Syntheses of female sex pheromone precursors of pine sawfly species and of some structurally related methyl-branched long-chain 2-alkanols

3,7-Dimethyl-2-undecanol, 3,7,9-trimethyl-2-tridecanol, and 3,7, 11-trimethyl-2-tridecanol were synthesized as racemic mixtures in moderate yields. The alcohols are known precursors of the female sex pheromones of the pine sawfly species Diprion nipponica, Macrodiprion nemoralis, and Microdiprion pallipes, respectively. Stereoisomeric mixtures of 3,8,12-trimethyl-2-tridecanol, erythro-(2R,3R,11R/S)-3,11-dimethyl-2-tetradecanol, 3,5-dimethyl-2-tetradecanol, and 5,7-dimethyl-2-tetradecanol, structurally related to sex pheromone alcohol precursors of pine sawfly species, were also synthesized in moderate yields. The key reaction in the syntheses was the ring opening of -butyrolactones by using different alkyl lithiums as nucleophiles.     

Influence of Pt Loading on Al2O3 for the Low Temperature Combustion of Methanol with and Without a Trace Amount of Ammonia

Pt/Al₂O₃ catalysts with platinum contents of 0.1, 1.0 and 3.0 wt% were used for the low temperature combustion of methanol in the absence and the respective presence of a trace amount of ammonia. It is observed that ammonia inhibits the combustion of methanol, which is due to competition between methanol and ammonia for the same sites. For a fixed space velocity and without ammonia in the gas, the performances of the catalysts increase up to a Pt loading of 1.0 wt%. In the presence of ammonia, however, no upper limit of performance is observed with increased Pt content. The results are discussed in terms of both Pt–support interface and the Pt surface being active.     

Gas-liquid mass transfer in taylor flow through a capillary

The gas-liquid mass transfer in two-phase flow through a capillary has been measured for water-air, ethanol-air and ethylene glycol-air systems. A semi-theoretical model has been developed and compared with experimental results. and a full computer simulations of the flow pattern and mass transfer using a flow simulation program have been made. The measured values are about 30% less than the calculated values.     

Catalytic behaviour of M1, M2, and M1/M2 physical mixtures of the Mo–V–Nb–Te–oxide system in propane and propene ammoxidation

Essentially pure orthorhombic M1 and pseudo-hexagonal M2 phases were prepared using the precursor method. Consistent with literature the M1 phase was shown to be effective for propane ammoxidation to acrylonitrile while the M2 phase was essentially inert for propane activation. Both phases convert propene efficiently to acrylonitrile. Both phases show a significant selectivity dependence on the ammonia and oxygen concentrations in the feed, revealing thereby additional insights into the reaction mechanism.

Physical mixtures of the two separately prepared phases exhibited symbiosis in the ammoxidation of propane when finally divided (5 μm), thoroughly mixed and brought into intimate contact with each other. Acrylonitrile yields significantly higher than those obtained with the M1 phase alone were demonstrated with a 50 wt.% M1/50 wt.% M2 physical mixture having a corresponding surface area ratio of about 4:1. The phase cooperation effect is particularly large at high propane conversions and non-existent when the particle size of the phases is too large (e.g. >250 μm) and the inter-particle contact is poor.     

Analysis of Polycyclic Aromatic Hydrocarbons in Egyptian Petroleum Condensate Oils

The polycyclic aromatic hydrocarbons (PAH) in Egyptian condensates are analyzed for the first. A solid phase extraction (SPE) followed by gas chromatography-mass selective detection was used for their analysis. The method was calibrated for optimal extraction conditions. Excellent recoveries were found (78–114%) for the PAHs that were identified using a variety of standards and GC-MS spectra. The solid-phase extracted PAH fraction was further separated by HPLC on a Ag(I) mercaptopropanosilica gel to reduce the complexity of the sample by separating the PAHs based on the number of aromatic rings. The analytes were quantified using GC with a flame ionization detector. For this kind of sample SPE is a more convenient separation technique than an open column. PAHs containing two to four rings in the concentration range 0.6–11 μg/L were measured. Some preliminary geochemical hypotheses based on the analyzed PAHs and the previously analyzed S-containing aromatic compounds were formed as to the depositional environment and source rock type.     

Characterization of Particulate Matter from Direct Injected Gasoline Engines

The reactivity and reaction kinetics of particulate matter (PM) from direct injected gasoline (GDI) engines has been studied by O₂ and NO₂ based temperature programmed and isothermal step-response experiments, and the PM nano-structure has been characterized using HRTEM. The reactivity of the PM samples collected in filters during on-road driving was found to increase in the following order: Printex U < diesel < gasoline PI ≈ gasoline DI < ethanol for O₂ based combustion. The activation energies for O₂ and NO₂ based oxidation of PM collected from a GDI engine in an engine bench set-up was estimated to 146 and 71 kJ/mol respectively, which is comparable to corresponding values reported for diesel and model soot. Similar nano-structure features (crystallites plane dimensions, curvature and relative orientation) as observed for diesel soot were observed for gasoline PM.     

Oxides of copper, ceria promoted copper, manganese and copper manganese on Al2O3 for the combustion of CO, ethyl acetate and ethanol

Combustion of CO, ethyl acetate and ethanol was studied over CuO_x/Al₂O₃, CuO_x–CeO₂/Al₂O₃, CuMn₂O₄/Al₂O₃ and Mn₂O₃/Al₂O₃ catalysts. It was found that modification of the alumina with ceria before subsequent copper oxide deposition increases the activity for combustion of CO substantially, but the effect of ceria was small on the combustion of ethyl acetate and ethanol. The activity increases with the CuO_x loading until crystalline CuO particles are formed, which contribute little to the total active surface. The CuO_x–CeO₂/Al₂O₃ catalyst is more active than the CuMn₂O₄/Al₂O₃ catalyst for the oxidation of CO but the CuMn₂O₄/Al₂O₃ catalyst is more active for the combustion of ethyl acetate and ethanol.

Thermal ageing and water vapour in the feed caused a modest decrease in activity and did not affect the CuO_x–CeO₂/Al₂O₃ and CuMn₂O₄/Al₂O₃ catalysts differently. In addition, no difference in intermediates formed over the two catalysts was observed.

Characterisation with XRD, FT-Raman and TPR indicates that the copper oxide is present as a copper aluminate surface phase on alumina at low loading. At high loading, bulk CuO crystallites are present as well. Modification of the alumina with ceria before the copper oxide deposition gives well dispersed copper oxide species and bulk CuO crystallites associated to the ceria, in addition to the two copper oxide species on the bare alumina. The distribution of copper species depends on the ceria and copper oxide loading. The alumina supported copper manganese oxide and manganese oxide catalysts consist mainly of crystalline CuMn₂O₄ and Mn₂O₃, respectively, on Al₂O₃.