Prediction and quality control of the melt index during production of high-density polyethylene

In polyolefin processes the melt index (MI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MI, a lot of MI estimation and correlation methods have been proposed. In this work a new dynamic MI estimation scheme is developed based on system identification techniques. The empirical MI estimation equation proposed in the present study is derived from the 1 ^st -order dynamic models. Effectiveness of the present estimation scheme was illustrated by numerical simulations based on plant operation data including grade change operations in high density polyethylene (HDPE) processes. From the comparisons with other estimation methods it was found that the proposed estimation scheme showed better performance in MI predictions. The virtual sensor model developed based on the estimation scheme was combined with the virtual on-line analyzer (VOA) to give a quality control system to be implemented in the actual HDPE plant. From the application of the present control system, significant reduction of transition time and the amount of off-spec during grade changes was achieved     

Contributions of Metaknowledge to Retrieval of Natural Categories in Semantic Memory.

Retrieving the answer to a general knowledge question has been shown to involve two metacognitive processes--a feeling-of-knowing that initiates the search of long-term memory and a willingness to continue searching until an answer can be confidently stated. To extend this model, college students were asked to retrieve as many members of 2 natural categories as they could in 1 min. Examination of the points at which they switched categories revealed that they searched longer in categories of higher potency, and they switched earlier when the other category was of higher potency. They also searched the first category longer when they were allowed to switch only once during a trial rather than as often as they wished. It was concluded that feeling-of-knowing maintained search of a category and also contributed to the willingness to continue searching, and the constraint on switching impacted the willingness to continue. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

Use and Disuse of Contextual Primes in Dynamic News Environments

This study reexamines the news priming effects of the 1991 Persian Gulf War. Suggesting an alternative approach to those used in previous studies, this study assesses individuals' use and disuse of a contextual prime (i.e., the air war) in dynamic news environments. With a short-term, quasi-experimental approach considering the air war as a prime stimulus, a path analysis suggests robust evidence of the short-term accessibility effects of priming. More importantly, as suggested in Martin's (1986) set/reset model, this study extends priming effects beyond the simple hydraulic patterns of accessibility effects. It reveals that both attitudes toward military action and attitudes toward a diplomatic solution were used in subsequent judgments of the president's job performance and handling of the war. The associations between attitudes toward a diplomatic solution and subsequent judgments were even stronger than those between attitudes toward military action and the same subsequent judgments, despite the clear prowar primes of news discourse in the air-war context. This pattern was more greatly intensified among those in the high news attention group than those in the low news attention group     

The effects of a monetary alternative on marijuana self-administration

We have used a variety of methods to characterize the genome of the archaeon Methanosarcina thermophila TM-1. Pulsed-field gel analysis indicates a genome size of 2.8 Mb. We have constructed a bacterial artificial chromosome (BAC) library of M. thermophila and have used it to generate physical maps for this organism. The library is made up of 384 clones with an average insert size of 58 kb representing 8.0 genome equivalents. The utility of the library for low-resolution physical mapping was shown by identifying NotI linking clones and using these to order the NotI macrorestriction fragments of M. thermophila into a 2.8 Mb map. Hybridization of nine single copy genes and a 16S rRNA sequence to these macrorestriction fragments forms the basis for the first genetic map in this organism. High-resolution physical maps, consisting of overlapping clones, have been created using HindIII fingerprints of BAC clones. In this way, we identified a minimal path of five clones that span a 270 kb NotI fragment. The ease of manipulating BAC clones makes the BAC system an excellent choice for the construction of low-resolution and high-resolution physical and genetic maps of archaeal genomes. It also provides a substrate for future genome-sequencing efforts.     

Infinite-dimensional convex optimization in optimal and robustcontrol theory

Many engineering problems can be shown to be equivalent to solving semidefinite programs (SPs), i.e., convex optimization problems involving linear matrix inequalities (LMIs). Powerful computation tools are available for such problems in the finite-dimensional case. However, the problems arising in optimal and robust control theory are often infinite dimensional, and so adequate computation tools are not available. The key to tackling such problems with finite computation tools is to have a primal-dual formulation of the problem without duality gap. In this paper we study infinite-dimensional SPs and present a lifting technique to recast SPs as parameterized linear programs (LPs). This enables the wealth of theoretical tools available for infinite-dimensional LPs to be extended to infinite-dimensional SPs. In particular, we develop some new sufficient conditions for the lack of a duality gap for infinite-dimensional SPs and give an exact characterization of the primal and dual problems for these cases. Both primal and dual problems are formed as infinite-dimensional SP problems, with finite truncations to each giving upper and lower bounds, respectively, on the exact solution to the infinite-dimensional problem. Thus, these results can form the basis of practical computation schemes for infinite-dimensional problems, which require only finite-dimensional computation tools. To illustrate the power of these tools we apply the results to two previously unsolved optimization problems, namely minimizing the l₁ norm of a closed-loop system subject to bounds on the frequency response magnitude at a finite number of points and/or bounds on the H₂ norm     

Conformational disease

Several diverse disorders, including the prevalent dementias and encephalopathies, are now believed to arise from the same general disease mechanism. In each, there is abnormal unfolding and then aggregation of an underlying protein. The gradual accumulation of these aggregates and the acceleration of their formation by stress explain the characteristic late or episodic onset of the clinical disease. The understanding of these processes at the molecular level is opening prospects of more rational approaches to investigation and therapy.     

Amplified primer extension assay for psoralen photoproducts provides a sensitive assay for a (CG)6TA(CG)2(TG)8 Z-DNA torsionally tuned probe: preferential psoralen photobinding to one strand of a B-Z junction

An amplified primer extension assay has been developed for quantitatively mapping the sites of psoralen photoaddition to DNA. This assay was applied to a torsionally tuned Z-DNA-probe that was specifically designed for the primer extension assay. The torsionally tuned Z-DNA forming sequence, (CG)6TA(CG)2(TG)8, forms Z-DNA in vitro at negative superhelical density: sigma = -0.05. The internal 5'-TA dinucleotide was reactive to psoralen when it existed as B-DNA. Upon the formation of Z-DNA, the internal 5'-TA no longer photobound psoralen. The torsionally tuned sequence was synthesized as an EcoRI fragment such that, when Z-DNA formed, the central 5'-AATT of the EcoRI sites was part of the B-Z junctions. The 5'-AATT sequence was not reactive with psoralen when it existed as B-DNA. When the 5'-AATT sequence existed as a B-Z junction, one strand of each junction became hyperreactive to psoralen. The TT directly 5' to the B-DNA-Z-DNA junction photobound psoralen in a strand-specific fashion. Quantitation of the relative rate of psoralen photobinding to the internal 5'-TA and the 5'-AATT at the B-Z junctions provides relationships that are characteristic of the level of supercoiling in DNA.     

Toward global advancement of medicine: the International Society of Nephrology experience

BACKGROUND: Since its foundation in 1960, the International Society of Nephrology (ISN) has pursued the worldwide advancement of education, science and patient care in nephrology. This goal was achieved by means of the Society's journal and the organization of international congresses and symposia. In order to better reach its colleagues and patients in economically less developed countries, the ISN expanded its activities as of 1980 by a large number of specific programs aimed at these regions. METHODS: The first phase of activities included teaching programs, fellowship and visiting scholar programs, and the provision of travel grants to enhance accessibility to the ISN congresses. A second phase consisted of the creation of a library enhancement program, a commission on acute renal failure and--to improve the organization and efficiency--a central commission on global advancement of nephrology (COMGAN). Currently, a third phase has been entered in which all activities have been intensified: (1) under the guidance of COMGAN, supported by a large number of teaching programs and fact finding missions; (2) by establishing a renal sister program; and (3) by initiating commissions on informatics and on clinical trials. RESULTS: As a result, the ISN has reached most parts of the world, previously deprived of contact with renal science and renal patient care. The fellowship program now counts 160 fellows, who spend one or two years in training. The library enhancement program reaches 218 institutions worldwide. ISN membership has soared over the past two years with over 2,500 new members, mostly in the developing countries. They receive Kidney International and other relevant forms of information. Thus far, 135 pairs of renal units in developing and developed countries have been linked for support on a more continuous basis. ISN-sponsored congresses, symposia, and courses are being held in increasing numbers in the developing world. In many of its activities, the ISN closely collaborates with sister organizations, which also contribute financially. In total, the ISN spends annually over $1 million US from its own budget on the programs described above. CONCLUSION: The various programs and initiatives are proving helpful in advancing renal medicine in areas in need. Expansion into supporting similar programs within other medical subspecialties is being explored.     

Crack growth and residual strength characteristics of two grades of glass-reinforced aluminium ‘Glare’

Crack growth and residual strength tests have been conducted on both Glare 3 and Glare 4 material. Results have been compared with those for 2024-T3 monolithic aluminium alloy showing improvements in fatigue life of up to 100 times and improvements in residual strengths of up to 40%. The potential weight savings and general structural performance improvements of the Glare material make it most attractive for future aerospace vehicle design, despite its current higher manufacturing costs.