The zinc-rich corner of the Zn-Fe-Ni-Si quaternary system at 450 °C

Following up on recent studies of the Zn-rich corners of the Zn-Fe-Ni and Zn-Fe-Si ternary systems, a 450 °C isothermal section of the Zn-Fe-Ni-Si quaternary phase diagram with the Zn composition being fixed at 93 at.% was determined experimentally using optical microscopy, scanning electron microscopy (SEM) coupled with energy dispersive x-ray spectroscopy (EDS), and x-ray diffractometry (XRD). FeSi was found to be in equilibrium with almost all phases in the section, including the T, ζ, Ni-δ, NiSi₂, and FeSi₂ phases, as well as the liquid phase (L). Silicon solubilities in the T, ζ, and Ni-δ phases were rather limited. However, the solubilities of Fe and Zn in the NiSi₂ phase, at 4.5 at.% and 7.2 at.%, respectively, were appreciable. The existence of the (L+NiSi₂+Ni-δ) three-phase equilibrium state apparently prevents other Ni-Si compounds from entering equilibrium with the liquid at 450 °C. No true quaternary compound was found in the study.     

A comparison between the enhanced mass transfer in boundary and pressure driven oscillatory flow

Mass transport in pulsating flow devices using either moving boundaries or oscillating imposed pressure drops are compared with each other by means of a calculation using a simple model. We conclude that there is no difference between the two configurations as long as one is interested only in the power required to move the fluid for the convective mass transport achieved. However, the boundary driven configuration is more efficient if the power is divided by the total mass transport where both the diffusive and convective parts are taken into account, the boundary driven configuration is more efficient. The amplitude of the piston stroke in the pressure driven configuration and the amplitude in the boundary driven case are assumed to be the same, and the inertia of the moving devices themselves are ignored in this calculation.     

辊筒非圆柱形对辊破碎机的破碎原理

传统对辊破碎机最普遍的两个特点是破碎比小和磨损率高，因而，使其不能经常在选矿流程中得到应用，它的很多优点却一直被人们所忽视。本文介绍一种被称为辊筒非圆柱形辊式破碎机（缩写为NCRC破碎机），其目的是克服传统对辊破碎机的以上缺点。NCRC破碎机具有两个交替排列的平面－凸圆面辊筒和平面－凹圆面辊筒组成，这两个奇特的辊筒外形增大了矿粒与辊筒之间的啮角，使得NCRC破碎机的破碎比比传统对辊机大，NCRC破碎机样机试验表明，即使对很硬的矿石也能获得破碎比大于10：1的结果。此外，幅地NCRC破碎机的破碎过程为对辊破碎机和颚式破碎机两种的联合作用，因而这种辊面外形变化的新式辊筒的磨损率得到降低。     

Survival of Salmonella typhimurium on Sterile Ground Chicken Breast Patties After Washing with Salt and Phosphates and During Refrigerated and Frozen Storage

ABSTRACT: This study investigated the effects of 10% (w/v) salt, trisodium phosphate (TSP), sodium tripolyphosphate (STPP), and tetrapotassium pyrophosphate (TKPP) washes on removal of attached Salmonella typhimurium from sterile chicken breast patties, as well as on their injury and survival in a refrigerator for 16 d, in a –20 °C freezer for 10 mo, and after 3 freeze-thaw cycles. S. typhimurium were grown on chicken patties at 20 °C for 20 h, washed, and enumerated by plating on selective and nonselective media. Salt and phosphates washing significantly lowered the survival populations of attached S. typhimurium on patties, but did not cause any significant sublethal injury of attached S. typhimurium , irrespective of storage treatments. The TSP washes showed superior effects of removing and inactivating S. typhimurium compared to other washing treatments.     

Texture Changes During the Ripening of Port Salut Argentino Cheese in 2 Sampling Zones

ABSTRACT: Texture changes during ripening of Port Salut Argentino cheese for different sampling zones were studied. Compression relaxation tests were performed and results were analyzed using both Maxwellian and Peleg's models. Elastic equilibrium modulus obtained from the Maxwellian model decreased from 1.22 to 0.11 10⁴Pa during ripening. The constants derived from Peleg's model, k₁ and k₂, diminished with ripening time from 1.18 to 0.71 min and from 1.27 to 1.12, respectively. Asymptotic equilibrium modulus from Peleg's model decreased from 0.95 to 0.07 10⁴Pa during ripening. Rate parameters derived from a 1st order kinetics applied to both equilibrium moduli showed that the decrease was faster in the external zone (0.0846 d⁻¹) than in the central zone (0.0368 d⁻¹). The correlation between equilibrium moduli, salt concentration, moisture content, and maturation indexes was obtained with a determination coefficient of 0.76.     

Modeling of Calcium Chloride and Pectin Methylesterase Prefreezing Treatments of Strawberries and Jams

ABSTRACT: :
Different calcium chloride (CaCl₂) and pectin methylesterase (PME) prefreezing treatments in a vacuum were used to clarify the most effective prefreezing factors for strawberries and traditional jams. Fractional factorial design and modeling were used. CaCl₂ had the greatest effect on the majority of the 15 studied responses ( p < 0.001). The pretreatment time should be short (about 5 to 10 min), the temperature low (less than 20 °C), the vacuum level high (pressure less than 10 kPa), the CaCl₂ concentration moderate (about 1%) and the dosage of PME comparatively low (about 50 to 100 nkat/g) in order to yield high quality frozen strawberries for jam making.     

Fatigue reliability in welded joints of offshore structures

Metal fatigue in welded joints in offshore structures is considered. Due to the considerable variability of conditions, a probabilistic approach is used. Theoretical studies of various aspects of the fatigue reliability problem in welded joints are presented. These include a study of the Palmgren-Miner rule, a modified linear model on S/N data, the use of the rainflow method of counting, and a closed form expression for the probability of fatigue failure. A probability model is derived as a suggested basis for an approach to fatigue design.     

Constant stretching rate experiments on low density polyethylene

A simple apparatus for elongational test of molten polymers is presented. Its realiability is demonstrated by means of stress growth in constant stretching rate experiments and relaxation test on a low density polyethylene sample.     

A real-time neural system for color constancy

A neural network approach to the problem of color constancy is presented. Various algorithms based on Land's retinex theory are discussed with respect to neurobiological parallels, computational efficiency, and suitability for VLSI implementation. The efficiency of one algorithm is improved by the application of resistive grids and is tested in computer simulations; the simulations make clear the strengths and weaknesses of the algorithm. A novel extension to the algorithm is developed to address its weaknesses. An electronic system that is based on the original algorithm and that operates at video rates was built using subthreshold analog CMOS VLSI resistive grids. The system displays color constancy abilities and qualitatively mimics aspects of human color perception.