激光技术在医学应用的若干进展

本文评介激光医学机理、应用和进展,以及发展方向。     

B—ISDN宽带UNI信令点到多点配置的实现

本文根据ＩＴＵ－Ｔ最新的Ｑ．２９７１协议，以及笔者所从事的实际课题，提出一整套Ｂ－ＩＳＤＮ第三层ＵＮＩ信令的软件实现策略，其特点是能同时满足用户对点到点以及点到多点广播这两种通信方式的要求，而且可以动态配置。     

显影液QA,QC的科学方法

本文为自动洗片机用高温快速显影液的科学管理与质量保证提供了简便、科学的检测方法,力医(?)影像质量的提高提供了可靠的保证。具有科学性、实用性、普及性。     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

沉积方式与基体材料对TiN薄膜内应力的影响

本文研究了TiN薄膜在化学气相沉积、物理气相沉积(包括热灯丝离子镀和多弧离子镀)以及等离子增强化学气相沉积等不同生成条件下的内应力变化。并通过改变钢及硬质合金基体的化学成份和表面状态。考察了基体材料对薄膜应力的影响。在此基础上,对薄膜内应力的形成机制进行了分析讨论。     

变速箱结构设计专家系统技术的研究

结构设计是机械产品设计过程中的重要环节，解决结构设计的智能化不但可以缩短产品的设计周期，而且还可以降低成本，提高设计质量。专家系统是解决智能化设计的技术之一。本文讨论有关结构专家系统的几个关键技术，主要包括系统的控制策略，面积对象的知识表达方式及结构设计的并行设计     

化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

地面立体摄影测量在露天矿山的应用

本文针对露天矿验收测量的特点，论述了露天矿验收地面立体摄影测量方法及其内业处理系统，并将地面立体摄影测量结果与ＥＤＭ解析法测量结果进行了比较。     

Silicon carbide-toughened zirconia ceramics

Tetragonal zirconia polycrystalline (TZP) ceramics containing SiC reinforcement in the form of fine particles (nano-scale), particles (micro-scale), whiskers and platelets were synthesized by hot-pressing. The effects of morphology and grain size of SiC reinforcement on the strength and fracture toughness at room temperature were investigated. The addition of SiC (in whatever form) caused decreases in strength and toughness at room temperature with the exception of whisker-reinforced materials. Toughness fell off with increasing temperature, but nevertheless retained about one-half of the room-temperature value for that particular SiC reinforcement. However, the whisker- and particle-reinforced materials had higher K _lc values at high temperature than fine particle- or platelet-reinforced materials, with values in excess of 7 MPa m^1/2 at 1000 °C. The microstructure was examined for SiC whisker-reinforced/TZP materials by TEM and HREM, to examine the nature of the whisker/zirconia interface.     

Microbial degradation of di-n butyl phthalate

Microorganisms capable of degrading di-n-butyl phthalate (DBP) were isolated. The characteristics of DBP biodegradation by immobilized and free cells were investigated. The experimental results showed that the rate of DBP degradation of immobilized cells was higher than that of free cells.