Effect of the structure of weld metal on the pitting susceptibility of welded joints of ferritic-austenitic steel

The structure of welded joints of tubes from ferritic-austenitic steel 02Kh22N5AM3 is studied by methods of metallographic, x-ray diffraction, and electron microscopic analyses. Corrosion properties of welded joints are determined in pitting tests. The results of the study are used for developing a mode of welding and heat treatment that increases substantially the corrosion resistance of the weld metal. __________ Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 32–35, July, 2006.     

Formation of glass synthesized by sol-gel technology

The process of glass synthesis by the sol-gel method is studied using analysis of EPR spectra. The gelation process and formation of xerogels are considered depending on the temperature-time parameters and the type of initial components. It is established that the glass phase starts to be formed at 800°C. __________ Translated from Steklo i Keramika, No. 8, pp. 9–13, August, 2006.     

Creating advanced functions on network processors: experience and perspectives

In this article we present five case studies of advanced networking functions that detail how a network processor (NP) can provide high performance and also the necessary flexibility compared with ASIC. We first review the basic NP system architectures, and describe the IBM PowerNP architecture from the data plane as well as the control plane point of view. We introduce models for the programmer's views of NP that facilitate a global understanding of NP software programming. Then, for each case study, we present results from prototypes as well as general considerations that apply to a wider range of system architectures. Specifically, we investigate the suitability of NP for QoS (active queue management and traffic engineering), header processing (GPRS tunneling protocol), intelligent forwarding (load balancing without flow disruption), payload processing (code interpretation and just-in-time compilation in active networks), and protocol stack termination (SCTP). Finally, we summarize the key features as revealed by each case study, and conclude with remarks on the future of NP.     

High-performance surface-micromachined inchworm actuator

This work demonstrates a polycrystalline silicon surface-micromachined inchworm actuator that exhibits high-performance characteristics such as large force (/spl plusmn/0.5 millinewtons), large velocity range (0 to /spl plusmn/4.4 mm/sec), large displacement range (/spl plusmn/100 microns), small step size (/spl plusmn/10, /spl plusmn/40 or /spl plusmn/100 nanometers), low power consumption (nanojoules per cycle), continuous bidirectional operation and relatively small area (600 /spl times/ 200/spl mu/m/sup 2/). An in situ load spring calibrated on a logarithmic scale from micronewtons to millinewtons, optical microscopy and Michelson interferometry are used to characterize its performance. The actuator consists of a force-amplifying plate that spans two voltage-controlled clamps, and walking is achieved by appropriately sequencing signals to these three components. In the clamps, normal force is borne by equipotential rubbing counterfaces, enabling friction to be measured against load. Using different monolayer coatings, we show that the static coefficient of friction can be changed from 0.14 to 1.04, and that it is load-independent over a broad range. We further find that the static coefficient of friction does not accurately predict the force generated by the actuator and attribute this to nanometer-scale presliding tangential deflections.     

The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with Portland cement

Sulfoaluminate-belite (SAB) cements are an attractive class of low-energy cements from the viewpoint of saving energy and releasing less CO₂ into the atmosphere during their production. Their hydraulic activity, however, does not match that of the ordinary Portland cement (PC) and needs improvement before they can be used on their own. However, SAB cements when blended with PC have the potential to be used effectively in traditional applications as shown by this study. Mortars made with blends of SAB cements and PC, and a cement-to-sand ratio of 1:3 by weight and a water-to-cement ratio of 0.5, indicate a superior protection against corrosion of steel to those made with blends of PC and blast-furnace slag (BFSPC). The prepared mortars were stored at 20 °C for 90 days under either a 60% relative humidity (RH)-dry air, or 100% RH-wet air conditions. With further improvement in the SAB cement quality through better understanding of their characteristics, a genuine competition between SAB/PC and BFSPC can be expected in practice.     

Effect of irradiation with low-energy Ar ions on the characteristics of the working and rear sides of single-crystal GaAs substrate

Contactless methods were used to study the characteristics of the front and rear sides of single-crystal GaAs wafers whose rear side was irradiated with low-energy Ar ions. Variations in the optical and photoelectric properties of irradiated and unirradiated sides were detected. A solitonic mechanism for the penetration of defects into the crystal bulk is suggested.     

Performance failure analysis of EDFA cascades in optical DWDM packet-switched networks

A simple and comprehensive technique to determine the probability that a cascade of erbium-doped fiber amplifiers (EDFAs) may be driven into unacceptable regimes of bit error rate (BER) and/or gain levels is presented. This technique allows network designers to determine the tolerances by which the signal power levels may deviate from their predesigned average values and still give acceptable gain variances and BERs at the receiver. We show that even in the signal power range well above the receiver sensitivities (-38 dBm/ch) where the gain spread is not significant, the corresponding spread in BER due to random arrival of packets might result in unacceptable performance. We show for typical levels of operation, the BER temporarily (for about 3 /spl mu/s) deviates to below 10/sup -9/ (10/sup -15/) with a probability of 10/sup -3/ (10/sup -2/), for 100 (64) channels. We show that the gain spread for a single EDFA can be negligible for a range of signal and pump powers at a given average gain.