Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Large Area Thick Films of PVDF‐TrFE and Relaxor‐Ceramics for Piezo‐ and Pyroelectric Applications

Wearable electronics, sensors, and energy harvesting devices are gaining an ever increasing importance in consumer products. Their success is, however, contingent on the availability of flexible and cost‐effective functional materials. The present paper presents an up‐scaled processing route for 0–3 thick film composites of the ferroelectric polymer polyvinylidenefluoride‐trifluoroethylene and a relaxor ceramic. Different compositions are investigated for pyro‐ and piezoelectric applications. Various samples are produced via tape casting and spin‐coating as freestanding and supported films of up to 600 × 200 mm² and on 150 mm silicon wafers, respectively. The samples are characterized in terms of thickness and roughness reproducibility, mechanical properties, and impedance. It is shown that good reproducibility and quality of the films can be realized. Depending on the application targeted (pyroelectric or piezoelectric), specific compositions together with the suitable poling process are presented. For instance, a composite with 24 vol% ceramic shows highest pyroelectric properties together with lowest piezoelectric thickness coefficient (d₃₃) when poled for pyroelectric applications. On the other hand, a composite with 50 vol% ceramic exhibits a d₃₃ of 100 pm V^?1 that is unsurpassed for this type of composites. These properties are advantageous in a large variety of applications, including wearable devices.     

Time-resolved photoelectron spectroscopy to probe ultrafast charge transfer and electron dynamics in solid surface systems and at metal-molecule interfaces

Photoelectron spectroscopy (PES) is a versatile tool, which provides insight into electronic structure and dynamics in condensed matter, surfaces, interfaces and molecules. The history of PES is briefly outlined and illustrated by current developments in the field of time-resolved PES. Our group's research is mostly aimed at studying ultrafast processes and associated lifetimes related to electronic excitation at solid surfaces.     

A ¹⁸F-labeled fluorobutyl-substituted spirocyclic piperidine derivative as a selective radioligand for PET Imaging of sigma₁ receptors

In this study, we synthesized and evaluated a new spirocyclic piperidine derivative 3 , containing a 4‐fluorobutyl side chain, as a PET radioligand for neuroimaging of σ₁ receptors. In vitro, compound 3 displayed high affinity for σ₁ receptors (K_i=1.2 nM ) as well as high selectivity. [¹⁸F] 3 radiosynthesis was performed from the corresponding tosylate precursor, with high radiochemical yield (45–51 %), purity (>98 %), and specific activity (>201 GBq μmol^?1). Metabolic stability of [¹⁸F] 3 in the brain of CD‐1 mice was verified, and no penetration of peripheral radiometabolites into the cerebral tissue was observed. Results of ex vivo autoradiography revealed that the distribution of [¹⁸F] 3 in the brain corresponded to regions with high σ₁ receptor density. The highest region‐specific total‐to‐nonspecific ratio was determined in the facial nucleus (4.00). Biodistribution studies indicated rapid and high levels in brain uptake of [¹⁸F] 3 (2.2 % ID per gram at 5 min p.i.). Pre‐administration of haloperidol significantly inhibited [¹⁸F] 3 uptake into the brain and σ₁ receptor‐expressing organs, further confirming in vivo target specificity.     

Quantitative proteomics for epigenetics

Mass spectrometry has made many contributions to the chromatin field through the mapping of histone modifications and the identification of protein complexes involved in gene regulation. MS-based proteomics has now evolved from the identification of single protein spots in gels to the identification and quantification of thousands of proteins in complex mixtures. Quantitative approaches also allow comparative and time-resolved analysis of post-translational modifications. An important emerging field is the unbiased interaction analysis of proteins with other proteins, defined protein modifications, specific DNA and RNA sequences, and small molecules. Quantitative proteomics can also accurately monitor whole proteome changes in response to perturbation of the gene expression machinery. We provide an up-to-date review of modern quantitative proteomic technology and its applications in the field of epigenetics.     

Visualizing biochemical activities in living cells through chemistry

The development of molecular probes to visualize cellular processes is an important challenge in chemical biology. One possibility to create such cellular indicators is based on the selective labeling of proteins with synthetic probes in living cells. Over the last years, our laboratory has developed different labeling approaches for monitoring protein activity and for localizing synthetic probes inside living cells. In this article, we review two of these labeling approaches, the SNAP-tag and CLIP-tag technologies, and their use for studying cellular processes.     

Iron oxide magnetic nanoparticles used as probing agents to study the nanostructure of mixed self-assembled monolayers

Self-assembled monolayers (SAMs) of organic molecules are of exceptional technological importance since they represent a convenient, flexible, and simple system for tuning the chemical and physical properties of surfaces. The fine control of surface properties is directly dependent on the structure of mixed SAMs which is difficult to characterize at the nanoscale with usual techniques such as scanning probe microscopies. In this study, we report on a general method to investigate at the nanoscale the structure of molecular patterns which consist in SAMs of two components. Iron oxide nanoparticles (NPs) have been used as probing agents to study indirectly the structure of mixed SAMs. Mixed SAMs were prepared by the replacement of mercaptododecane (MDD) adsorbed by mercaptoundecanoic acid (MUA) molecules on gold substrates. Therefore, the SAM surface displays both chelating carboxylic terminal groups and non-chelating methylene terminal groups. As NPs have been previously demonstrated to specifically interact with carboxylic acid groups, the increasing density in NPs was correlated with the evolution of the COOH/CH(3) terminal groups ratio. Therefore the structure of mixed SAMs was studied indirectly as well as the kinetic of the replacement reaction and its mechanism. With this aim, we took advantage of the SPR properties of the gold substrate and of the high refractive index of iron oxide nanoparticles to follow their assembling on mixed SAMs as a time resolved study. The high sensitivity and tuning of the SPR signal over a wide range of wavelengths are correlated with the NP density. Furthermore, SEM combined with image analysis has allowed studying the replacement rate of MDD by MUA in SAMs. We took also advantages of the magnetic properties of NPs to evaluate qualitatively the replacement of thiol molecules.     

Yttrium doping of Ba0.5Sr0.5Co0.8Fe0.2O3-δ part II: Influence on oxygen transport and phase stability

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) in its cubic perovskite phase has attracted much interest for potential use as oxygen transport membrane (OTM) due to its very high oxygen permeability at high temperatures. However, performance degradation due to a sluggish phase decomposition occurs when BSCF is operated below 840?°C. Partial B-site substitution of the transition metal cations in BSCF by larger and redox-stable cations has emerged as a potential strategy to improve the structural stability of cubic BSCF. In this study, the influence of yttrium doping (0…10?mol-%) on oxygen transport properties and stability of the cubic BSCF phase is assessed by in situ electrical conductivity relaxation (ECR) and electrical conductivity measurements during long-term thermal annealing both at 700?°C and 800?°C. Detailed phase analysis is performed by scanning electron microscopy (SEM) after long-term annealing of the samples in air at different temperatures.     

Thin water films and particle morphology evolution in nanocrystalline MgO

A key question in the field of ceramics and catalysis is how and to what extent residual water in the reactive environment of a metal oxide particle powder affects particle coarsening and morphology. With X‐ray Diffraction (XRD) and Transmission Electron Microscopy (TEM), we investigated annealing‐induced morphology changes on powders of MgO nanocubes in different gaseous H₂O environments. The use of such a model system for particle powders enabled us to describe how adsorbed water that originates from short exposure to air determines the evolution of MgO grain size, morphology, and microstructure. While cubic nanoparticles with a predominant abundance of (100) surface planes retain their shape after annealing to T = 1173 K under continuous pumping with a base pressure of water p(H₂O) = 10^?5 mbar, higher water partial pressures promote mass transport on the surfaces and across interfaces of such particle systems. This leads to substantial growth and intergrowth of particles and simultaneously favors the formation of step edges and shallow protrusions on terraces. The mass transfer is promoted by thin films of water providing a two‐dimensional solvent for Mg²⁺ ion hydration. In addition, we obtained direct evidence for hydroxylation‐induced stabilization of (110) faces and step edges of the grain surfaces.     

Water sorption in poly(vinyl alcohol) membranes: An experimental and numerical study of solvent diffusion in a crosslinked polymer

The development of reliable mathematical models for mass transport in crosslinked polymers and their thorough experimental validation are of substantial interest in the design of technical membrane processes or the assessment of polymer performance when applications such as functional films and protective coatings are concerned.The present study aims at the joint experimental and numerical characterisation of mass transport during water vapour sorption into physically crosslinked poly(vinyl alcohol) membranes. A mathematical model comprising both phase equilibrium and the respective mass transport mechanisms is proposed and verified by means of in situ sorption kinetic measurements. Drawing on the independent determination of equilibrium solvent uptake, the comparison of model calculations and experimental sorption data demonstrates that water transport in the crosslinked polymer membrane is successfully described by pure Fickian diffusion with a simple exponential expression for the solvent diffusion coefficient to account for its pronounced concentration dependency, allowing the latter to be specified quantitatively.