintenance and downtime costs. The production schedule delay factor is considered as a constraint for the maintenance decision to account for the effect on production schedule delay. The optimal solution for the model is obtained using three solution methodologies namely simulated annealing, genetic algorithm and sequence heuristics. Using a real-life example of high pressure die casting machine, the opportunistic maintenance approach is demonstrated and results are discussed.     

DC magnetization studies in Nb/Fe superconducting multilayers

The behavior of superconducting transition temperature T_C in superconducting/ferromagnetic (S/F) multilayers as a function of different layer thicknesses and for varying magnetic moment μ_B of the F layer atoms is studied. Multilayer structures consist of five bilayers of constant superconducting Nb layer thickness of 400 Å and Fe of 6 and 24 Å each. The analysis of the magnetization data revealed that for t_Fe=6 Å, the Fe layer is non-magnetic. The interpretation of the observed T_C behavior is attributed to the change of the interaction of the cooper pairs with this layer at the onset of ferromagnetism for t_Fe=6 Å. The hysteresis curve recorded under isothermal conditions at 4.5 K for [Nb (400 Å)/Fe (6 Å)]₅ multilayers shows the usual M–H hysteresis behavior which is typical of a hard type-II superconductor exhibiting an irreversibility field H_irr of 3.5 kOe with substantial pinning at lower field. In addition, [Nb(400 Å)/Fe(6 Å)]₅ multilayer displays anomalous behavior in the form of paramagnetic peak in the superconducting state just below the transition temperature T_C=6.25 K.     

Recyclable Amberlyst-70 as a Catalyst for Biginelli Reaction: An Efficient One-Pot Green Protocol for the Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones using Amberlyst-70 as a recyclable catalyst has been developed. The use of resinous, nontoxic, thermally stable and inexpensive Amberlyst-70, as a recyclable heterogeneous catalyst, makes the process simple with negligible chemical waste. Thus renders this method an environmentally acceptable synthetic tool for Biginelli reaction.