Hybrid Well-balanced WENO Schemes with Different Indicators for Shallow Water Equations

In (J. Comput. Phys. 229: 8105–8129, 2010), Li and Qiu investigated the hybrid weighted essentially non-oscillatory (WENO) schemes with different indicators for Euler equations of gas dynamics. In this continuation paper, we extend the method to solve the one- and two-dimensional shallow water equations with source term due to the non-flat bottom topography, with a goal of obtaining the same advantages of the schemes for the Euler equations, such as the saving computational cost, essentially non-oscillatory property for general solution with discontinuities, and the sharp shock transition. Extensive simulations in one- and two-dimensions are provided to illustrate the behavior of this procedure.     

Blockwise conjugate gradient methods for image reconstruction in volumetric CT

Cone beam computed tomography (CBCT) enables volumetric image reconstruction from 2D projection data and plays an important role in image guided radiation therapy (IGRT). Filtered back projection is still the most frequently used algorithm in applications. The algorithm discretizes the scanning process (forward projection) into a system of linear equations, which must then be solved to recover images from measured projection data. The conjugate gradients (CG) algorithm and its variants can be used to solve (possibly regularized) linear systems of equations Ax=b and linear least squares problems minx∥b-Ax∥(2), especially when the matrix A is very large and sparse. Their applications can be found in a general CT context, but in tomography problems (e.g. CBCT reconstruction) they have not widely been used. Hence, CBCT reconstruction using the CG-type algorithm LSQR was implemented and studied in this paper. In CBCT reconstruction, the main computational challenge is that the matrix A usually is very large, and storing it in full requires an amount of memory well beyond the reach of commodity computers. Because of these memory capacity constraints, only a small fraction of the weighting matrix A is typically used, leading to a poor reconstruction. In this paper, to overcome this difficulty, the matrix A is partitioned and stored blockwise, and blockwise matrix-vector multiplications are implemented within LSQR. This implementation allows us to use the full weighting matrix A for CBCT reconstruction without further enhancing computer standards. Tikhonov regularization can also be implemented in this fashion, and can produce significant improvement in the reconstructed images.     

Phase formation and modification of corrosion property of nitrogen implanted Ti-Al-V alloy

In the present investigation, polished samples were implanted with nitrogen ion at an energy of 60 keV and implantation doses were 1×10¹⁶, 5×10¹⁶, 1×10¹⁷ and 6×10¹⁷ ions/cm². Glancing incidence X-ray diffraction was employed on the implanted specimens to understand the phases formed with increasing dose. The valence states of nitrogen, titanium and carbon on the sample surfaces were analyzed by X-ray photoemission spectroscopy. The corrosion resistance was examined by the electrochemical methods in a solution with pH=10 at room temperature in order to determine the optimum dose that can give good corrosion resistance in a simulated nuclear reactor condition. Scanning electron microscopy was used to observe the topographies of nitrogen-implanted Ti-Al-Zr after potentiodynamic measurement. It was found that implanted nitrogen dissolved in titanium matrix with increasing dose and the resultant nitrides such as TiN and Ti₂N precipitated. Implantation of nitrogen ions into the surface of Ti-Al-V alloy improves its corrosion resistance, and the increase of the corrosion resistance depends on the nitrogen dose employed; the maximum improvement of the corrosion resistance was observed at a dose of 1×10¹⁷ N⁺/cm².     

榴弹弹丸质点弹道性能分析与可视化仿真

为提高榴弹设计中的计算分析精度，加快弹种的研发速度，建立了一个弹丸质点弹道模型提出了相应的算法和软件实现；本软件除具有同类软件的计算功能外，还以可视化的形式模拟弹丸在空中的飞行全过程，并生成各种特性曲线，同时具有智能捕捉功能、查询功能。     

Applications of optimal mathematic-physical models in metallurgical manufacture scheduling system at Baosteel

The transfer of mass flow between ironmaking and steelmaking process at Baoshan Iron and Steel Co. Ltd. has been analyzed. The mathematic-physical models of transport scheduling for hot metal manufacturing have been researched combined with the practical problem in the metallurgical manufacture procedure. Taking into account these models, the scheduling software has been designed, programmed and tested on-line. The new automation system of production scheduling has been implemented successfully at Baosteel, which produces a great economic benefit.     

校园网络与防火墙建设

简要介绍了防火墙在校园网络建设中的重要作用,简介了防火墙的种类、工作原理,并对几种防火墙的优缺点进行总结。     

焦化废水中多组分酚的因子分析—岭回归-光度法同时测定

根据3-甲基-2-苯并噻唑腙(MBTH)与酚类发生偶合显色反应而生成有不同颜色的稳定配合物的特点,测定废水中酚类混合体系的吸收光谱,结合因子分析和岭回归技术对工业废水中苯酚、邻甲酚、3,4-二甲酚、2,3-二甲酚、邻苯二酚等多组分酚的光谱数据进行解析,成功的确定了废水中酚的物种数,物种种类及各物种含量.     

二氧化钛直接制取金属钛工艺简介

阐述了各种二氧化钛直接电解制取金属钛的工艺及其原理，指出了熔盐电解TiO2法在工业应用上存在的问题。     

周铣加工表面形貌仿真新算法

考虑主轴偏心，基于周铣过程中刀具切削刃上任意点与工件相对运动的轨迹方程和周铣过程几何特征，构造出可以求解周铣加工表面上任意一点形貌高度值的三维表面形貌仿真算法，并给出了相应的仿真算例。该算法无需对刀齿进行微段离散，并且不依赖于工件网格划分，加工表面上任意一点形貌高度值的计算次数等于刀具齿数，具有通用性好、运算速度快、结果准确度高的特点。