Electrospinning of collagen-chitosan complex

The collagen-chitosan complex nanofibers have been prepared for the first time by electrospinning. The mixed HFP/TFA (the volume ratio of 90/10) was found to be the appropriate solvent for electrospinning. The concentration of the spinning solution and the ratio of chitosan/collagen were varied and adjusted to get smooth nanofibers. It was found that the diameter of the spun fibers became thick with the concentration of the solution increasing and became fine with the ratio of the chitosan/collagen increasing. We have characterised the molecular interactions in collagen-chitosan complex by Fourier transform infrared spectroscopy. The spun fibers are designed to mimic the native extracellular matrix for tissue engineering and to develop functional biomaterials.     

转炉脱磷效果影响因素分析

从氧气顶吹转炉脱磷的热力学分析入手,探讨了冶炼过程中温度、炉渣碱度、(FeO)对磷含量的影响,回磷的原因、影响因素及防止措施等,指出应控制炉渣碱度、终点温度、(FeO)在合理范围内,应重视钢水回磷问题。     

New bottle but old wine: A research of cyberbullying in schools

This study investigates the nature and the extent of adolescences’ experience of cyberbullying. A survey study of 177 grade seven students in an urban city is conducted. In this paper, “cyberbullying” refers to bullying via electronic communication tools. The results show that almost 54% of the students were victims of traditional bullying and over a quarter of them had been cyber-bullied. Almost one in three students had bullied others in the traditional form, and almost 15% had bullied others using electronic communication tools. Almost 60% of the cyber victims are females, while over 52% of cyber-bullies are males. Majority of the cyber-bully victims and bystanders did not report the incidents to adults.     

Flexural and Shear Rigidity of Composite Sheet Piles

The flexural and shear rigidity of pultruded composite sheet pile panels consisting of E-glass fiber-reinforced polyester are studied in this paper. The analysis consists of an experimental investigation and an analytical modeling to determine the resistance of the sheet pile panels to the deflections for design of composite sheet pile walls. Timoshenko’s beam theory was used to experimentally determine the flexural rigidity (EI) and shear rigidity (kAG) of the panel. Three- and four-point bending tests were performed on six different span lengths and the results were self-compared from the two independent tests. Analytical expressions for the flexural and shear rigidities were derived to allow the prediction based on the layered structure of pultruded shapes. The values computed from the analytical expressions were examined with the experimental results.     

Syntheses and Structural Characterization of Triorganotin Derivatives of Bis(carboxymethyl)trithiocarbonate: X-ray Crystal Structures of 2D Network Polymers

Six triorganotin(IV) complexes of the type {(R₃Sn)₂[C₃S₃(COO)₂]}_n (R = C₆H₅ 1; n-Bu 2; PhCH₂ 4; p-F-PhCH₂ 5; o-F-PhCH₂ 6) and {(R₃Sn)₂[C₃S₃(COO)₂]}_n·[EtOH] (R = Me 3) have been synthesized by the reaction of bis(carboxymethyl)trithiocarbonate with triorganotin(IV) chloride in the presence of sodium ethoxide. All complexes were characterized by elemental analysis IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Except for 4–6, all complexes were also characterized by X-ray crystallography. The X-ray date revealed that complexes 1–3 show two-dimensional network polymeric structure in which the geometries of tin atoms are trigonal bipyramid with the axial positions occupied by carboxylic oxygen atoms.     

过程控制级模拟轧钢系统的研制及在热轧试车中的应用

宝钢集团上海第一钢铁有限公司(后面简称一钢)新建的不锈钢工程1780热轧项目中,为了能在较短周期内完成所有的应用软件开发与测试任务,特别研制了模拟轧钢功能。本论文主要阐述利用计算机的集成思想,结合热轧工艺,来开发模拟轧钢功能,以及利用模拟轧钢进行现场各种情况的模拟测试。     

离散系统LQ调节器的鲁棒性分析

本文研究了离散ＬＱ调节器系统鲁棒稳定性问题，稳定的不确定参数是通过考虑参数摄动的方向而求得的，这种方法比现有文献提供的结果具有更好的稳定范围。     

Unified analytical expressions for calculating resonantfrequencies, transimpedances, and equivalent input noise currentdensities of tuned receiver front ends

Unified analytical expressions have been derived for calculating the resonant frequencies, transimpedance and equivalent input noise current densities of the four most widely used tuned optical receiver front ends built with FETs and p-i-n diodes. A more accurate FET model has been used to improve the accuracy of the analysis. The Miller capacitance has been taken into account, and its impact on the performances of the tuned front ends has been demonstrated. The accuracy of the expressions has been verified by Touchstone simulations. The agreement between the calculated and simulated performances of the front ends is very good. The expressions can be used to investigate the performances of different tuned front ends in a very simple way and provide a good starting point for further computer optimizations of the front ends     

High-T/sub 0/ strain-compensated InGaAsSb-AlGaAsSb quantum-well lasers emitting at 2.43 /spl mu/m

Strain-compensated InGaAsSb-AlGaAsSb quantum-well (QW) lasers emitting near 2.5 /spl mu/m have been grown by solid-source molecular beam epitaxy. The relatively high arsenic composition causing a tensile strain in the Al/sub 0.25/GaAs/sub 0.08/Sb barriers lowers the valence band edge and the hole energy level, leading to an increased hole confinement and improved laser performance. A 60% external differential efficiency in pulsed mode was achieved for 1000-/spl mu/m-long lasers emitting at 2.43 /spl mu/m. A characteristic temperature T/sub 0/ as high as 163 K and a lasing-wavelength temperature dependence of 1.02 nm//spl deg/C were obtained at room temperature. For 2000 /spl times/ 200 /spl mu/m/sup 2/ broad-area three-QW lasers without lateral current confinement, a low pulsed threshold of 275 A/cm/sup 2/ was measured.