Pocket pagers in lots of one CIM

The Fusion program, a method for agile, flexible computer integrated manufacturing (CIM) at Motorola's Paging Products Group, is discussed. Fusion's CIM and automated assembly system can manufacture a wide variety of different products on the same production line. The development of the Fusion program and how it differs from its predecessor, the Bandit program, are described     

Gas-phase modification of rare-earth intermetallic compounds

Recent work concerning the interstitial modification of permanent magnet alloys based on rare-earth iron intermetallic compounds is reviewed. The crystal structure of the new materials is discussed, then the thermodynamic and statistical aspects of the low-temperature interstitial modification process are considered. Finally, reaction kinetics and thermal stability of the new compounds are discussed and future prospects assessed.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.     

A portable cryo-storage system for low-temperature scanning electron microscopy,suitable for international transport of cryo-specimens

A cryo-specimen storage system for low-temperature scanning electron microscopy (LTSEM) specimens is described, which: liberates multi-specimen experiments from sampling restrictions imposed by the rate at which LTSEM specimens can be examined in the SEM; provides security against experiment loss resulting from breakdown of the SEM or cryo-system; enables collection of specimens in the field or in laboratories remote from the SEM laboratory; and facilitates international air transport of LTSEM specimens. The components of the system, which has a capacity of 98 stub-mounted specimens, are readily made in a laboratory workshop. The details of the design may be altered to suit particular specimen types or experimental approaches.     

A simple and effective precoding scheme for noise whitening onintersymbol interference channels

A precoding scheme for noise whitening on intersymbol interference (ISI) channels is presented. This scheme is compatible with trellis-coded modulation and, unlike Tomlinson precoding, allows constellation shaping. It can be used with almost any shaping scheme, including the optimal SVQ shaping, as opposed to trellis precoding, which can only be used with trellis shaping. The implementation complexity of this scheme is minimal-only three times that of the noise prediction filter, hence effective noise whitening can be achieved by using a high-order predictor     

Influence of doping on the electronic structure of (La,Sr)2CuO4

High-statistics (>4 × 10⁸ counts), room-temperature measurements of the electron-positron momentum density of La_2?x Sr _x CuO₄ have been performed for samples with Sr concentrations of x=0.0, 0.1, 0.13, and 0.2. These spectra have been analyzed in conjunction with theoretical calculations of the electron-positron momentum density. The metallic samples show features consistent with the presence of a Fermi surface, but its evolution with increasing Sr concentration does not follow the predictions of band theory. These results may indicate the effects of electron-electron correlation on the electron momentum distribution in the Cu-O plane.     

The domain composition method applied to Poisson's equation in two dimensions

Domain composition, a recently described method for formulating continuum field problems, removes certain restrictions on the construction of finite element models such that it is possible to solve a finite element problem without using a global compatible mesh. The domain composition method couples or otherwise constrains meshes in local regions to obtain a solution equivalent to that produced by conventional finite element methods. In particular, the domain composition method enables finite element models to be formulated with overlapping elements. Several advantages come from this, including an ability to automatically generate a finite element model from a solid geometric model, an ability to use a variety of element types in a single finite element model and an ability to exactly match element boundaries to the local geometry. This paper shows in detail a finite element formulation of Poisson's equation using domain composition and presents certain key algorithms that incorporate the domain composition method into well-established finite element procedures.     

Abnormal behavioral responses to fenfluramine in patients with affective and personality disorders. Correlation with increased serotonergic responsivity

Serotonergic responsivity was assessed in 20 psychiatric patients by the prolactin response to a fenfluramine challenge test. During the fenfluramine challenge 6 of 20 patients (30%) spontaneously reported psychopathologic reactions that included: increased anxiety/agitation, psychotic symptoms, illusions, mood elevation, and anergia. The time of peak behavioral symptoms (2.5 +/- 0.8 hrs) corresponded closely to the time of peak increase in prolactin levels (3.0 +/- 1.1 hr). Abnormal behavioral responders had statistically significant greater increases in prolactin 1 to 4 hr after fenfluramine when compared to normal responders. Patients who developed an abnormal psychopathologic response to fenfluramine were characterized by higher levels of anxiety and agitation at the time of admission to the hospital but otherwise were not distinguishable on the basis of severity of other psychiatric symptoms. This study suggests that increased serotonergic transmission may trigger anxiety, psychosis, and mood elevation in specific vulnerable individuals, whereas other patients with similar psychiatric illnesses are not affected.     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

Electrical coupling and impulse propagation in anatomically modeledventricular tissue

Computer simulations were used to study the role of resistive couplings on flat-wave action potential propagation through a thin sheet of ventricular tissue. Unlike simulations using continuous or periodic structures, this unique electrical model includes random size cells with random spaced longitudinal and lateral connections to simulate the physiologic structure of the tissue. The resolution of the electrical model is ten microns, thus providing a simulated view at the subcellular level. Flat-wave longitudinal propagation was evaluated with an electrical circuit of over 140,000 circuit elements, modeling a 0.25 mm by 5.0 mm sheet of tissue. An electrical circuit of over 84,000 circuit elements, modeling a 0.5 mm by 1.5 mm sheet was used to study flat-wave transverse propagation. Under normal cellular coupling conditions, at the macrostructure level, electrical conduction through the simulated sheets appeared continuous and directional differences in conduction velocity, action potential amplitude and V˙_max were observed. However, at the subcellular level (10 μm) unequal action potential delays were measured at the longitudinal and lateral gap junctions and irregular wave-shapes were observed in the propagating signal. Furthermore, when the modeled tissue was homogeneously uncoupled at the gap junctions conduction velocities decreased as the action potential delay between modeled cells increased. The variability in the measured action potential was most significant in areas with fewer lateral gap junctions, i.e., lateral gap junctions between fibers were separated by a distance of 100 μm or more