Swelling behaviour of a geofiber-reinforced expansive soil

This paper reports the results of laboratory study performed on expansive soil reinforced with geofibers and demonstrates that discrete and randomly distributed geofibers are useful in restraining the swelling tendency of expansive soils. Swelling characteristics of remoulded expansive soil specimens reinforced with varying fiber content (f = 0.25% and 0.50%) and aspect ratio (l/b = 15, 30 and 45) were studied. One-dimensional swell-consolidation tests were conducted on oedometer specimens. Reduction in heave and swelling pressure was the maximum at low aspect ratios at both the fiber contents of 0.25% and 0.50%. Finally, the mechanism by which discrete and randomly distributed fibers restrain swelling of expansive soil is explained with the help of soil–fiber interaction.     

Slip in flows of power-law liquids past smooth spherical particles

The effect of slip in flows of power-law liquids past smooth spherical particles is numerically studied by using Navier’s linear slip model. For computational simplicity, a sphere-in-sphere type computational domain has been chosen. Thus, the governing conservation equations of mass and momentum are considered in spherical coordinates. These are solved by using a finite difference method-based simplified marker and cell algorithm implemented on a staggered grid arrangement. The non-Newtonian terms of the momentum equation are discretized by a second-order central differencing scheme, whereas the convective terms are discretized by using QUICK scheme. The reliability and accuracy of the solver is established by comparing the present numerical results with the existing literature counterparts. Furthermore, extensive new results are obtained in the range of conditions for Reynolds number, Re: 0.1–200; power-law behavior index, n: 0.5–1.6; and a dimensionless slip parameter, λ: 0.01–100. Finally, effects of these dimensionless parameters on near surface flow kinematics are thoroughly delineated.     

Magnetic resonance image denoising using nonlocal maximum likelihood paradigm in DCT‐framework

The data acquired by magnetic resonance (MR) imaging system are inherently degraded by noise that has its origin in the thermal Brownian motion of electrons. Denoising can enhance the quality (by improving the SNR) of the acquired MR image, which is important for both visual analysis and other post processing operations. Recent works on maximum likelihood (ML) based denoising shows that ML methods are very effective in denoising MR images and has an edge over the other state‐of‐the‐art methods for MRI denoising. Among the ML based approaches, the Nonlocal maximum likelihood (NLML) method is commonly used. In the conventional NLML method, the samples for the ML estimation of the unknown true pixel are chosen in a nonlocal fashion based on the intensity similarity of the pixel neighborhoods. Euclidean distance is generally used to measure this similarity. It has been recently shown that computing similarity measure is more robust in discrete cosine transform (DCT) subspace, compared with Euclidean image subspace. Motivated by this observation, we integrated DCT into NLML to produce an improved MRI filtration process. Other than improving the SNR, the time complexity of the conventional NLML can also be significantly reduced through the proposed approach. On synthetic MR brain image, an average improvement of 5% in PSNR and 86%reduction in execution time is achieved with a search window size of 91 × 91 after incorporating the improvements in the existing NLML method. On an experimental kiwi fruit image an improvement of 10% in PSNR is achieved. We did experiments on both simulated and real data sets to validate and to demonstrate the effectiveness of the proposed method. © 2015 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 25, 256–264, 2015     

Modelling and kinetic aspects of a BTEX contaminated air-treating biofilter

In this study, the overall performance of a biofilter was evaluated in terms of its elimination capacity by using 3-D mesh techniques. The overall results indicate that the agreement between experimental data and model predictions is excellent for benzene, toluene, ethylbenzene and o-xylene (BTEX). In this study, the maximum removal rate (r _max) values for BTEX were 0.0117, 0.0126, 0.0081 and 0.0146 g m^–3 h^–1, and the half-saturation constant (K_S ) values were calculated to be 0.269, 0.297, 0.156 and 0.394 g m^–3, respectively. For this system, the coefficients of determination (r ²) of BTEX compounds were greater than 0.97. The BTEX concentration profiles along the depth were also determined using a convection–diffusion reactor (CDR) model. The sums of squares of the errors (SSEs) of BTEX were 0.0078, 0.0059, 0.0129 and 0.0269, respectively, with r ² values greater than 0.99 for all four compounds at low concentrations.     

Enhanced Visible Light Photocatalytic Activity of Curcumin‐Sensitized Perovskite Bi0.5Na0.5TiO3 for Rhodamine 6G Degradation

Curcumin‐sensitized perovskite Bi_0.5Na_0.5TiO₃ (BNT) was synthesized for visible light photocatalytic decolorization of rhodamine 6G (Rh6G). Cube‐shaped perovskite BNT was synthesized by solid‐state route, and curcumin sensitization was performed using hydrothermal method. The surface sensitization of curcumin was analyzed by UV–Vis absorption spectra and FTIR. The degradation kinetics of Rh6G over Cur‐BNT were investigated and discussed through first‐order Langmuir–Hinshelwood kinetic model. The effect of catalyst dose on photocatalytic decolorization process was investigated. Photocatalysis was performed with different scavengers to investigate the role of active hole and radical species and photocatalytic degradation mechanism of Rh6G.     

Effect of ferroelectric polarization on piezo/photocatalysis in Ag nanoparticles loaded 0.5(Ba0.7Ca0.3)TiO3–0.5Ba(Zr0.1Ti0.9)O3 composites towards the degradation of organic pollutants

A 0.5(Ba_0.7Ca_0.3)TiO₃–0.5Ba(Zr_0.1Ti_0.9)O₃ (BCT-BZT) ceramic was studied for photocatalysis and piezocatalysis effects using dye degradation (methylene blue, rhodamine B, and methyl orange) and bacterial (Escherichia coli) disinfection from aqueous solution. To examine the effect of ferroelectric polarization, BCT-BZT powder was poled using the corona poling technique. Same time, BCT-BZT was converted into Ag/BCT-BZT composites as Ag induced surface plasmon resonance effect during photocatalysis. Piezocatalysis performance was assessed for dyes mineralization under ultrasonication. There was a significant impact of silver nanoparticles on the photo/piezocatalysis performance of BCT-BZT. Similarly, electric poling has also played a positive role in improving the photo/piezocatalysis in view of various dye degradation. These samples also showed effective antibacterial performance.     

Solar/visible light photocatalytic dye degradation using BaTi1−xFexO3 ceramics

BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were prepared via a solid-state reaction route. The presence of iron (Fe) in barium titanate (BaTiO₃) eventually decreased the energy bandgap; thus, its utilization for water cleaning application through photocatalysis process was explored (using methylene blue [MB] dye as an indicative pollutant in water). Characterization of the synthesized powder was performed through scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The bandgap of the synthesized powder was calculated as 3.2, 2.12, and 1.67 eV for BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), respectively. BaTi_0.8Fe_0.2O₃ powder showed excellent results, and ∼71% of the MB dye (∼5 mg/L concentrated) was degraded using the photocatalysis process under visible light. To check the potentiality of BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), the photocatalysis process was carried out by changing the concentration of MB dye (2.5–10 mg/L with a step of 2.5 mg/L) and the amount of BaTi_0.8Fe_0.2O₃ powder (0.05–0.2 g with a step of 0.05 g) for ∼5-mg/L concentrated MB dye. The treated water was further used as a growth parameter and phytotoxicity analysis through germination index on the wheat seeds. Lastly, the BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were explored for water cleaning applications under real-time solar irradiation.     

Accelerated Design of Eutectic High Entropy Alloys by ICME Approach

Eutectic high entropy alloy with seven components is designed based on the integrated computational materials engineering (ICME) framework. The framework includes thermodynamic prediction using calculation of phase diagrams (CALPHAD), microstructure simulation using phase-field method, and experimental validation. The designed alloy shows the eutectic structure consisting of FCC and laves phase in the composition range from 8.25 to 10 at. pct Ta. The simulation and experimental results are co-related and a framework is proposed that can be used for high entropy alloy design subjected to various manufacturing processes.

     

Effect of Ti Addition and Microstructural Evolution on Toughening and Strengthening Behavior of as Cast or Annealed Nb–Si–Mo Based Hypoeutectic and Hypereutectic Alloys

Room temperature fracture toughness along with compressive deformation behavior at both room and high temperatures (900 °C, 1000 °C and 1100 °C) has been evaluated for ternary or quaternary hypoeutectic (Nb–12Si–5Mo and Nb–12Si–5Mo–20Ti) and hypereutectic (Nb–19Si–5Mo and Nb–19Si–5Mo–20Ti) Nb-silicide based intermetallic alloys to examine the effects of composition, microstructure, and annealing (100 hours at 1500 °C). On Ti-addition and annealing, the fracture toughness has increased by up to ~ 75 and ~ 63 pct, respectively with ~ 14 MPa√m being recorded for the annealed Nb–12Si–5Mo–20Ti alloy. Toughening is ascribed to formation of non-lamellar eutectic with coarse Nb_ss, which contributes to crack path tortuosity by bridging, arrest, branching and deflection of cracks. The room temperature compressive strengths are found as ~ 2200 to 2400 MPa for as-cast alloys, and ~ 1700 to 2000 MPa after annealing with the strength reduction being higher for the hypoeutectic compositions due to larger Nb_ss content. Further, the compressive ductility has varied from 5.7 to 6.5 pct. The fracture surfaces obtained from room temperature compression tests have revealed evidence of brittle failure with cleavage facets and river patterns in Nb_ss along with its decohesion at non-lamellar eutectic. The compressive yield stress decreases with increase in test temperature, with the hypoeutectic alloys exhibiting higher strength retention indicating the predominant role of solid solution strengthening of Nb_ss. The flow curves obtained from high temperature compression tests show initial work hardening, followed by a steady state regime indicating dynamic recovery involving the formation of low angle grain boundaries in the Nb_ss, as confirmed by electron backscattered diffraction of the annealed Nb–12Si–5Mo alloy compression tested at 1100 °C.

     

Studies of the polymerization of methacrylic acid via free-radical retrograde precipitation polymerization process

In this paper, we present some new results of our work in a novel polymerization process (called the free-radical retrograde precipitation polymerization, or FRRPP, process) that occurs at temperatures above the lower critical solution temperature. Our polymerization experiments basically involve the methacrylic acid–poly(methacrylic acid)–water system. Experimental results indicate a gradual increase in conversion with time after what seemingly is the onset of phase separation. In an equivalent solution polymerization system, conversion of methacrylic acid reaches almost 100% at a much shorter time than in the FRRPP system. Molecular weights of poly(methacrylic acid) at different times for the FRRPP system are not dramatically different from those obtained in the solution system. However, the FRRPP system yields a relatively narrow molecular weight distribution at a wide range of conversion compared to that obtained in the equivalent solution system. The unique characteristics of the FRRPP process is shown in the asymptotic time behavior of the free-radical concentration compared to the decay behavior in other polymerization systems. © 1996 John Wiley & Sons, Inc.