Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Features of disinfection kinetics of water containing <Emphasis Type="Italic">Escherichia Coli</Emphasis> in conditions of hydrodynamic cavitation

The paper has investigated the disinfecting effect of hydrodynamic cavitation on the microorganisms of E. coli in water. It has been found that disinfection kinetics depend on the intensity of the hydrodynamic cavitation field, the microbial load, and gas content. We have studied structure and morphology variation of the E. coli bacteria. It has been demonstrated that the antimicrobial effect is achieved owing to the physicochemical effects of the cavitation field, under whose influence there occurs mechanical destruction of cells and chemical disinfection by the radicals of hydroxyl and hydrogen peroxide.     

The collapse of welded aluminium plate girders—an experimental study

Twenty-two tests conducted to study the collapse behaviour of welded aluminium girders are described. The girders are of varying proportions, have transverse or longitudinal web stiffeners and are subjected to different combinations of shear and bending loads. It is observed that, although shear sway mechanisms similar to those for steel girders do develop, the webs of aluminium girders may fracture in the heat affected zones adjacent to the perimeter welds. These fractures develop at some stage during the formation of the collapse mechanism and are the consequence, rather than the cause, of failure. It is shown that the tension field theory, originally developed for steel girders, may overestimate the shear-carrying capacity of aluminium girders and it is concluded that the theory requires some modification before it can be applied with confidence to aluminium girders.     

Central place theory and intercommunity input-output analysis

This paper explores trade hierarchies and interindustry relationships, first in theory, then in the empirical context of a western United States timber economy facing a large reduction in its timber harvest. Principles of central place theory guide construction of a hybrid intercommunity input-output model. A nonsurvey technique for estimating central place trade is developed, and is compared with MRIO methods. The effect of central place dominance on intercommunity multipliers is examined theoretically, as is the nature of feedback linkages in a central place hierarchy. The empirical magnitude of feedback effects is small, and although effects vary in magnitude from community to community, neglect of central place considerations can understate intercommunity sawmill multipliers by as much as 36 percent.     

Treatment of poultry manure wastewater using a rotating biological contactor

A pilot scale, six stage rotating biological contactor was used to evaluate the feasibility of this process for the stabilization of liquid animal manures. Total disc surface area was approx. 16.7 m². Treatment efficiencies were determined at various waste strengths and influent flow rates.With loading rates of 14.7–322 g m⁻² day⁻¹, the average COD reduction was 61%. With loading rates of 4.88-24.4 g m⁻² day⁻¹, the average BOD₅ reduction was 87%. Total nitrogen removal averaged approximately 30% for the entire study. Mixed liquor oxygen uptake rates were generally in excess of 80 mg 1⁻¹ h⁻¹.Clarified effluent was non-odorous and suitable to be reused for manure flushing or spray irrigation. Treatment was not sufficient to permit effluent discharge to surface waters.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

Organochlorine insecticides and PCB'S in sediments of Lake St. Claire (1970 and 1974) and Lake Erie (1971).

Sediments were collected on a grid from Lake St. Clair in 1970 and 1974 and from Lake Erie in 1971 and analysed for organochlorine insecticides and PCBs. Suspended solids were centrifuged from pumped water in the Detroit River in 1974. Residues of DDE, TDE and DDT were highest in sediment from the Western Basin (70.3 ppb) Lake Erie and lowest in sediment from Lake St. Clair (6.6 ppb in 1970 and 2.6 ppb in 1974). The Central and Eastern Basins of Lake Erie contained residues that fell about mid-way between these means. TDE was the predominant component of ΣDDT and was followed by DDE at approximately half this residue. While DDT represented the lowest component in lake sediments, it was the highest component in suspended solids from the Detroit River.HEOD was present in the entire lake system but at only a fraction of the level of ΣDDT. The mean residue in Lake St. Clair was only 0.1 ppb while Lake Erie sediments contained 1–2 ppb. The highest mean residue (3.6 ppb) was in suspended solids in the Detroit River. Other organochlorine insecticides were only occasionally identified.PCB residues in sediment were approximately 3 times higher than the total organochlorine insecticide residue, being highest in the Western Basin (252 ppb) and lowest in Lake St. Clair (19 ppb in 1970 and 10 ppb in 1974). The Detroit River and Central and Eastern Basins of Lake Erie had intermediate residues.Residues in Lake St. Clair indicated a decline in ΣDDT, HEOD, and PCB residues between 1970 and 1974, and this coincided with the restrictions on the materials. A core sample from the Western Basin of Lake Erie indicated that ΣDDT, HEOD and PCB began to accumulate in sediments in 1958, 1953, and 1956, respectively. This appeared to indicate a lag period of 2–5 years after wide-spread use occurred.