聚乙二醇-400催化合成橙花醚的研究

研究了利用多种相转移催化剂在不同条件下合成橙花醚。结果表明：采用聚乙二醇 ４００（ＰＥＧ ４００）为催化剂，当β 萘酚：溴乙烷：催化剂＝１：１２：００７（摩尔比）、温度为７６℃、反应７ｈ时，产率可高达９８１％。     

基于STM32的嵌入式网络控制器设计

针对目前对终端设备的网络远程控制需求,设计了一种可自适应10/100 Mbit/s网络的嵌入式网络控制器,以实现控制系统中对工业设备、信息家电、移动设备等的远程控制和信息交互。设计了微控制器STM32F107和DP83848以太网PHY芯片的硬件设计方案,详细分析了LwIP嵌入式网络协议栈在STM32F107处理器上的移植过程,以及在μC/OSⅡ实时操作系统上进行网络编程的软件设计过程。实验结果表明,所设计的控制器可以稳定、可靠地实现网络远程控制和信息交互。     

HS－900有机硅密封抗渗防水剂性能的研究

ＨＳ－９００有机硅密封抗渗防水剂是一种新型的有机硅改性硅酸盐防水材料。具有良好的抗渗性能和耐酸碱腐蚀能力。将其涂于低标号混凝土材料上，效果尤其明显。     

邻氟苯甲腈的合成研究

以邻甲苯胺为原料 ,采用四步反应法合成邻氟苯甲腈。 (1)邻甲苯胺经西曼反应合成邻氟甲苯 ,收率 6 5 % ;(2 )邻氟甲苯经氯化、水解得到邻氟苯甲醛 ,以过氧化苯甲酰为氯化引发剂 ,氧化锌为水解催化剂 ,收率 80 % ;(3)邻氟苯甲醛经肟化反应得到邻氟苯甲醛肟 ,收率 87% ;(4)肟用乙酸酐脱水合成出邻氟苯甲腈 ,收率 76 % ,产品质量分数大于 99%。     

焙烧硫酸铁铵催化合成季戊四醇双缩苯甲醛

以硫酸铁铵经600℃高温焙烧制得一类新型固体酸催化剂，该催化剂在合成季戊四醇双缩苯甲醛中具有较高的催化活性，其优化条件是：苯甲醛与季戊四醇物质的量比为2．0：1，催化剂用量为5％(以醇的质量为准)，回流温度83℃，反应时间2．5h，在此优化条件下，反应产率为87％。且催化剂容易制备，可连续使用。     

国外ABS生产技术进展

综述了世界ＡＢＳ树脂的生产及供求，介绍了各种生产工艺的进展，对其技术特点及产品性能进行了比较。     

Preparation of superparamagnetic immunomicrospheres and application for antibody purification

A novel and effective protocol for the preparation of superparamagnetic immunomicrospheres has been developed. First, micro‐size magnetic poly (methacrylate‐divinylbenzene) (PMA‐DVB) spheres were prepared by a modified suspension polymerization method. The oleic acid coated magnetite (Fe₃O₄) nanoparticles made by coprecipitation were mixed with monomers of MA, DVB, and initiator benzoyl peroxide (BPO) to form oil in water emulsion droplets with the presence of poly (vinyl alcohol) (PVA‐1788) as a stabilizer. The polymerization reaction was carried out in a 2‐L beaker equipped with four vertical stainless steel baffleplates by increasing the temperature of the mixture at a controlled rate. The resulting magnetic microspheres are micro‐sized (less than 8μm in diameter) and 80 percent of them are in the size ranging from 1 to 5 μm. Then, they were highly functionalized via ammonolysis reaction with ethylenediamine, and the surface amino‐modified magnetic microspheres were obtained. The morphology and properties of these magnetic microspheres were examined by SEM, TEM, VSM, and FT‐IR. Affinity ligand protein A (ProtA) was covalently immobilized to the amino‐modified magnetic microspheres by the glutaraldehyde method. These ProtA‐immobilized magnetic immunomicrospheres were effective for affinity bioseparation processes, as was demonstrated by the efficient immunoaffinity purification of antibodies IgG2a (22mg per gram of microspheres) from mouse ascites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2205–2211, 2004     

取代基及分子量对非离子型纤维素醚表面特性的影响

根据Washburn的浸渍理论(Penetration Theory)和van Oss-Good- Chaudhury的组合理论(Combining Theory)及应用柱状灯芯技术(Column Wicking Technique),对几种非离子型纤维素醚,如甲基纤维素、羟丙基纤维素和羟丙基甲基纤维素的表面特性进行了测试。由于这些纤维素醚的取代基、取代度和分子量不同,所以它们的表面能及其组成部分有着明显的差异。数据说明,非离子型纤维素醚Lewis碱大于Lewis酸,表面自由能的主要成分是Lifshitz-van der Waals力。羟丙基的表面能及其成分都大于羟甲基。而在相同取代基和取代度的前提下,羟丙基纤维素的表面自由能正比于分子量;而羟丙基甲基纤维素的表面自由能则正比于取代度,反比于分子量。实验还发现非离子型纤维素醚中的取代基羟丙基和羟丙基甲基的表面能似乎都大于纤维素的表面能,而实验证明所测试得出的纤维素的表面能及其成分的数据是与文献所吻合的。     

Foaming and chain extension of completely biodegradable poly(propylene carbonate) using DPT as blowing agent

Completely biodegradable foams of poly(propylene carbonate) (PPC) derived from carbon dioxide and propylene oxide were fabricated using N, N′-dinitroso pentamethylene tetramine (DPT) as chemical blowing agent, and urea as the activator to lower the decomposition temperature of DPT. Thermal decomposition behavior and gas evolution behavior of the DPT composite with various urea to DPT ratios were investigated to optimize the composition of the blowing agent. The formulation of blowing agent mixture and foaming condition, the foam morphologies, the molecular weight change, as well as the mechanical properties of produced PPC foams were studied extensively. The experimental results demonstrated that the greatest blowing ratio of 14.8 can be afforded in case 12 phr blowing agent was used at 170 °C for 30 min. Gel permeation chromatography (GPC) and thermal analysis revealed that DPT acted as both chain-extension agent and blowing agent for PPC matrix. The molecular weight of PPC subjected to foaming increased by 76%. The foamed PPC exhibited superior mechanical properties and can be used as packaging material for many practical applications.     

Rheological study on O−carboxymethylated chitosan/cellulose polyblends from LiCl/N,N‐dimethylacetamide solution

An O?carboxymethylated chitosan (O? CMCh) water solution (I) and N,N‐dimethylacetamide (DMAc) emulsion (II) were blended with a cellulose LiCl/DMAc solution, and corresponding polyblends (Polyblends I and II) were obtained. The rheology of the three fluids, that is, the cellulose solution and Polyblends I and II, was investigated. The cellulose solution was characterized by a power‐law fluid. When an O‐CMCh water solution or DMAc emulsion was added to the cellulose solution, the power‐law curve was preserved. The power‐law indexes (n) of all three fluids increased along with the temperature. Polyblend I displays an n close to but a little higher than that of the cellulose solution, while Polyblend II shows a much higher power index than those of the other two fluids. The values of the apparent viscosity (η_a) for all the three fluids are close and decrease along with an increase in the temperature. Adding O‐CMCh microparticles into Polyblends I and II results in a decrease in the structural viscosity index (Δη) in comparison to that of the cellulose solution, and this effect is very obvious for Polyblend I. A cellulose solution's Δη declines with the augmentation of temperature, while the Δη's of both Polyblends I and II show minimum values at about 323 K. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1719–1725, 2003