Modeling wireless fading channels via stochastic differential equations: identification and estimation based on noisy measurements

This paper is concerned with modeling and identification of wireless channels using noisy measurements. The models employed are governed by stochastic differential equations (SDEs) in state space form, while the identification method is based on the expectation-maximization (EM) algorithm and Kalman filtering. The algorithm is tested against real channel measurements. The results presented include state space models for the channels, estimates of inphase and quadrature components, and estimates of the corresponding Doppler power spectral densities (DPSDs), from sample noisy measurements. Based on the available measurements, it is concluded that state space models of order two are sufficient for wireless flat fading channel characterization.     

Reflectarray research at the communications research centre Canada

It has been a decade since a research program began on reflectarray technology at the Communications Research Centre Canada (CRC). This endeavor has demonstrated the advantages and shortcomings of this technology, the issues that ought to be addressed, and future opportunities. This paper summarizes the outcome of this research in the context of projects that have been carried out, and the resulting insight into reflectarray technology. Design methodology, fabrication process, and measurements results will be briefly discussed for each particular development.     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

Effective factors on synthesis of the hematite–silica red inclusion pigment

The work focuses on the synthesis of a red ceramic pigment by inclusion of hematite in a fumed silica matrix with different specific surface areas. Iron(II) sulfate was used as hematite precursor. Mixtures of iron(II) sulfate and fumed silica with different mole ratios were heated at different temperatures from 1000 to 1300 °C for 4 h.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

10GbE成为主流

数年来，具有10Gbps速度的下一代以太网一直处于即将成为主流的状况。一段时间以来，网络的某些区域已在使用光学技术，并且随着流量的增加，对10GbE数据速率的需求正在增长。但是，需要一种比上一代以太网复杂许多的技术，用于在100m长的铜缆上运行10GbE。这一要求导致了昂贵的MAC（媒体访问控制器）和交换芯片，以及昂贵而又不方便的PHY层接口芯片，由此限制了快速LAN用于那些覆盖数据中心内较短距离的高性能应用。     

Some Thoughts on the Evolution of Work Teams in Organizations

In this time of flat, team-based and technology-enabled organizations the effectiveness of communication and team leadership practices will be more important than ever before. Therefore, we believe that some of the earlier, time-tested classic works on group dynamics and leadership are worthy of re-reading. We are particularly impressed by how relevant one of the oldest classics, Benne and Sheats' (1948) article on functional roles of group members, remains to this day.     

Lattice structure on some fuzzy algebraic systems

In this paper, we study the lattice structure of some fuzzy algebraic systems such as (G-)fuzzy groups, some fuzzy ordered algebras and fuzzy hyperstructures. We prove that under suitable conditions, these structures form a distributive or modular lattice. This research partially is supported by the “ Fuzzy Systems and its Applications Center of Excelence, Shahid Bahonar University of Kerman, Iran”.     

Power management in networked devices

Networks are one of the most significant developments in computing and a hallmark of modern society. However, along with increasing efficiency and productivity, both at home and in the workplace, networks have costs. One cost is the additional energy that electronic devices consume when attached to networks. Power management, a standard feature of modern PCs, was primarily developed to increase battery lifetime in laptop PCs, which historically were not network-connected when using battery power. Today, however, many laptops are connected to a network - typically a Wi-Fi network - as are the majority of desktop computers. Three key drivers of energy use are induced consumption by devices prevented by network connections from entering low-power states, increasing link data rates that inherently consume more energy for the network interfaces, and proliferation of network-connected displays that actively update and display data when no one is present.