Biodiesel from rapeseed oil,methanol and KOH. 3. Analysis of composition of actual reaction mixture

Detailed analysis is described of the samples taken after suitable reaction times from the actual reaction mixture during the production of biodiesel fuel using methanolysis of rapeseed oil catalyzed by KOH. Three methods for stoppage of reaction (neutralisation of catalyst, dilution by two suitable solvents) in the sample are used. The contents of mono‐, di‐ and triacylglycerols, methylesters of fatty acids (biodiesel) and potassium salts of fatty acids of rapeseed oil, glycerol (by HPLC method), basicity (by potentiometric titration) and water (by GC and Karl‐Fischer method) in the samples are determined. An example of these determinations is described.     

Application of Structure-Based Models of Mechanical and Thermal Properties on Plasma Sprayed Coatings

Mechanical and thermal properties of thermal sprayed coatings, especially ceramics, are strongly influenced by cracks and pores that are present in the coating microstructure. In the recent past, there have been efforts to find an analytical model describing the coating properties based on the microstructural characteristics. Various analytical models were developed and published in the literature. In this study, several major models were applied to ceramic and metal coatings to describe their elastic modulus and thermal conductivity. The sensitivity of the models to the variations in the microstructure and relevancy of their use in specific cases were examined. The results were compared with those obtained by FEM modeling and experimentally measured values.     

A dual‐primal FETI method for solving a class of fluid–structure interaction problems in the frequency domain

The dual‐primal finite element tearing and interconnecting method (FETI‐DP) is extended to systems of linear equations arising from a finite element discretization for a class of fluid–structure interaction problems in the frequency domain. A preconditioned generalized minimal residual method is used to solve the linear equations for the Lagrange multipliers introduced on the subdomain boundaries to enforce continuity of the solution. The coupling between the fluid and the structure on the fluid–structure interface requires an appropriate choice of coarse level degrees of freedom in the FETI‐DP algorithm to achieve fast convergence. Several choices are proposed and tested by numerical experiments on three‐dimensional fluid–structure interaction problems in the mid‐frequency regime that demonstrate the greatly improved performance of the proposed algorithm over the standard FETI‐DP method. Copyright © 2011 John Wiley & Sons, Ltd.     

Off-line coupling of capillary electrophoresis to substrate-assisted laser desorption inductively coupled plasma mass spectrometry

A novel off-line coupling of capillary electrophoresis (CE) and inductively coupled plasma mass spectrometry (ICPMS) is reported here. The coupling interface is based on the connection of a separation capillary to a deposition capillary via a liquid junction maintaining high separation efficiency and sample utilization due to the self-focusing effect and lack of pressure-induced flow in comparison with nebulizer-like interfaces. The separation is recorded in the form of droplets of CE effluent on a suitable substrate--a poly(ethylene terephthalate) glycol (PETG) sample plate placed inside a partially evacuated chamber. Substrate-assisted laser desorption (SALD) is used to vaporize the sample fractions and to enable further transfer to the ICPMS. The mechanism of SALD is examined using model samples deposited on a variety of substrates. The highest response is obtained for a PETG substrate; sample desorption due to ablation of PETG is found to outweigh direct ablation of sample. Detection limits are given for several metal elements. Finally, a rapid (2.5-min), high-resolution separation of Cr(III)/Cr(VI) species injected in subpicomolar quantity is shown.     

Long-term lining performance - Civil engineering problem of potential retrieval of buried spent nuclear fuel

The current solution for the spent fuel, high-level and long-lived radioactive waste is to store them at surface facilities from which they will be subsequently moved to a deep repository. No such repositories are in operation currently but several such facilities are close to the construction phase. A deep repository can be situated in several types of geological conditions including clay formations, salt sediments, argillites and tuffitic and granitic rocks. The character of the host rock is the key factor determining the design and specific requirements of individual components of such a facility. The future potential retrieval of canisters containing nuclear waste from the repository is a further influential factor. The reason for retrieval of containers lies in the development of fast reactors and increased interest for spent fuel reprocessing. Naturally, the decision as to whether retrievability is technically feasible must be made before finalising the design and construction process of the repository. If the decision is made to retrieve, a design which will include all the relevant safety aspects for the potential retrieval of canisters must be determined. The lay-out of the repository, the materials to be used and the design of the various structures of the facility (e.g. access tunnels, disposal shafts, buffer and backfill) are not the only issues to be addressed. The long-term stability of the system as a whole, i.e. of all the components, is crucial. Depending on the disposal concept chosen, the thermal load generated by the waste in the disposal container, saturation by water from the surrounding environment and the loading of the host rock massif will constitute the main processes which will affect the behaviour, safety and future functioning of the repository from the civil engineering point of view. The long-term stability of the lining of disposal galleries is a basic precondition for the safe removal of spent nuclear waste from deep underground repositories. The stability problems of tunnel linings exposed to long-term thermal load have not yet been properly addressed and form the subject of the European TIMODAZ project (Thermal Impact on the Damaged Zone around a Radioactive Waste Disposal in Clay Host Rocks) and also supported by the “Complex System of Methods for Directed Design and Assessment of Functional Properties of Building Materials” project. This paper describes the design, construction and currently available results of a 1:1 scale “in situ” disposal tunnel model which has been built at the Josef Underground Educational Facility in the Czech Republic.     

A hybrid discontinuous in space and time Galerkin method for wave propagation problems

Medium‐frequency regime and multi‐scale wave propagation problems have been a subject of active research in computational acoustics recently. New techniques have attempted to overcome the limitations of existing discretization methods that tend to suffer from dispersion. One such technique, the discontinuous enrichment method, incorporates features of the governing partial differential equation in the approximation, in particular, the solutions of the homogeneous form of the equation. Here, based on this concept and by extension of a conventional space–time finite element method, a hybrid discontinuous Galerkin method (DGM) for the numerical solution of transient problems governed by the wave equation in two and three spatial dimensions is described. The discontinuous formulation in both space and time enables the use of solutions to the homogeneous wave equation in the approximation. In this contribution, within each finite element, the solutions in the form of polynomial waves are employed. The continuity of these polynomial waves is weakly enforced through suitably chosen Lagrange multipliers. Results for two‐dimensional and three‐dimensional problems, in both low‐frequency and medium‐frequency regimes, show that the proposed DGM outperforms the conventional space–time finite element method. Copyright © 2014 John Wiley & Sons, Ltd.     

Antenna Protein Clustering In Vitro Unveiled by Fluorescence Correlation Spectroscopy

Antenna protein aggregation is one of the principal mechanisms considered effective in protecting phototrophs against high light damage. Commonly, it is induced, in vitro, by decreasing detergent concentration and pH of a solution of purified antennas; the resulting reduction in fluorescence emission is considered to be representative of non-photochemical quenching in vivo. However, little is known about the actual size and organization of antenna particles formed by this means, and hence the physiological relevance of this experimental approach is questionable. Here, a quasi-single molecule method, fluorescence correlation spectroscopy (FCS), was applied during in vitro quenching of LHCII trimers from higher plants for a parallel estimation of particle size, fluorescence, and antenna cluster homogeneity in a single measurement. FCS revealed that, below detergent critical micelle concentration, low pH promoted the formation of large protein oligomers of sizes up to micrometers, and therefore is apparently incompatible with thylakoid membranes. In contrast, LHCII clusters formed at high pH were smaller and homogenous, and yet still capable of efficient quenching. The results altogether set the physiological validity limits of in vitro quenching experiments. Our data also support the idea that the small, moderately quenching LHCII oligomers found at high pH could be relevant with respect to non-photochemical quenching in vivo.