Understanding the binder chemistry,microstructure, and physical properties of volcanic ash phosphate geopolymer binder

This work aims to assess the influence of the chemical composition of the binder resulting from the reaction of phosphoric acid and volcanic ash on its final characteristics. Six initial compositions of volcanic ash phosphate geopolymer with molar ratios Fe/P of 0.27, 0.5, 0.54, 0.81, 1, and 1.5 were designed by adding various dosages of phosphoric acid to volcanic ash. The results show that the hardening time increases with the decrease of molar ratios Fe/P. An excess of phosphoric acid leads to an unstable binder that is partially destroyed with the aging of the binder. The volcanic ash phosphate geopolymer with molar ratios of Fe/P = 0.5–0.54 has the optimum compressive strength (49–53 MPa at 90 days), the lowest water absorption (8.8-9.5 wt.%) as well as porosity (18–19.6 vol.%). The main binder is a porous phase of ferro-silico-aluminophosphate. Secondary phases were also identified in some mixes including ferro-aluminophosphate and magnesium phosphate.     

Role of Methyl Salicylate on Oviposition Deterrence in Arabidopsis thaliana

Plants attacked by herbivores have evolved different strategies that fend off their enemies. Insect eggs deposited on leaves have been shown to inhibit further oviposition through visual or chemical cues. In some plant species, the volatile methyl salicylate (MeSA) repels gravid insects but whether it plays the same role in the model species Arabidopsis thaliana is currently unknown. Here we showed that Pieris brassicae butterflies laid fewer eggs on Arabidopsis plants that were next to a MeSA dispenser or on plants with constitutively high MeSA emission than on control plants. Surprisingly, the MeSA biosynthesis mutant bsmt1-1 treated with egg extract was still repellent to butterflies when compared to untreated bsmt1-1. Moreover, the expression of BSMT1 was not enhanced by egg extract treatment but was induced by herbivory. Altogether, these results provide evidence that the deterring activity of eggs on gravid butterflies is independent of MeSA emission in Arabidopsis, and that MeSA might rather serve as a deterrent in plants challenged by feeding larvae.     

An investigation of the different TLM configurations used in the modelling of diffusion problems

The commonly used transmission-line modelling (TLM) network of one-dimensional diffusion problems often results in unwanted oscillations. Two different TLM configurations (line boundary (LB) and resistance boundary (RB)), are investigated with some techniques necessary to reduce the oscillations. Comparisons between the various LB and RB models addressed in this paper, indicate that, in general, two-dimensional TLM models produce consistently more accurate results.     

A New Strategy to Preserve and Assess Oxygen Consumption in Murine Tissues

Mitochondrial dysfunctions are implicated in several pathologies, such as metabolic, cardiovascular, respiratory, and neurological diseases, as well as in cancer and aging. These metabolic alterations are usually assessed in human or murine samples by mitochondrial respiratory chain enzymatic assays, by measuring the oxygen consumption of intact mitochondria isolated from tissues, or from cells obtained after physical or enzymatic disruption of the tissues. However, these methodologies do not maintain tissue multicellular organization and cell-cell interactions, known to influence mitochondrial metabolism. Here, we develop an optimal model to measure mitochondrial oxygen consumption in heart and lung tissue samples using the XF24 Extracellular Flux Analyzer (Seahorse) and discuss the advantages and limitations of this technological approach. Our results demonstrate that tissue organization, as well as mitochondrial ultrastructure and respiratory function, are preserved in heart and lung tissues freshly processed or after overnight conservation at 4 °C. Using this method, we confirmed the repeatedly reported obesity-associated mitochondrial dysfunction in the heart and extended it to the lungs. We set up and validated a new strategy to optimally assess mitochondrial function in murine tissues. As such, this method is of great potential interest for monitoring mitochondrial function in cohort samples.     

Label-Free Study of the Global Cell Behavior during Exposure to Environmental Radiofrequency Fields in the Presence or Absence of Pro-Apoptotic or Pro-Autophagic Treatments

It remains controversial whether exposure to environmental radiofrequency signals (RF) impacts cell status or response to cellular stress such as apoptosis or autophagy. We used two label-free techniques, cellular impedancemetry and Digital Holographic Microscopy (DHM), to assess the overall cellular response during RF exposure alone, or during co-exposure to RF and chemical treatments known to induce either apoptosis or autophagy. Two human cell lines (SH-SY5Y and HCT116) and two cultures of primary rat cortex cells (astrocytes and co-culture of neurons and glial cells) were exposed to RF using an 1800 MHz carrier wave modulated with various environmental signals (GSM: Global System for Mobile Communications, 2G signal), UMTS (Universal Mobile Telecommunications System, 3G signal), LTE (Long-Term Evolution, 4G signal, and Wi-Fi) or unmodulated RF (continuous wave, CW). The specific absorption rates (S.A.R.) used were 1.5 and 6 W/kg during DHM experiments and ranged from 5 to 24 W/kg during the recording of cellular impedance. Cells were continuously exposed for three to five consecutive days while the temporal phenotypic signature of cells behavior was recorded at constant temperature. Statistical analysis of the results does not indicate that RF-EMF exposure impacted the global behavior of healthy, apoptotic, or autophagic cells, even at S.A.R. levels higher than the guidelines, provided that the temperature was kept constant.     

Improved thin film stability of differently formulated,printed, and crosslinked polymer layers against successive solvent printing

Interface control remains a top challenge of solution-processed organic light emitting diodes (OLED) stacks since the device performance heavily relies on it. Film stability of an inkjet deposited and crosslinked layer against subsequent exposure to a suitable inkjet printed solvent has been investigated. Impact of processing solvent (solvent used to prepare the polymer layer) on solution-cast thin film properties has already been shown for polymer films. To our knowledge, this study is the first one analyzing thin films stability against solvent exposure using technology relevant materials processed via inkjet printing (IJP). The outcome of this research showed that the stability of the crosslinked films is affected by the solvent used for ink formulation. These findings are of great interest for multilayered semiconductors devices, such as OLEDs, field-effect transistors and dye-sensitized solar cells. Differential scanning calorimetry (DSC) was used to quantify the efficiency of the polymer crosslinking reaction in pure powder and in thin films, as processed from different solvents. Crosslinking efficiency measured by DSC correlated well with the deformation induced by the solvent and observed on layer surfaces. The interaction in solution between polymer and solvent has also been evaluated to explain its impact on thin film stability against successive solvent printing. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48895.     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

Determining the domestic specific loads of two wastewater plants of the Paris conurbation (France) with contrasted treatments: a step for exploring the effects of the application of the European Directive

The effluents of wastewater treatment plants (WTTP) discharged into the rivers considerably affect the biogeochemical functioning of the system. In this paper, we characterize both raw and treated domestic wastewater from two WTTPs of Parisian agglomeration using different process treatments (Achères WWTP with a secondary treatment and Colombes WWTP with a tertiary one). In addition to the classical variables, we analyse the input of bacteria, both the heterotrophs and the nitrifyers. Tertiary treatment leads to significantly decrease ammonium-specific load (< 2 g KjN inhab equ.(-1) instead of 9 g KjN inhab equ.(-1) for secondary treatment) and notably reduces the one of organic matter (approximately 2.5 g biological oxygen demand (BOD) inhab equ.(-1) instead of approximately 7.5 g BOD inhab equ.(-1) for secondary treatment); it is therefore promising to improve oxygen status of both the Seine river and its estuary. In terms of total bacterial biomass abatement (the heterotrophs mostly), bioreactors (at Colombes WWTP) eliminate 12% more bacterial biomass than the activated sludge treatment (at Achères WWTP). Regarding the nitrifying bacteria, a tertiary treatment in bioreactors eliminates reverse similar 90% of both nitrifying bacteria and nitrogen pollution of wastewater. Bacterial populations are characterized by large size bacteria (> 1 microm) with a higher growth rate, that represent in the treatment plant effluents 70% of the biomass. These large size bacteria have therefore a strong impact in the organic matter degradation and oxygen consumption. Relationships between classical physical-chemical variables routinely analysed in WWTPs laboratory and bacterial biomass (heterotrophic and nitrifying) are established, in order to quantify the ecological role of the allochthonous bacteria brought into the river system. In addition, domestic specific loads are calculated for both raw and treated effluents of the two types of WWTPs. As the application of the European Water Directive requires to upgrade the wastewater treatment at Achères WWTP as soon as 2007 for 90% nitrification and 30% denitrification and in 2015 for further denitrification (up to 70%), the results of this study can be taken as point-source constraints into the modelling approach already developed for the Seine basin, and chosen to test the implementation of the Water Frame Directive.     

Development and numerical validation of a new model for walls with phase change materials implemented in TRNSYS

This paper presents a model of a wall with variable properties dedicated to modelling phase change materials (PCMs) in building envelopes. The model is implemented in the TRNSYS simulation tool and referred to as Type 3258. The 1-D conduction heat transfer equation is solved using an explicit finite-difference method coupled with an enthalpy method to consider the variable PCM thermal capacity. This model includes temperature-dependent thermal conductivity and PCM-specific effects like hysteresis and supercooling. The stability conditions are discussed and the algorithm implemented in TRNSYS is described. A numerical validation performed on wall test cases proposed by the International Energy Agency is presented, showing that the developed model is in agreement with reference models. The paper also discusses the impact of temporal and spatial discretization on the model performance. Modelling problems encountered when using an effective heat capacity method (compared to an enthalpy method) and when representing supercooling are also discussed.     

Synthesis of MIL-101@g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposite for enhanced adsorption capacity towards CO<Subscript>2</Subscript>

MIL-101@g-C₃N₄ nanocomposite was prepared by solvothermal synthesis and used for CO₂ adsorption. The parent materials (MIL-101 and g-C₃N₄) and the MIL-101@g-C₃N₄ were characterized by X-ray diffraction, argon adsorption/desorption, Fourier transform infrared spectroscopy, thermal analysis (TG/DTA), transmission electronic microscopy, and Energy-dispersive X-ray spectroscopy. The results confirmed the formation of well-defined MIL-101@g-C₃N₄ with interesting surface area and pore volume. Furthermore, both MIL-101 and MIL-101@g-C₃N₄ were accomplished in carbon dioxide capture at different temperatures (280, 288, 273 and 298 K) at lower pressure. The adsorption isotherms show that the nanocomposite has a good CO₂ adsorption affinity compared to MIL-101. The best adsorption capacity is about 1.6 mmol g^?1 obtained for the nanocomposite material which is two times higher than that of MIL-101, indicating strong interactions between CO₂ and MIL-101@g-C₃N₄. This difference in efficacy is mainly due to the presence of the amine groups dispersed in the nanocomposite. Finally, we have developed a simple route for the preparation of an effective and new adsorbent for the removal of CO₂, which can be used as an excellent candidate for gas storage, catalysis, and adsorption.