Elastic solutions of a cylindrical rod containing periodically distributed inclusions with axisymmetric eigenstrains

Summary. In this paper, we give the elastic solution for a special type of microstructure – a circular cylindrical rod containing periodically distributed inclusions along its axial direction. Each inclusion has the same uniform axisymmetric transformation strain (eigenstrain). Analytical elastic solutions are obtained for the displacements, stresses and elastic strain energy of the rod. The effects of microstructure and its evolution (growth of inclusions) on the elastic stress and strain fields as well as the strain energy of the rod are quantitatively demonstrated. As a result of such microstructure evolution nominal stress-strain relation with strain softening is derived for a rod under uniaxial tension.     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Effect of heat treatments on tensile properties and microstructures of wrought Mg−Zn−Zr-RE alloys

The effect of heat treatments on the tensile properties and microstructures of wrought Mg–Zn–Zr-Rare earth alloys MB25 and MB26 have been studied in this paper. It was shown that the homogenization of the cast ingots decreased the strength of the extruded bars because some grain boundary phases were dissolved during the process of this treatment, while the ageing treatment of the extruded bars increased the strength due to the dispersive precipitation of MgZn₂ phase. The quenching + ageing treatments of the extruded bars decreases the strength and plasticity because of the growing up of the grains.Abbreviations ED electron diffraction - GB grain boundary - RE rare earth - TEM transmission electron microscope     

Large-scale quantum mechanical simulations of high- Z metals

High-Z metals constitute a particular challenge for large-scale ab initio electronic-structure calculations, as they require high resolution due to the presence of strongly localized states and require many eigenstates to be computed due to the large number of electrons and need to accurately resolve the Fermi surface. Here, we report recent findings on high-Z metals, using an efficient massively parallel planewave implementation on some of the largest computational architectures currently available. We discuss the particular architectures employed and methodological advances required to harness them effectively. We present a pair-correlation function for U, calculated using quantum molecular dynamics, and discuss relaxations of Pu atoms in the vicinity of defects in aged and alloyed Pu. We find that the self-irradiation associated with aging has a negligible effect on the compressibility of Pu relative to other factors such as alloying. The US Goverment’s right to retain a non-exclusive, royalty-free license in and to any copyright is acknowledged.     

First-principles study of the tensile and fracture of the Al/TiN interface

Employing the density functional theory, we investigate the tensile and fracture processes of the Al/TiN(0 0 1) interface. The simulation presents directly the strain–stress relationship, the ideal tensile strength and the process of bond breaking of the system. Through the analysis of deformation, we find that the softer Al layers deform larger than the harder TiN layers during the tensile process. And fracture occurs between the interface and the sub-interface Al layers. In addition, the results show that during the tensile process, the ripple of the interfacial TiN layer decreases gradually with the increment of the strain. Charge transfer was detected from the Al to TiN layers near the interface area during the tensile process by means of charge density and density of states analyses. The charge transfer affects the fracture process. Compared to our previous study of the Al/TiN(1 1 1) interface, the Al/TiN(0 0 1) interface has smaller work of adhesion and larger tensile strength than the Al/TiN(1 1 1) interface. Our investigation shows that the fractures of the Al/TiN(0 0 1) and (1 1 1) interface systems both happen in the Al layers near the interface.     

Intravitreal tolerance of a new perfluorocarbon vitreous replacement, Multifluor APF-144

OBJECTIVE: To evaluate the intravitreal tolerance of a new perfluorocarbon vitreous replacement, Multifluor APF-144 (perfluorotetramethylcyclohexane). DESIGN: Ten New Zealand albino rabbits (one eye from each) underwent vitrectomy. The vitreous was replaced in five eyes with Multifluor APF-144 and in five eyes with saline (control group). OUTCOME MEASURES: Appearance on indirect ophthalmoscopy, electroretinography recordings before and 2, 4 and 8 weeks after vitrectomy, findings on electron and light microscopy at 8 weeks. RESULTS: Endophthalmitis did not develop in any of the eyes. There was no significant change in electroretinography values for the experimental eyes after vitrectomy. No evidence of retinal toxicity was found on light or electron microscopic examination. CONCLUSIONS: Multifluor APF-144 shows promise as a short-term postoperative retinal tamponading agent.     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.     

A behavioral analysis of effective teaching.

Characterizes classroom instruction (CRI) from a behavior analytic perspective. It is argued that effective teaching strategies also serve managerial functions through the development of stimulus control and the management of behavioral choice. The stimulus control properties of CRI are discussed, and research concerning the effects of antecedent events on children's academic performance is reviewed. A theory for predicting choices in behavior, known as matching theory, is presented that evolved out of experimental operant research. The characteristics of CRI that make it particularly suited to matching theory analysis are identified, and research applying matching theory to children's classroom behavior is reviewed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.