MCRC��ǻ��չ��ճ�̽

本文根据MCRC引进装置的情况,对加拿大Delta公司的MCRC硫回收工艺作了初步探索,介绍了该方法的工艺特征,并评述了引进装置的性能考核结果。文中还结合四川气田建厂的环保要求,评价了MCRC方法的使用价值及意义。     

BYJ型防喷脱接器的设计与应用

本文介绍了BYJ型防喷脱接器的结构和工作原理。它既有抽油杆与大泵活塞脱接功能,又能实现不压井作业施工,是大型抽油泵理想的配套工具。现场应用表明,该防喷脱接器对接成功率较高,并实现了大泵井不压井施工。     

超声波对化学镀Ni－Cr－P非晶态薄膜的金刚石性能的影响

研究了超声波对化学镀Ｎｉ－Ｃｒ－Ｐ非晶态薄膜的金刚石性能的影响。结果表明，超声波可使金刚石表面非晶态薄膜更加均匀和致密，从而提高了抗压强度，氧化温度和晶化后的强度。随超声波频率的增加，金刚石性能有增加的趋势。     

超细炸药粉体团聚-分散机理研究

通过试验并运用粒子间力的理论对HNS超细微粒团聚—分散机理进行了研究。结果表明：超声分散，表面活性剂包裹以及喷雾干燥可以满足HNS超细微粒分散的要求。     

B2O3/TiO2-ZrO2催化剂上环己酮肟的气相Beckmann重排反应

用共沉淀法制备了TiO2-ZrO2复合氧化物载体，BET，DTA，XRD表征结果表明，该复合载体具有较大的比表面和较好的热稳定性，对于环己酮肟气相Beckmann重排反应制己内酰胺，用复合载体制备的B2O3／TiO2-ZrO2催化剂，比分别以TiO2,ZrO2为载体所制备的B2O3/TiO2和B2O3／ZrO2催化剂具有更高的活性和选择性，实验表明，催化剂表面中等强度的酸位是环己酮肟气相Beckmann重排反应的有效活性中心。     

Finite-difference analysis of dielectric-loaded cavities using thesimultaneous iteration of the power method with the Chebyshevacceleration technique

A numerical procedure using the finite-difference technique, simultaneous iteration based on the power method, and the Chebyshev-polynomial preconditioning is proposed to analyze dielectric-loaded cavities. The merit of this method is that no matrix inversions are invoked and the convergence rate of the power method is greatly accelerated by the preconditioning. The TE, TM, and hybrid modes in axisymmetrical cavities loaded with a rod or ring dielectric resonator are analyzed. For the hybrid modes, an H_r-H_z formulation is proposed. Accurate numerical results are obtained efficiently and no spurious solutions are found by the present method     

Fuzzy estimation of feed-cutting force from current measurement-a case study on intelligent tool wear condition monitoring

It is very important to use a reliable and inexpensive sensor to obtain useful information about manufacturing processing, such as cutting force for monitoring automated machining. In this paper, the feed-cutting force is estimated using inexpensive current sensors installed on the ac servomotor of a computerized numerical control (CNC) turning center, with the results applied to the intelligent tool wear monitoring system. The mathematical model is used to disclose the implicit dependency of feed-cutting force on feed-motor current and feed speed. Afterwards, a neuro-fuzzy network is used to identify the cutting force with current measurement only. This hybrid math-fuzzy approach will reduce the modeling uncertainty and measurement cost. Finally, the estimated cutting force is applied in the tool-wear monitoring process. Successful experiments demonstrate robustness and effectiveness of the suggested method in the wide range of tool-wear monitoring applications.     

加氢裂化工艺辅助操作与管理专家系统的开发与应用

近来，专家系统技术的利用已成火炼油与石油化工专家们感兴趣的问题。本文评述了国外这些领域中专家系统应用的进展概况。同时，对我们开发的专家系统工具ＦＥＸＳ的性能作了简介。详述了工业加氢裂化装置辅助操作与管理专家系统的研制过程和系统配置，讨论了系统开发的经验。最后，评价了该技术在炼油与石油化工业中的应用前景。     

胃动力信息采集与分析系统设计

本文设计了一套提取胃电和胃阻抗信号的胃动力信息采集与分析系统，该系统由采集系统和分析系统两部分构成。前者以单片机（ADuC834）为核心部件，实现了胃电和生物阻抗信号的同步采集和数据传输。后者对提取的阻抗信号和胃电信号运用小波多分辨分析处理，利用小波变换将胃阻抗信号从呼吸和血流信号中分离。系统可以应用于分析功能性消化不良患者胃动力的电过程和机械过程。     

含Zr低合金高强度钢中夹杂物的特性

用电子探针研究了含Zr低合金高强度钢中夹杂物的形貌、大小及分布等特性。结果表明 ,钢样中的夹杂物为圆形 ,呈分散分布 ,其组成系含ZrO2 的复合夹杂物 ,而且MnS依附此复合夹杂物成核和长大。钢中添加少量Zr可明显改善夹杂物形态和分布 ,从而改善钢的强度和韧性