On mass transfer effect due to electrolytically evolved gas

Based on the Ibl penetration model mass transfer equations for gas-evolving electrodes were derived and compared to the effect of forced convection. Experimental studies were conducted in a rectangular flow channel with the working electrode facing downward. The variables were linear bubble velocity, linear electrolyte velocity, nature of the gas and electrode position. Up to bubble velocities (U_x) of 2 and 6 cm s⁻¹ for O₂ and H₂ gases respectively, the thickness of the Nernst diffusion layer (δ_av) was described well by the equation δ_av = [Dd_eL/(U_x)_av]^1/3. Intermediate slopes between − 1/3 and − 1 were observed for O₂ bubble velocities between 2 and 6 cm s⁻¹. A theoretical derivation suggests that in the absence of bubble coalescence, the mass transfer effect due to laminar flow induced by electrolytically evolved gas exceeds that due to forced external laminar flow for all practical channel designs.     

Ionization of Acetylacetone in Me2SO—Water Mixtures. Reactivity—Selectivity Principle or Principle of Imperfect Synchronization?

Rate constants for the reversible deprotonation of acetylacetone were measured in carboxylate and amine buffers in water and in 50%, 90% and 95% Me₂SO at 20°C. The Brønsted plot for the carboxylate ions is curved in the Me₂SO—water mixtures, but straight in water. The curvature is in the direction predicted by the Reactivity—Selectivity Principle (RSP). However, the Brønsted plot for the reaction with primary amines is straight in all solvents. This suggests that the curvature observerd with the carboxylate ions is caused by loss of solvation of the base; this loss of solvation is ahead of bond formation in the transition state rather than being a manifestation of the RSP. (Note that all Brønsted plots are based on pK_a values measured in the respective solvents.) The intrinsic rate constant (k₀) for proton transfer increases with the addition of Me₂SO, and more so with the carboxylate buffers than with the amines. This increase in k₀ is attributed to delayed solvation of the developing enolate ion in the transition state; with the carboxylate buffers, an additional factor is the early loss of solvation of the base. The various solvation effects observed in this study can all be understood in the context of the Principle of Imperfect Synchronization (PIS).     

Low backmixing in multistage agitated contactors used as reactors

The objective of the study was to test the validity of an available backmix correlation in the low backmix regime required by multistage agitated contactors used as reactors. The correlation was found to be inapplicable, and new equation forms were developed to fit the new experimental data. Keys to low backmix rates are a small annular area around the shaft compared to the column cross-sectional area and an extended annular path length.     

Factors affecting cloud point analysis of palm oleins

Some of the factors affecting cloud point determination of palm oleins are described. These are the type of container used, method of stirring, rate of stirring and bath temperature. The repeatability and reproducibility standard deviations of the method are determined from collaborative trials. Recommendations for the test are made to reduce the large variations among laboratories.     

A test for the statistical significance of DNA sequence similarities for application in databank searches

A method is developed, based on word-searching, which provides a rapid test for the statistical significance of DNA sequence similarities for use in databank searching. The method makes allowance for the lengths and dinucleotide compositions of the sequences being compared. A way is also described to calculate the power of the test, i.e. the probability of detecting a given similarity as being statistically significant. The effects on the power of the test of the scoring method, word length, sequence length, and sequence composition are examined. A novel scoring method is shown to be superior to the method currently used in most word-searching algorithms.     

Performance of combined cobalt—nickel—zirconia and HZSM-5 catalyst systems for carbon monoxide hydrogenation

The synthesis of hydrocarbons via hydrogenation of carbon monoxide was investigated over cobalt—nickel—zirconia catalysts of various compositions in combination with zeolite HZSM-5 in “mixed bed” and “follow bed” arrangements. These combinations resulted in the formation of aromatics in amounts as high as 30-35 wt% under relatively mild operating conditions (1 atm, 250–280°C). Although the olefinicity of C₂ and C₃ fractions in the product stream was higher in the mixed bed compared to the follow bed arrangement, the selectivities to aromatics were comparable in the two bed arrangements. The aromatic selectivity was found to be sensitive to operating conditions. The formation of aromatics was favored at high HZSM-5/metal catalyst ratios, low space velocities and high reaction temperatures. The product distributions obtained using various metal/zeolite bifunctional catalysts have been discussed.     

Purification of Ellagic Acid by UF Membranes

Ellagic acid (2, 3, 7, 8‐tetrahydroxy(1)benzopyrano(5, 4, 3‐cde)(1)benzopyran‐5, 10‐dione) was selected as a model pollutant which is present in the tannic fraction of cork processing wastewater. The ultrafiltration of aqueous ellagic acid solutions through three membranes was studied in tangential UF laboratory equipment. Two of the membranes were polyethersulfone (Biomax10K and Biomax5K, with MWCO of 10000 and 5000 Da, respectively), and the third made of regenerated cellulose (Ultracel5K, with MWCO of 5000 Da). The water hydraulic permeability was evaluated for each membrane. The evolution of the permeate flow rate with processing time was followed, and the influence of the main operating variables (feed flow rate, trans‐membrane pressure and nature of the membranes) on the permeate flux was also established. According to the hypothesis of the film theory, the intrinsic and apparent rejection coefficients, as well as the mass transfer coefficients, were also determined, and the values obtained were discussed as a function of the operating conditions used.     

Biochemical oxidation of caprolactam-containing wastewater from the production of synthetic fibres

Conclusions The chemical mutagenesis method is recommended for use in local purification installations for cleaning up of caprolactam-containing wastewater.Use of this method permits one to carry out a biochemical clean-up of wastewater having a caprolactam content up to 600 mg/liter while increasing the oxidative power of the aeration tank by a factor of two.Translated from Khimicheskie Volokna, No. 6, p. 46, November–December, 1985.     

Experimental Study of Ice Jam Thickening under Dynamic Flow Conditions

River ice jams are a common occurrence on northern rivers, and their formation can present a severe flood risk to nearby communities. As more and more river regulation projects are developed to provide an alternative to fossil fuels for electrical power-generating capacity, our need to understand the mechanisms associated with ice jam formation under variable flow conditions becomes more vital. This is because, at present, hydropeaking operations are often severely curtailed during the ice-affected seasons due to concerns that sudden flow fluctuations might instigate ice jams and associated flooding. Here, an experimental investigation explores the effects of rapid increases in discharge on ice jam formation and evolution. It is found that the thickness of ice jams formed under highly dynamic flow conditions tend to be slightly thinner than those formed during steady carrier flows for comparable discharges. Also, despite the highly dynamic nature of these consolidation events, the resulting ice thicknesses appear reasonably well approximated by steady flow theory.