含砷氰化尾矿回填利用污染控制技术试验研究

针对某黄金生产企业含砷氰化尾矿污染特征,开展了搅拌洗涤法、臭氧氧化法、酸化溶砷法、铁盐固砷法等多种无害化方法联合处理试验研究,旨在将该含砷氰化尾矿处理至满足氰渣规范回填利用污染控制要求。结果表明：该含砷氰化尾矿回填利用污染控制技术工艺为压滤调浆搅拌洗涤+臭氧氧化+酸化溶砷+铁盐固砷,最佳参数为原矿浆压滤后加水调浆,矿浆浓度40%,臭氧投加量0.66 g/L,酸化溶砷pH值3、曝气量0.1 m³/h、反应时间2 h,铁盐固砷七水合硫酸亚铁投加量20.0 g/L、反应时间1 h。研究结果为该黄金生产企业含砷氰化尾矿回填利用提供了技术支撑。     

缩进式管子-管板焊接工艺

管子-管板焊接是换热器生产的关键工序,通过对缩进式管子-管板焊接技术进行的试验和分析,确定了最佳的焊接参数,供换热器制造厂有关技术人员参考.     

铸件缺陷修补方法

简述了铸件缺陷的谷种修补方法及工艺，指出液膜溶解扩散焊是一种比较先进的焊补方法。     

PZT／Terfenol-D／PVDF层状复合磁电材料谐振特性

采用热压法制备出二层锆钛酸铅(PZT)／聚偏氟乙烯(PVDF)与1层Tb0.28Dy0.72Fe2(Terfenol-D)／PVDF叠层结构的三元复合磁电材料，研究了不同PVDF含量，以及不同层厚比tp／L对样品的介电常数、介电损耗、电阻率、谐振频率以及磁电转换系数αE33，αE31的影响规律，结果显示PVDF的含量和层厚比都存在最佳值(最佳值出现在产0．5，tp／L=2／7)，并且在这个最佳值处，磁电转换系数达到最大。     

The kinetics of desorption in the presence of a gas phase of the desorbing molecule: CO/Re(001)

TPD/Exchange from CO/Re(001) in a gas ambience showed that the absolute rate of desorption depends on the gas pressure and has a first plus second order rate law. It is proposed that desorption is a two step process from the adsorbed state to a stable intermediate which is itself weakly adsorbed.     

硼酚醛树脂在涂料中的应用

通过将硼酚醛树脂和环氧树脂进行混用,利用硼酚醛树脂优异的耐酸、碱腐蚀性能以及耐高温性能和环氧树脂可以常温固化成膜的特点,制备常温固化的耐高温防腐蚀涂料。     

ZnO微／纳米纤维的静电纺丝及其表征

以聚乙烯吡咯烷酮(PVP)为络合剂与醋酸锌[Zn(CH3COO)2]反应制得前驱体溶液,用静电纺丝法制备了PVP／Zn(CH3COO)2纤维,经煅烧得到具有微孔结构的氧化锌(ZnO)微／纳米纤维。对所制备纤维分别采用差热-热重分析、红外光谱分析、X射线衍射分析、扫描电镜等手段进行了表征。结果表明: PVP/Zn(CH3COO)纤维表面光滑,直径约300-700 nm,经700℃煅烧后,可得到ZnO微／纳米纤维。     

PET工程塑料概况

综述了PET工程塑料合金化方面的主要研究开发情况，就PET／PBT、PET／PC、PET／聚酯聚醚、PET／尼龙、PET／PE等合金的研究及应用情况作了简单介绍。     

Association-Based Active Access Control models with balanced scalability and flexibility

In existing Active Access Control (AAC) models, the scalability and flexibility of security policy specification should be well balanced, especially: (1) authorizations to plenty of tasks should be simplified; (2) team workflows should be enabled; (3) fine-grained constraints should be enforced. To address this issue, a family of Association-Based Active Access Control (ABAAC) models is proposed. In the minimal model ABAAC₀, users are assigned to roles while permissions are assigned to task-role associations. In a workflow case, to execute such an association some users assigned to its component role will be allocated. The association's assigned permissions can be performed by them during the task is running in the case. In ABAAC₁, a generalized association is employed to extract common authorizations from multiple associations. In ABAAC₂, a fine-grained separation of duty (SoD) is enforced among associations. In the maximal model ABAAC₃, all these features are integrated, and similar constraints can be specified more concisely. Using a software workflow, case validation is performed. Comparison with a representative association based AAC model and the most scalable AAC model so far indicates that: (1) enough scalability is achieved; (2) without decomposition of a task, different permissions can be authorized to multiple roles in it; (3) separation of more fine-grained duties than roles and tasks can be enforced.     

Preparation and Catalytic Performance of Mesostructured Aluminosilicate Nano-particles with Wormhole-Like Framework Structure

A facile two-step sol–gel method has been developed for the preparation of mesostructured aluminosilicate nano-particles (Si/Al = 7.5) with wormhole-like but uniform pore structures and highly catalytic activities towards bulky hydrocarbon cracking. It is desirable that, as this synthesis takes place in the absence of alkali cations, the mesoporous nano-particulate material is directly obtained in the acid form, making a subsequent ion-exchange and calcination treatment superfluous.