The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.     

Grain refinement of Al-7Si alloys and the efficiency assessment by recognition of cooling curves

Under sand cup solidification condition, the influence of Ti, B concentration, and holding time on the grain size of a high-purity Al-7Si alloy has been systematically studied. It is found that the grain size decreases rapidly at lower Ti or B additions, and is almost constant at the higher concentrations. For Al-3B refined Al-7Si alloys, the grain size increases at the initial period of holding time, and then rapidly becomes independent of holding time; while for Al-7Si alloys refined with Al-5Ti-1B, the grain size increases with holding time throughout. To evaluate the refinement efficiency, a new method named “intelligent evaluating of melt quality by pattern recognition of thermal analysis cooling curves” has also been introduced in this article. The results show that comparing the cooling curve of the evaluated melt with those in a database to find the most similar one to it can precisely assess the grain refinement efficiency of the measured Al-7Si alloy. In addition, the influence of Ti, B addition levels, and pouring temperatures on some characteristic parameters of cooling curve has also been discussed.     

Mixed anaclitic-introjective psychopathology in treatment-resistant inpatients undergoing psychoanalytic psychotherapy.

Utilizing data from the Riggs-Yale Project, 45 male and 45 female 18-29-year-old treatment-resistant inpatients undergoing intensive psychoanalytically oriented treatment were studied. Twenty-seven mixed-type anaclitic-introjective inpatients were compared with 29 "pure" anaclitic and 34 "pure" introjective inpatients. At intake, mixed-type inpatients were more clinically impaired (i.e., were more symptomatic, cognitively impaired, and thought disordered) and more vulnerable (i.e., less accurate object representations and more frequently used maladaptive defense mechanisms) in comparison with clearly defined anaclitic and introjective patients. Mixed-type patients, however, improved significantly more in the course of psychoanalytically oriented treatment, in terms of clinical functioning (i.e., symptoms, cognitive functioning) and psychological vulnerability (i.e., utilization of more adaptive defense mechanisms). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

10?30 GHz monolithic GaAs travelling-wave divider/combiner

A four-way monolithic GaAs travelling-wave power divider/combiner has been designed, fabricated and evaluated. With a design centre frequency of 20 GHz, a bandwidth of from 10 GHz to 30 GHz has been measured. The insertion loss per dividing or combining action is less than 0.5 dB, with isolation between ports no worse than 20 dB. The input/output VSWRs are better than 2:1 across the same band. This divider/combiner can readily be used with monolithic GaAs power FET amplifiers to produce a several-fold increase in output powers over the 10 to 30 GHz frequency range.     

Modeling of Temperature–Frequency Correlation Using Combined Principal Component Analysis and Support Vector Regression Technique

A good understanding of environmental effects on structural modal properties is essential for reliable performance of vibration-based damage diagnosis methods. In this paper, a method of combining principal component analysis (PCA) and support vector regression (SVR) technique is proposed for modeling temperature-caused variability of modal frequencies for structures instrumented with long-term monitoring systems. PCA is first applied to extract principal components from the measured temperatures for dimensionality reduction. The predominant feature vectors in conjunction with the measured modal frequencies are then fed into a support vector algorithm to formulate regression models that may take into account thermal inertia effect. The research is focused on proper selection of the hyperparameters to obtain SVR models with good generalization performance. A grid search method with cross validation and a heuristic method are utilized for determining the optimal values of SVR hyperparameters. The proposed method is compared with the method directly using measurement data to train SVR models and the multivariate linear regression (MLR) method through the use of long-term measurement data from a cable-stayed bridge. It is shown that PCA-compressed features make the training and validation of SVR models more efficient in both model accuracy and computational costs, and the formulated SVR model performs much better than the MLR model in generalization performance. When continuously measured data is available, the SVR model formulated taking into account thermal inertia effect can achieve more accurate prediction than that without considering thermal inertia effect.     

Peripheral nerve injury as a complication from orthopedic operation

We report a case of pulmonary carcinosarcoma. Surgery is required for this rare mixed type, biphasic tumor. It is generally considered to be a malignant formation issuing from a single cell line but with a two-way differentiation into epithelial and conjunctive components. There is a differentiation continuum between spindle-cell carcinomas (also called monophasic sarcomatoid carcinoma) and carcinosarcoma (or biphasic sarcomatoid carcinoma) leading to debate concerning the immunohistochemical and ultrastructural features.     

Hydrogen peroxide in exhaled air is increased in stable asthmatic children

Exhaled air condensate provides a noninvasive means of obtaining samples from the lower respiratory tract. Hydrogen peroxide (H2O2) in exhaled air has been proposed as a marker of airway inflammation. We hypothesized that in stable asthmatic children the H2O2 concentration in exhaled air condensate may be elevated as a result of airway inflammation. In a cross-sectional study, 66 allergic asthmatic children (of whom, 41 were treated with inhaled steroids) and 21 healthy controls exhaled through a cold trap. The resulting condensate was examined fluorimetrically for the presence of H2O2. All subjects were clinically stable, nonsmokers, without infection. The median H2O2 level in the exhaled air condensate of the asthmatic patients was significantly higher than in healthy controls (0.60 and 0.15 micromol, respectively; p<0.05), largely because of high values in the stable asthmatic children who did not use anti-inflammatory treatment (0.8 micromol; p<0.01 compared to controls). We conclude that hydrogen peroxide is elevated in exhaled air condensate of children with stable asthma, and may reflect airway inflammation.