RaCH: A New Radial Cluster Head Selection Algorithm for Wireless Sensor Networks

Wireless Personal Communications - This paper presents a radial cluster heads selection mechanism for homogenous wireless sensor networks. It aims to ensure a good load balancing and enhance the...     

Electrocardiogram Signal Denoising Using Discrete Wavelet Transform

The most common noises in ECG （electrocardiogram） signal processing are BW （baseline wandering） and the 50 or 60 Hz PLI （power line interferences）. In order to remove these two major source of noises, we have used the recent powerful DWT （discrete wavelet transform） signal processing in ECG signals which are obtained from MIT-BIH Arrhythmia Database. The results indicate that DWT is a good method for filtering noises without changing the morphology of ECG, and can be applied to all types of ECG signals, whether normal or presenting arrhythmias.     

A vibrational study of phase transitions in Fe2P2O7 and Cr2P2O7 under high‐pressures

The vibrational properties of synthetic iron diphosphate (Fe₂P₂O₇) and chromium diphosphate (Cr₂P₂O₇) are studied under high‐pressure conditions between ~22 and ~30 GPa, respectively. Each compound's structural response to pressure and pressure‐induced phase transitions are characterized. The chromium‐bearing sample shows coalescence of infrared bands occurring near 6 and 17 GPa: these may be associated with increases in the local symmetry of the P₂O₇ group. The iron sample undergoes a first‐order phase transition near ~9 GPa, and a possible phase transition near 5.5 GPa. At 9 GPa, the initially single, strong symmetric PO₄ stretching mode splits into four modes, and the sole asymmetric PO₄ stretching mode splits into two bands. These changes indicate the presence of multiple tetrahedral environments within a larger volume unit cell, and the relative frequencies of the split vibrations indicate a P₂O₇ environment with a markedly narrowed P–O–P angle. The difference between the behavior of the iron and chromium compounds is probably generated by the smaller iron ion producing a discontinuous decrease in the P–O–P angle at lower pressures than in the analogous chromium compound. Our results demonstrate that the dimerized P₂O₇ group remains stable under compression to over 20‐30 GPa at 300 K.     

I Saw You in the News: Mediated and Direct Intergroup Contact Improve Outgroup Attitudes

This study extends the boundary conditions of mediated contact theory by (a) differentiating between mediated contact quantity and quality, (b) examining whether mediated contact exerts effects above and beyond direct contact, and (c) offering causal and generalizable evidence on the effects of exposure to numerous individual outgroup members in news media. We match individual‐level data from a representative panel survey with data on the amount of coverage about members from two outgroups and with the results from validated sentiment analysis. Mediated contact, and especially its quantity, improved outgroup attitudes independently of direct contact. These findings emerged for both outgroups and across two outcome measures.     

Open consensus

This paper presents the abstraction of open consensus and argues for its use as an effective component for building reliable agreement protocols in practical asynchronous systems where processes and links can crash and recover. The specification of open consensus has a decoupled, on‐demand and re‐entrant flavour that make its use very efficient, especially in terms of forced logs, which are known to be major sources of overhead in distributed systems. We illustrate the use of open consensus as a basic building block to develop a modular, yet efficient, total‐order broadcast protocol. Finally, we describe our Java implementation of our open‐consensus abstraction and we convey our efficiency claims through some practical performance measures. Copyright © 2001 John Wiley & Sons, Ltd.     

Identification of control and management strategies for LV unbalanced microgrids with plugged-in electric vehicles

This paper addresses issues concerning the integration of single-phase charging devices for electric vehicles (EV) in low-voltage microgrids. Fast release energy storage is a key issue for microgrid islanding operation. EV batteries provide an additional storage capacity, which can now be exploited in order to improve MG islanding. Aiming to do so, different control strategies were developed and tested: (1) a local control approach where no communication link is required and (2) a centralized charging control solution. The local control approach is based on the measuring of EV terminal voltage and frequency in order to define the charging or discharging rates of the batteries. The centralized control strategy allows balancing single-phase loads connected to the microgrid by adapting the charging rates of the EV storage devices. Simulation results show that EV batteries can actively contribute for voltage balancing and frequency control during islanding operating conditions.     

Electrical and Seismic Tomography Used to Image the Structure of a Tailings Pond at the Abandoned Kettara Mine, Morocco

The Kettara site (Morocco) is an abandoned pyrrhotite ore mine in a semi-arid environment. The site contains more than 3 million tons of mine waste that were deposited on the surface without concern for environmental consequences. Tailings were stockpiled in a pond, in a dyke, and in piles over an area of approximately 16?ha and have generated acid mine drainage (AMD) for more than 29?years. Geophysical methods have been used at the Kettara mine site to determine the nature of the geological substrate of the tailings pond, the internal structure of the mine wastes, and to investigate the pollution zones associated with sulphide waste dumps. Electrical resistivity tomography (ERT) and seismic refraction data were acquired, processed, and interpreted; the results from ERT and seismic refraction were complementary. A topographical survey of the tailings disposal area was also undertaken to estimate the volume of wastes and quantify the AMD process. Two-dimensional inverse models were used to investigate the geophysical data and indicated alteration zones at depth. It was determined that the material could be classified into three categories: tailings, with low resistivity (5?C15??? m) and low velocity (500?C1,800?m/s); altered, black shales, with intermediate resistivity (20?C60??? m) and velocity (2,000?C3,500?m/s), and; materials with high resistivity and velocity (>60????m and >4,000?m/s, respectively), including unaltered shales associated with quartzite seams. The low-resistivity zone generates AMD, which migrates downward through fractures and micro-fractures. The substrate is composed of broken and altered shale, which facilitates AMD infiltration.     

Effect of microwave treatment on the cooking and macronutrient qualities of pulses

The effect of microwave treatment to reduce the cooking times of five pulses, namely red lentil, chickpea, pigeon pea, mung bean, and pinto bean, were determined in this study. Pulses from 10 to 18% moisture contents were treated using 400 to 600 W microwaves for 14 to 56 s. The cooking times of microwave-treated pulses were significantly lower than that of the control samples. The lowest cooking time was observed for 18% moisture content chickpea and pigeon pea treated with 600 W for 56 s. The Fourier transform mid-infrared spectra in both lipids and fingerprint regions showed the macronutrients differences among the five pulses. Major changes were observed in the amide I region of microwave treated pulses. This effect of microwave treatment was higher in red lentil, chickpea, and mung bean than in pigeon pea and pinto bean at 10% moisture content. At 18% moisture content, the change of β-sheets to aggregates was observed in all pulses due to microwave treatment.     

Three-Dimensional Natural Convection in the Horizontal Bridgman Configuration Under Various Wall Electrical Conductivity and Magnetic Field

A numerical investigation of the three-dimensional natural convection of a liquid metal contained in the horizontal Bridgman configuration, having an aspect ratio equal to 5 and submitted to an external magnetic field in either the longitudinal or vertical direction, is presented. The numerical approach is based on the finite-volume approximation. A computer program based on the SIMPLER algorithm is developed. The effect of a magnetic field provides a notable change on the flow and thermal structures. The strongest stabilization of the convection flow is found when the magnetic field is oriented vertically. Also, wall electrical conductivity has an effect on the average Nusselt number. A good agreement between our numerical simulations and experimental data found in the literature is obtained.