Automation of Thermotechnical Machinery in Glass Production

The operating principles of automated control system for glass-melting furnaces and drums for drying sand and dolomite are described.__________Translated from Steklo i Keramika, No. 4, pp. 20 – 22, April, 2005.     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.     

Service specifics of refractory lining in a float tank and tests of new heat-resistant composite materials

To avoid glass defects as a consequence of lining destruction in service and to preserve the operating conditions of a float tank equipment, it is necessary to use high-quality refractory materials which are developed taking into account their service specifics. Researchers at the Saratov Institute of Glass have identified maximum admissible fluctuation parameters for the gaseous atmosphere composition in the metal tank, which influences the destruction of refractory lining. New types of composites, namely, concretes on a refractory chamotte basis produced at the Semiluki Refractory Works, have been tested in the service conditions.     

Intraoperative neurological monitoring

Intraoperative neurological monitoring (INM) is the evaluation of the nervous system within the operating room (OR) environment. In this paper, the INM system is tested in a clinical setting in comparison with conventional somatosensory evoked potential (SEP) monitoring. The study results demonstrate the capability of the INM system in extracting clearer and more stable SEP signals. The high SNR of SEP signals collected in various clinical environments, including the OR, makes the INM system a robust platform for continuous monitoring. While the current use of EP monitoring is limited to intermittent analysis by a highly trained clinical neurophysiologist, the authors believe in changing this paradigm by developing continuous monitoring systems, such as the INM system, capable of automated quantitative EP analysis. This noninvasive monitoring modality will allow for a wider range of use in clinical practice. Based on volunteer and clinical patient studies, the INM monitoring system demonstrates much greater reliability and accuracy via the artifact rejection and denoising strategies. It provides more strategic filtering options for different situations under which the clinical SEP response signal could be greatly contaminated and distorted. Furthermore, the INM system offers a promising approach to signal extraction in real-time monitoring during SEP research.     

A rate adaptive bit-loading algorithm for in-building power-line communications based on DMT-modulated systems

This paper deals with a variable rate discrete multitone modulation system for broadband power-line communications, based on the bit-loading algorithm proposed by Leke and Cioffi. In the proposed system a suitable least mean square channel estimator is considered, which is based on the insertion of a training sequence (TS). The proposed approach will be compared with the ideal channel estimates, showing its effectiveness. Moreover, different TS lengths will be compared. The system performance, expressed in terms of bit rate and bit-error rate, is derived by simulation with and without estimation errors. The propagation environment has been assumed as a frequency-selective multipath fading channel with additive colored Gaussian noise, according to the in-building networks model.     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Microbial conversion of selected azo dyes and their breakdown products.

Four selected azo dyes (acid orange 6, acid orange 7, methyl orange and methyl red) were completely decolourised in the presence of anaerobic granular sludge, while only methyl red was degraded in aerobic conditions using a conventional activated sludge. Additional experiments with culture broth devoid of cells showed that anaerobic decolourisation of azo dyes was performed by extracellular reducing agents produced by anaerobic bacteria. This was further confirmed by abiotic experiments with sulphide and NADH. The presence of redox mediators such as riboflavin led to dramatic acceleration of the anaerobic biodecolourisation process. The azo dye reduction products were found to be sulphanilic acid and 4-aminoresorcinol for acid orange 6; sulphanilic acid and 1-amino-2-naphthol for acid orange 7; N,N-dimethyl-1,4-phenylenediamine and sulphanilic acid for methyl orange; and N,N-dimethyl-1,4-phenylenediamine and anthranilic acid for methyl red. Anaerobic toxicity assays showed that the azo dyes were more toxic than their breakdown products (aromatic amines), except 1-amino-2-naphthol. In the presence of activated sludge, only anthranilic acid was completely mineralised while sulphanilic acid was persistent. 4-aminoresorcinol, 1-amino-2-naphthol and N,N-dimethyl-1,4-phenylenediamine underwent autooxidation in aerobic conditions yielding coloured polymeric products. On the contrary, in the presence of granular methanogenic sludge, 4-aminoresorcinol, 1-amino-2-naphthol and anthranilic acid were quantitatively methanised, sulphanilic acid was partially (70%) mineralised while N,N-dimethyl-1,4-phenylenediamine was only demethylated producing 1,4-phenylenediamine as an end product.     

Neuronet Data Processing on the State of an Object After an Emergency

Neuronets are considered for processing data on the state of a potentially hazardous object after an emergency. An example is given of processing the data on the state of a potentially hazardous object in increments.Translated from Izmeritel’naya Tekhnika, No. 3, pp. 6–8, March, 2005.