原料预均化及其在优质矾土生产中的应用

原料预均化的基本原理为“平铺直取”．标准偏差和均化效果是考核均化过程的两个重要指标。标准偏差越小表示物料成分越均匀。原料预均化方式有多种，料仓式原料预均化库综合了各种方式的优点，它具有投资少，密封性好，占地面积小，无粉尘，操作条件和均化效果好等特点。     

Sex phermone components of mulberry looper,Hemerophila atrilineata butler (lepidoptera: Geometridae)

(6Z-9S, 10R)-Epoxy-octadecene (SR-1) and (3Z, 6Z-9S, 10R)-epoxy-octadecadiene (SR-2) are sex pheromone components of the mulberry looper (MBL),Hemerophila atrilineata Butler. Compounds extracted from female MBL pheromone glands were identified by coupled gas chromatographic-electroantennographic detection (GC-EAD) and GC-mass spectrometry. In field experiments in China,SR-2,RS-2, or both combined were hardly attractive, butSR-2 in combination withSR-1 attracted significant numbers of MBL males. Synergistic behavioral activity ofSR-1 plusSR-2, but not of corresponding antipode mixtures, indicates enantiospecificity of MBL pheromone communication. Because blends of racemic and enantiospecific (SR)1 plus2 were similarly attractive, racemic1 plus2 may have potential for mass trapping or confusion of MBL males in commercial mulberry plantations.     

Thermogravimetric analysis of methyl methacrylate‐graft‐natural rubber

The thermal degradations of methyl methacrylate‐graft‐natural rubber (MG) at different heating rates (B) in nitrogen were studied by thermogravimetric analysis. The results indicate that the thermal degradation of MG in nitrogen is a one‐step reaction. The degradation temperatures increase along with the increment of heating rates. The temperature of initial degradation (T₀) is 0.448B + 362.4°C, the temperature at maximum degradation rate, that is, the peak temperature on a differential thermogravimetric curve (T_p) is 0.545B + 380.7°C, and the temperature of final degradation (T_f) is 0.476B + 409.4°C. The degradation rate at T_p is not affected by B, and its average value is 48.9%; the degradation rate at T_f is not affected by B either, and its average value is 99.3%. The reaction order (n) is 2.1 and is not affected by B. The reaction activation energy (E) and the frequency factor (A) increase along with B, and the apparent reaction activation energy (E₀) is 254.6 kJ/mol. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2952–2955, 2002     

图计算加速器中稀疏向量比较单元的设计与实现

绝大多数图计算应用都可以映射为稀疏矩阵和向量运算,稀疏向量的比较运算是稀疏矩阵向量运算的计算瓶颈,为解决图计算加速器中稀疏矩阵列向量比较问题,设计一种稀疏向量比较运算电路,主要包括64个比较运算电路和一个共享存储单元.基于Verilog HDL语言完成电路设计,以SNAP(Stanford Network Analysis Project)上的Flickr数据集为例,在ModelSim SE-6410.1 c完成验证工作,采用Xilinx公司的ISE开发环境对硬件电路进行综合,实验结果表明,该电路的工作频率可以达到264 MHz.     

Expectation Maximization Algorithm for Time-delay Output-error Models Based on Finite Impulse Response Method

International Journal of Control, Automation and Systems - In this paper, an output error (OE) model with random time delay is identified by using the expectation maximization (EM) algorithm. Since...     

基于贝叶斯模型与最佳伙伴相似度量的目标跟踪

提出了一种基于产生式与判别式联合模型的视觉目标跟踪算法。首先介绍了一种基于全局颜色特征直方图特征的贝叶斯分类器,检测出若干最有可能属于目标的候选区域,然后利用最佳伙伴相似性度量（Best-Buddies Similarity）得到候选区域与目标模板的相似度,结合概率值与相似度值估计出最优的目标状态。通过划分目标-背景区域模型、目标-干扰区域模型,对可能产生干扰的区域提前进行抑制,降低了长期跟踪可能产生的漂移问题的风险,同时引入了自适应尺度估计机制和在线模型更新策略,以获得更为精准的跟踪结果。在37组具有挑战性的图像序列上与7种优秀的算法对比实验表明,所提出的算法能够有效应对光照变化、遮挡、旋转与尺度变化等多种问题。     

柴达木盆地西南部重力流沉积特征及其沉积模式研究

根据野外露头、岩心观察和测井分析,在柴西南古近纪发现浊流和碎屑流2种重力流沉积。碎屑流以湖底扇的形式发育于山前滨浅湖带;浊流以浊积扇形式发育于半深湖中,这2种重力流在盆缘交替沉积。该区重力流沉积分为陡坡欠补偿型和缓坡过补偿型,前者形成近岸湖底扇+碎屑流—浊积扇沉积组合,后者形成扇三角洲—浊积扇沉积组合。     

损伤变量对复合材料损伤演化过程的影响分析

复合材料层合板损伤模型中的刚度退化需要通过损伤变量来实现。针对通常采用的2种损伤变量定义,给出了统一表达式。此外,损伤刚度矩阵是损伤变量的函数,基于应变等效假设推导了三维损伤刚度矩阵,从而避免了对损伤刚度矩阵的人为假定。最后,通过复合材料层合板在冲击载荷作用下的数值模拟,讨论了损伤变量的2种定义对数值结果的影响,表明损伤变量的不同定义对分层和基体损伤分布存在一定的影响,对冲击载荷的影响不大。建议在复合材料损伤模拟中,应予关注损伤变量。     

多点泰勒展开的渐进构造和显式计算及应用

渐进式构造公式具有渐进性,即假设得到n次逼近阶的n次多项式且需要计算具有n+1次逼近阶的n+1次多项式时,在n次多项式的基础上增加一项新的多项式及其对应的常系数即可,从而极大地简化了相应的计算量,且在多项式逼近等方面有着较重要的应用。该文给出了多点泰勒展开式的渐进式构造方法及其显式公式,并应用于曲线的逼近问题中。数值例子表明,与已有的方法相比,该文方法在次数变化时具有更小的计算量,或更好的逼近效果。     

生物拆分制备(S)-α-乙基-2-氧-1-吡咯烷乙酸工艺研究

耐酪氨酸冢村氏菌(Tsukamurella tyrosinosolvens)E105可选择性催化(R,S)-α-乙基-2-氧-1-吡咯烷乙酸乙酯生物拆分制备左乙拉西坦关键手性中间体(S)-α-乙基-2-氧-1-吡咯烷乙酸.通过单因素实验和响应面法对菌株产酶培养条件进行优化,并考察含酶静息细胞催化制备(S)-α-乙基-2-氧-1-吡咯烷乙酸的反应过程.结果表明:最优产酶培养条件为装液量30%,接种量4%,发酵36h;培养基组成为葡萄糖17.70g/L,酵母膏16.53g/L,NH4Cl 9.5g/L,K2HPO42g/L,KH2PO41g/L,NaCl 0.6g/L,MgSO4·7H2O 0.5g/L,初始pH值7.32.在优化条件下,酶活力为19.33U/g,细胞干重达4.13g/L,分别较优化前提高了32.6%和60.1%.当细胞加量为30g/L,底物浓度60mmol/L,反应体系为300mL,拆分24h后,产率和ee值分别为48%和99%,(S)-α-乙基-2-氧-1-吡咯烷乙酸浓度达28.8mmol/L,较优化前提高了32.1%.