Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

钢铁表面锌系磷化膜的研究

本文采用ＳＥＭ和ＴＥＭ等测试手段，研究了四功能处理液不同条件下在钢铁表面上形成锌系磷化膜的形貌，晶体结构；采用ＥＤＳ研究了磷化膜的化学成发，通过实验确定了Ｚｎ／Ｐ值在２．１２～３．２０时，磷化膜具有良好的耐蚀性。     

Bead-based polymerase chain reaction on a microchip

We present a bead-based approach to microfluidic polymerase chain reaction (PCR), enabling fluorescent detection and sample conditioning in a single microchamber. Bead-based PCR, while not extensively investigated in microchip format, has been used in a variety of bioanalytical applications in recent years. We leverage the ability of bead-based PCR to accumulate fluorescent labels following DNA amplification to explore a novel DNA detection scheme on a microchip. The microchip uses an integrated microheater and temperature sensor for rapid control of thermal cycling temperatures, while the sample is held in a microchamber fabricated from (poly)dimethylsiloxane and coated with Parylene. The effects of key bead-based PCR parameters, including annealing temperature and concentration of microbeads in the reaction mixture, are studied to achieve optimized device sensitivity and detection time. The device is capable of detecting a synthetically prepared section of the Bordetella pertussis genome in as few as 10 temperature cycles with times as short as 15?min. We then demonstrate the use of the procedure in an integrated device; capturing, amplifying, detecting, and purifying template DNA in a single microfluidic chamber. These results show that this method is an effective method of DNA detection which is easily integrated in a microfluidic device to perform additional steps such as sample pre-conditioning.     

基于JSP的移动开发技术论坛的设计与实现

本文讨论基于B/S模式的一种JSP论坛的设计与实现。完成的功能模块包括用户注册,浏览板块,发帖,回帖等,管理员编辑,删除等管理帖子功能,管理管理员用户功能等。     

PARAMAGNETIC MEISSNER EFFECTS IN MELT-TEXTURED Y_(0.99)Nd_(0.01)Ba_2Cu_3O_(7-y)SUPERCONDUCTOR

The paramagnetic Meissner effect (PME) was observed on the field-cooled M-T curvesof melt-textured Y0.99Nd0.01Ba2Cu3O7-y in applied magnetic fields from 1kOe toJ0kOe. In the magnetic field below 1kOe, the sample undergoes the typical transi-tion from the normal state to the superconducting state when it was cooled down. Theapplied magnetic fields in which the PME occurs, are very high compared with thefields reported in literatures. We propose that the occurrence of the PME may be dueto a phase transition of flux vortices in the superconductors.     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.     

时间触发以太网的分布式任务负载均衡分配方法

对于以时间触发以太网(time-triggered Ethernet,TTE)为互连基础设施的分布式综合化系统,通过将各个任务的物理拓扑、虚拟链路拓扑等多种设计约束属性转化定义为代价函数。提出了一种将信息处理和通信任务指派并映射到分布嵌入式资源的方法,使设计者能够利用TTE网络通信的时间确定性机制,统一地安排处理任务和通信任务。采用模拟退火算法启发式求解优化问题,保证网络节点处理和节点间通信的负载均衡性。通过一个TTE网络拓扑下任务分配的案例,采用软件仿真的形式说明这种方法的适用性。     

A general non-local denoising model using multi-kernel-induced measures

Noises are inevitably introduced in digital image acquisition processes, and thus image denoising is still a hot research problem. Different from local methods operating on local regions of images, the non-local methods utilize non-local information (even the whole image) to accomplish image denoising. Due to their superior performance, the non-local methods have recently drawn more and more attention in the image denoising community. However, these methods generally do not work well in handling complicated noises with different levels and types. Inspired by the fact in machine learning field that multi-kernel methods are more robust and effective in tackling complex problems than single-kernel ones, we establish a general non-local denoising model based on multi-kernel-induced measures (GNLMKIM for short), which provides us a platform to analyze some existing and design new filters. With the help of GNLMKIM, we reinterpret two well-known non-local filters in the united view and extend them to their novel multi-kernel counterparts. The comprehensive experiments indicate that these novel filters achieve encouraging denoising results in both visual effect and PSNR index.     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003