用ANN决定电力系统的切负荷控制

将神经网络用于电力系统切负荷实时稳定控制，分析了神经网络输入量的选取问题，并给出了陕西关中电网切负荷稳定控制的算例。     

基于图象识别的水泥预加水成球闭环控制方法

分析现有参加水成球开环控制系统存在的问题，提出一种基于计算机图象识别的技术的水泥预加水成球闭环控制方法。     

用有限维量子力学解重夸克偶素束缚态能级

用有限维矩阵形式代替无限维薛定格方程，求解重夸克偶素束缚态能级．结果发现当空间量子数Ｊ小时能级与实验值符合较差，在Ｊ大时与实验值符合较好     

基于边界表示的曲面实体造型系统的数据结构

实体造型是ＣＡＤ系统的核心模块，而二次曲面在工程中常用来描述轴，孔及圆角等形状特征。讨论了在微机上实现的一个基于边界表示的实体模型的数据结构，并针对二次曲面的特点，实现了对自封闭曲面的无二义性拓扩定义，为顺利进行曲面的拼合运算打下了基础。     

我国纸包装制品的现状与发展前景分析

随着纸包装制品产量的增加和品种的多样化，纸包装制品的作用和地位已大大提高。“绿色包装”的兴起和食品纸包装化，将使纸包装制品的发展前景更为广阔。     

D-T中子穿透铁球伴生γ射线泄漏能谱实验研究

建立了系列厚度为3、6、11、16、21．8cm的铁球基准装置。用BC-501A谱仪测量了D-T中子穿透铁球伴生γ射线泄漏能谱，能量范围为0．5～5MeV。通过能谱分析，观测到铁球厚度对能谱有一定影响。利用MCNP4A程序和t-2、ENDF／B-V、ENDF／B-Ⅵ和FENDL-2等数据库对实验进行了模拟计算，并将计算结果与实验结果进行了比较。γ射线能谱实验误差为4％～6％。     

教室照明设计的几个问题

本文针对我国中小学学生视力低下率的状况,分析产生的原因,提出对建筑照明设计标准的建议及设计人员在中小学教室照明设计时需要注意的问题.     

The measuring method of early lateral energy fraction in the scale model experiments

This paper introduces a measuring method of early lateral energy fraction in the scale model experiments. According to the interference principle of half wave length making the high frequency figure-8 directional microphone. With the signal-processing technique, a receiving and analyzing system, for the measurements of lateral energy fraction in the scale model is realized.     

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteries

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 ,Zr4 ). The starting materials were mixed with a high-efficient sander and treated thermally under flowing N2. The samples were characterized by X-ray diffraction (XRD), field-emission gun electron microscopy (FEG), and their electrochemical performance was investigated in the term of cycling behavior. Room temperature discharge capacity about 140.6 mA·h·g-1 was obtained at C/5 rate.     

Fabrication of NiO Buffer Layer for YBCO Coated Conductors by Combining Sputtering and SOE Method

In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the potential of the surface oxidation epitaxial (SOE) route for formation a cube textured NiO layer on nickel tapes. The epitaxial NiO functions as a buffer layer of chemical reaction between YBCO and nickel, and as a template for the epitaxial growth of YBCO. However, the surface quality of NiO is difficult to control and defects such as crack, spall and deep grooves exist in SOE NiO layer. A new approach combining sputtering and SOE method to obtain crack-free and cube textured NiO layer were reported. Ni tapes prepared by the combination of rolling and recrystallization were used for this work. A coating of Ni was first deposited on the tapes via magnetron sputtering. Then on the coating tapes, continuous and textured NiO layer were achieved by SOE technology.