Generating topological structures for surface models

Rapid prototyping has imposed new requirements on the processing of CAD models. To manufacture an object directly, the model must correspond to a real object and thus represent a closed volume. Its boundary must be continuous and closed, and no cracks or improper intersections are allowed. CAD models cannot always meet these requirements, especially when they are constructed by a surface modeler. The algorithm discussed analyzes surface models and generates a topological structure for them that meets rapid prototyping requirements for a closed volume with a continuous, closed boundary     

采集系统中存储技术的研究

随着光纤技术在嵌入式领域中的应用,通信数据量不断增加,高速采集网络上的数据并正确地存储到磁盘上已成为整个系统的瓶颈。本文从系统基本功能模块出发结合生产者/消费者(Producer-Consumer)模型,对多线程并发、直接读写扇区、异步I/O等技术在系统中的应用进行分析;对系统模型进行抽象,用数学方法对系统进行可行性分析。实验表明,数据采集系统中采用多线程多缓冲的方式在性能上有一定的提高。     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

浅析Cookies认证机制及其安全性

Web服务器生成Cookies并作为文本存贮于用户计算机硬盘或内存中,是实现Web应用认证的主要手段。本文分析了Cookie认证机制的实现过程与特点,并且论述了该认证机制易遭受的安全威胁以及安全需求,并给出实现安全Cookie认证的方法与措施。     

塑性加工方法在粉末高温合金中的探索研究

采用塑性加工方法,本文初步探索了预变形对PREP高温合金粉末及热等静压后合金显微组织的影响.结果表明,粉末预变形可以促进热处理后粉末组织的均匀化,并可降低合金的再结晶温度,改善合金组织,消除部分枝晶,对提高粉末的利用率及降低粉末高温合金盘件的成本具有较大的实际意义.     

超声波检测混凝土结构抗冻性的方法研究

依据固体结构动弹模与表面波速度的关系，采用超声波检测混凝土冻融试件的动弹模，并与共振法测出的动弹模进行对比，总结出其内在相关规律，建立起预报混凝土动弹模的回归主程，由测得的波速计算出相应的动弹模，再利用动弹模之比评估出混凝土结构的抗冻性。初步试验和研究表明，此方法研究思路切实可行，符合混凝土冻融特性的基本变化规律，能够实现从度件测试向结构检测的发展，可供混凝土耐久性检测工程参考。     

温度梯度机理下激光参数对激光成形的影响

以纯铝板和低碳钢板为主要研究对象，对温度梯度机理下激光输入功率、扫描速度、离焦量以及扫描次数等参数与成形弯曲角之间的关系进行了试验研究，深入分析了温度梯度机理下影响成形的主要因素。     

Remanufacturability and Assessment Method

WITH the development of surface engineering andlaws on environment protect,lots of companies have toconsider reclaim of the used products.In practice,theyrealized if the products adopt design forremanufacturing,the benefit of remanufacturing wouldbe increased obviously'1'.Some researcher haveentered into remanufacturability field and built relativeevaluating methods'2'.Based on researching resultabout design for remanufacturing,some concepts,remanufacturability system and assessment method ar…     

工业项目的海绵城市建设标准与技术要点

工业用地是城市建设用地的主要类型之一,是海绵城市建设的重要区域。通过梳理工业项目硬化面积高、径流污染程度高等特征,针对性提出其海绵城市建设的实施路径、建设标准和技术应用等实施建议。工业项目的海绵城市设计应遵循因地制宜的原则,应合理布局绿地并建设海绵设施,通过精细化的标高设计进行径流组织设计;对于降雨径流污染严重的三类工业项目,其海绵措施应以雨水调蓄池(应急事故池)为主,严禁设置具有渗透功能的源头控制设施。对于三类工业项目,海绵城市所提出的年径流总量控制率的目标与事故池的环保要求基本一致,建议相关部门在制定(修订)的应急事故池设计标准时,其中的径流污染控制体积可与对应区域年径流总量控制率标准协同一致。