Dynamic modeling of a dual active bridge DC to DC converter with average current control and load‐current feed‐forward

Bidirectional power flow is needed in many power conversion systems like energy storage systems, regeneration systems, power converters for improvement of the power quality and some DC‐DC applications where bidirectional high power conversion and galvanic isolation are required. The dual active bridge (DAB) is an isolated, high voltage ratio DC‐DC converter suitable for high power density and high power applications, being a key interface between renewable energy sources and energy storage devices. This paper is focused on the modeling and control design of a DC‐DC system with battery storage based on a DAB converter with average current mode control of the output current and output voltage control. The dynamic response of the output voltage to load steps is improved by means of an additional load‐current feed‐forward control loop. An analytical study of the load‐current feed‐forward is presented and validated by means of both simulations and experimental results. Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐minimum phase switched systems: HOSM‐based fault detection and fault identification via Volterra integral equation

In this paper, the problem of continuous and discrete state estimation for a class of linear switched systems with additive faults is studied. The class of systems under study can contain non‐minimum phase zeroes in some of their ‘operating modes’. The conditions for exact reconstruction of the discrete state are given using structural properties of the switched system. The state space is decomposed into the strongly observable part, the non‐strongly observable part, and the unobservable part, to analyze the effect of the unknown inputs. State observers based on high‐order sliding mode to exactly estimate the strongly observable part and Luenberger‐like observers to estimate the remaining parts are proposed. For the case when the exact estimation of the state cannot be achieved, the ultimate bounds on the estimation errors are provided. The proposed strategy includes a high‐order sliding‐mode‐based fault detection and a fault identification scheme via the solution of a Volterra integral equation. The feasibility of the proposed method is illustrated by simulations. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly Stretchable and Sensitive Strain Sensors Using Fragmentized Graphene Foam

Stretchable electronics have recently been extensively investigated for the development of highly advanced human‐interactive devices. Here, a highly stretchable and sensitive strain sensor is fabricated based on the composite of fragmentized graphene foam (FGF) and polydimethylsiloxane (PDMS). A graphene foam (GF) is disintegrated into 200–300 μm sized fragments while maintaining its 3D structure by using a vortex mixer, forming a percolation network of the FGFs. The strain sensor shows high sensitivity with a gauge factor of 15 to 29, which is much higher compared to the GF/PDMS strain sensor with a gauge factor of 2.2. It is attributed to the great change in the contact resistance between FGFs over the large contact area, when stretched. In addition to the high sensitivity, the FGF/PDMS strain sensor exhibits high stretchability over 70% and high durability over 10 000 stretching‐releasing cycles. When the sensor is attached to the human body, it functions as a health‐monitoring device by detecting various human motions such as the bending of elbows and fingers in addition to the pulse of radial artery. Finally, by using the FGF, PDMS, and μ‐LEDs, a stretchable touch sensor array is fabricated, thus demonstrating its potential application as an artificial skin.     

Tuning the pH-responsiveness capability of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel: Design,swelling, and rust removal evaluation

The swelling behavior of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel as well as its ability for iron and copper rust removal was studied and established for the first time. Through an experimental design, the influence of the synthesis parameters on hydrogel response was determined. It was found that pH-responsiveness dependence of hydrogel determines its application. In alkaline media, the hydrogel acted as superabsorbent, while in acidic, the most outstanding property was its pickling capability that allowed to clean carbon steel and copper metallic surfaces. Infrared, thermogravimetry, and scanning electron microscopy were performed to determine copolymer formation, thermal properties, and morphology. Metallic crystallographic phases formed during the corrosion processes were determined by X-ray diffractometer. Hydrogel adhesiveness followed by diffusion and dissolution of metal oxides species was identified as the main steps in the rust removal mechanism. This method offers a new, environmentally friendly perspective to eliminate corrosion from metallic surfaces compared with traditional strategies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48403.     

Neurogenic Interventions for Fear Memory via Modulation of the Hippocampal Function and Neural Circuits

Fear memory helps animals and humans avoid harm from certain stimuli and coordinate adaptive behavior. However, excessive consolidation of fear memory, caused by the dysfunction of cellular mechanisms and neural circuits in the brain, is responsible for post-traumatic stress disorder and anxiety-related disorders. Dysregulation of specific brain regions and neural circuits, particularly the hippocampus, amygdala, and medial prefrontal cortex, have been demonstrated in patients with these disorders. These regions are involved in learning, memory, consolidation, and extinction. These are also the brain regions where new neurons are generated and are crucial for memory formation and integration. Therefore, these three brain regions and neural circuits have contributed greatly to studies on neural plasticity and structural remodeling in patients with psychiatric disorders. In this review, we provide an understanding of fear memory and its underlying cellular mechanisms and describe how neural circuits are involved in fear memory. Additionally, we discuss therapeutic interventions for these disorders based on their proneurogenic efficacy and the neural circuits involved in fear memory.     

Dispersant‐free dyeing of poly(lactic acid) fabric with temporarily solubilised disperse dyes from azopyridone derivatives

Poly(lactic acid) fibre is derived from annually renewable crops and known to be 100% compostable. In order to extend its environmental friendliness into the dyeing process, dispersant‐free dyeing of poly(lactic acid) fabric with three temporarily solubilised azo disperse dyes based on hydroxypyridone moiety containing a β‐sulphatoethylsulphonyl group was investigated. The dyes were successfully applied to poly(lactic acid) fabric without the use of dispersants. The colour yields of the dyes on poly(lactic acid) fabric were observed to be dependent on dyebath pH and dyeing temperature. The optimum results were obtained at pH 4–5 and 110 °C. One of the dyes showed a colour yield as good as that of a commercial disperse dye and good build‐up on poly(lactic acid) fabric. All of the dyes could be alkali cleared owing to ionisation of the dye under mild alkaline conditions. Wash fastness was good to very good, and light fastness was good. The chemical oxygen demand levels of the poly(lactic acid) dyeing effluent from the dyes were considerably lower than those from a commercial disperse dye.     

Ontology based E-learning framework: A personalized,adaptive and context aware model

Multimedia Tools and Applications - Enhancing the degree of learner productivity, one of the major challenges in E-Learning systems, may be catered through effective personalization, adaptivity and...     

Ion-induced desorption of surface contaminants

We report measurements of mean desorption areas per incident ion for hydrocarbon contaminated surfaces of different solids bombarded with 30 keV H₂⁺, O⁺₂, and Ar⁺ and 15 keV O⁺ ions. The results for heavy ions are consistent with a momentum transfer mechanism for desorption. A molecular effect is observed for O₂⁺ ions which desorb significantly more than two separate O⁺ of the same velocity. Our results for hydrogen ions; together with results of other workers for low-energy light ions, lead us to the conclusion that desorption occurs efficiently in inelastic collisions.