薄板坯连铸连轧工艺对铌微合金化高强度钢组织和性能的影响

首先建立薄板坯连铸连轧工艺的试验室模拟技术，并运用该模拟技术，研究薄板坯连铸连轧工艺(CSP)和传统板坯再加热工艺(TRP)两种工艺对铌微合金化高强度钢的显微组织和力学性能的影响。研究结果表明：CSP钢的晶粒细化效果不如TRP钢，两者的平均铁素体晶粒尺寸分别为8．17μm和6．30μm。在CSP试验钢板中铌的析出量较大，特别是在铁素体中细小颗粒的铌的析出物较多，沉淀强化效果较强。CSP试验钢的σ0.5和σb分别较TRP工艺低约40MPa和约25MPa，同时其低温冲击韧性较好，FATT温度较低。     

La2（MoO4）3：Eu均-花瓣状微／纳米结构的构筑及其荧光性能

在表面活性剂十二烷基硫酸钠（SDS）的作用下，采用温和的水热方法，成功制备了Eu掺杂的花瓣状L丑2（MoO4）3：Eu纳米微结构。这些形貌新颖的微米绒球的直径约3μm，由厚度30nm左右的纳米片次级结构单元自组装构筑而成，分散性良好，形貌规整、大小均一。通过XRD、SEM、TEM测试技术，研究了形貌的形成机理。由于具有良好的结晶度，这些花瓣状La2（MoO4）3：Eu纳米微结构显示出良好的发光性能。     

高炉冷却壁失效原因研究

本文针对安钢高炉冷却壁破损的形式、原因进行研究分析,探讨了冷却壁的结构、材质、加工与安装工艺对其寿命的影响。介绍了安钢高炉炉役后期冷却壁的维护生产实践。     

锌基合金模具的应用及探讨

本文分析了锌基合金模具制造及使用过程中容易出现热裂、翘曲、收缩的问题，并提出了解决这些问题的措施。     

矿业投资问题和对策——以铜矿开发为例

本文以铜矿开发为例 ,从 5个方面分析了矿山企业融资困难实际情况 ,并对改变矿业投资难的重要性和必要性做了详细论述 ,最后对解决矿业投资难问题提出了有效途径和办法     

浅议第一方检测认可实验室管理心得

本文结合实际情况,具体阐述了作为第一方检测认可实验室在日常管理工作中面临的问题和解决思路,对提高日常实验室管理水平提出了个人观点.     

A New Matlab De-noising Algorithm for Signal Extraction

The goal of a de-noising algorithm is to reconstruct a signal from its noise-corrupted observations. Perfect reconstruction is seldom possible and performance is measured under a given fidelity criterion. In a recent work, the authors addressed a new Matlab algorithm for de-noising. A key method of the algorithm is selecting an optimal basis from a library of wavelet bases for ideal de-noising. The algorithm with an optimal basis from a library of wavelet bases for de-noising was created through making use of Matlab＇s Wavelet Toolbox. The experimental results show that the new algorithm is efficient in signal de-nosing.     

A Cold Model Aerodynamical Test of Air-Staged Combustion in a Tangential Firing Utility Boiler

The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.     

基于能力拍卖和多Agent的综合生产计划分布式建模及求解

把拍卖和市场理念引入到生产计划的求解过程中,结合多Agent理论,对大规模生产系统按生产单元建立分布式模型.各个生产单元看作相对独立核算的经济实体,其目标是实现自身利益最大化.当生产能力足够时,按照需求进行生产;当生产能力不足以完全满足需求时,紧缺生产资源的持有者按照单位能力获得最大收益的原则进行生产竞价与拍卖,实现了各个生产单元的分布式自主协商决策,并设计了求解算法.算例研究证明该方法的可操作性和求解的有效性.     

高压低温先导式安全阀的设计

介绍了一种某试验系统用高压低温先导式安全阀,主要从工作原理、结构特点、材料的选用、结构特点、试验等方面进行阐述。