铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

Simulation study of peak junction temperature and power limitationof AlGaAs/GaAs HBTs under pulsed and CW operation

The authors have used a 3-D transmission-line matrix (TLM) modeling method to study the junction temperature distribution and power limitation of device geometries with multiple embedded heat sources. Peak values of the junction temperature against the dissipated power density under both pulsed and CW operation are presented for a typical power AlGaAs/GaAs HBT structure. These data should facilitate the rapid determination of junction temperature for a given output power, which is of paramount importance in power device design     

极尖断面为折线的四极透镜磁性能研究

对传统双曲线极尖的四极透镜进行了磁性能分析。在此基础上，提出了极尖断面为折线的四极透镜结构。磁场的数值分析以及测量结果表明：该结构产生的场梯度均匀，且具有磁场集中、磁场梯度高、便于加工和安装的对称性控制等优点。该结构的四极透镜已用于ＣＹＣＩＡＥ－３０回旋加速器和ＨＩ－１３串列加速器束流输运线之中     

TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.     

The Effect of Initial Inventories in a Two-Echelon System

A model in which jointly optimal stocks of material and finished products are to be chosen is reexamined. While it costs less to hold material, a certain percentage of the random demand not immediately satisfied by previously finished products is lost. We pay particular attention to the dependence of the optimal stocks on the initial ones, which assumes an interesting form. For example, if the stock of finished products is high but the combined stock is low, die quantity of material ordered depends on the stock of finished products.     

2,3,4- or 2,3,5-trisubstituted furans: catalyst-controlled highly regioselective ring-opening cycloisomerization reaction of cyclopropenyl ketones

2,3,4- or 2,3,5-trisubstituted furans were highly regioselectively formed from the cycloisomerization reaction of the same starting cyclopropenes 1 via the subtle choice of the transition metal halides. Under the catalysis of 5 mol % PdCl2(CH3CN)2, 2,3,5-trisubstituted furans 2 were given in 50-88% yields with 95-99% regioselectivities, while 2,3,4-trisubstituted furans 3 were formed in 78-96% yields with 99% regioselectivities under the catalysis of 5 mol % CuI.     

AN improved method of optimization for electrical machines

Methods of optimizing the design of electrical machines are discussed. The augmented Lagrangian multiplier method is described, and an algorithm for this method is introduced. The method is compared with the more familiar exterior penalty function method using, as an example, the cost optimization of permanent magnetic variable-speed drive motors. The improved method is shown to be superior, both in its ability to reach an optimum consistently and in the number of required iterations     

浅析企业人才的"留"与"流"

文章分析了人才在企业管理和促进企业发展中的重要性,提出在人才招聘中应注意的三个方面因素,全方位分析了留住人才与人才流动之间的关系.     

Performance characteristics of parallel resonant convertor

Using a set of characteristic curves derived from the stateplane analysis, a novel approach to the design of the parallel resonant convertor (PRC) is presented. It will be shown that the steady-state response of the convertor can also be obtained from these characteristic curves