Thermogravimetric analysis and morphological behavior of melamine‐formaldehyde filled polyvinyl acetate—Polyester nonwoven fabric composites

The objective of the present research work is to study the effect of different amounts of melamine‐formaldehyde (MF) viz., 0–20 parts by dry weight on the thermal stability of polyvinyl acetate (PVAc) latex impregnated polyester nonwoven fabric composites. From the thermogravimetric analysis, the improvement in thermal stability of the composites was noticed with increase in the MF content. Composites fabricated with five parts MF‐incorporated PVAc showed a drastic increase in the onset degradation temperature when compared with unfilled composites. It was found that the degradation of MF‐loaded PVAc‐polyester nonwoven fabric composites takes place in two steps. Degradation kinetic parameters were calculated for the composites using Broido and Horowitz‐Metzger methods. The tensile fractured composite specimens were analyzed using scanning electron microscope to know the morphological behavior. The increased percentage ash content also supports for the increased thermal stability of the composites with increasing the MF content in the system. The adhesion between the fiber and matrix can be seen from scanning electron microphotographs. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of polysaccharide based graft copolymer by using potassium peroxymonosulphate/ascorbic acid as an efficient redox initiator in inert atmosphere

Polysaccharide based graft copolymer (xanthan gum‐g‐4‐vinyl pyridine) was synthesized using potassium peroxymonosulphate/ascorbic acid redox initiator in inert atmosphere at 40°C. By studying the effect of the concentration of monomer, peroxymonosulphate (PMS), ascorbic acid (AA), xanthan gum (XOH), hydrogen ion along with effect of time and temperature on grafting characteristics: grafting ratio (%G), add on (%A), conversion (%C), efficiency (%E), homopolymer (%H), and rate of grafting (Rg), the reaction conditions for optimum grafting were determined. The optimum concentration of AA, H⁺ ion, 4‐VP for maximum grafting were found to be 10.0 × 10^?3 mol dm^?3, 2.5 × 10^?2 mol dm^?3, 10.0 × 10^?3 mol dm^?3, respectively. Maximum %G was obtained at minimum concentration of xanthan gum i.e., at 40.0 × 10^?2 g dm^?3 and at maximum concentration of PMS i.e., at 10.0 × 10^?3 mol dm^?3. The optimum temperature and time duration of reaction for maximum % of grafting were found to be 45°C and 120 min respectively. The synthesized graft copolymer was characterized by FTIR analysis. Thermogravimetric analysis showed that the xanthan gum‐g‐4‐vinyl pyridine is thermally more stable than pure gum. A probable mechanism was suggested for the graft copolymerization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of chitosan‐g‐methacrylic acid and studies of its additional physicochemical properties,such as swelling,metal‐ion sorption,and flocculation behavior

The aim of this study was to examine the synthesis of a graft copolymer of chitosan and methacrylic acid (MAA) by free‐radical polymerization with a potassium peroxymonosulfate/cyclohexanone (CY) redox system in an inert atmosphere. The optimum reaction conditions affording maximum grafting ratio (%G), grafting efficiency (%E), add on (%A), and conversion (%C) were determined. The grafting parameters were found to increase with increasing concentration of MAA up to 24 × 10^?2 mol/dm³, but thereafter, these parameters decreased. With increasing concentration of peroxymonosulfate from 0.6 × 10^?2 to 1.2 × 10^?2 mol/dm³, %G, %A, and %E increased continuously. All of these grafting parameters increased with increasing concentration of CY up to 1.2 × 10^?2 mol/dm³, but beyond this concentration, the grafting parameters decreased. With various concentrations of chitosan from 0.6 to 1.4 g/dm³, the maximum %G, %A, and %E were obtained at 1.4 g/dm³. %G, %A, and %C decreased continuously with various concentrations of hydrogen ions from 2 × 10^?3 to 6 × 10^?3 mol/dm³. The grafting parameters increased with increasing temperature up to 35°C, but thereafter, these parameters decreased. With increasing time period of reaction from 60 to 180 min, %G, %A, and %E increased up to 120 min, but thereafter, these parameters decreased. The graft copolymer was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Process modeling and optimization of industrial ethylene oxide reactor by integrating support vector regression and genetic algorithm

This article presents an artificial intelligence‐based process modeling and optimization strategies, namely support vector regression–genetic algorithm (SVR‐GA) for modeling and optimization of catalytic industrial ethylene oxide (EO) reactor. In the SVR‐GA approach, an SVR model is constructed for correlating process data comprising values of operating and performance variables. Next, model inputs describing process operating variables are optimized using Genetic Algorithm (GAs) with a view to maximize the process performance. The GA possesses certain unique advantages over the commonly used gradient‐based deterministic optimization algorithms The SVR‐GA is a new strategy for chemical process modeling and optimization. The major advantage of the strategies is that modeling and optimization can be conducted exclusively from the historic process data wherein the detailed knowledge of process phenomenology (reaction mechanism, kinetics, etc.) is not required. Using SVR‐GA strategy, a number of sets of optimized operating conditions leading to maximized EO production and catalyst selectivity were obtained. The optimized solutions when verified in actual plant resulted in a significant improvement in the EO production rate and catalyst selectivity.     

Magnetite‐loaded calcium‐alginate (MLCA) particles as potential sorbent for removal of Ni(II) from aqueous solution

This work is focused on the removal of Ni(II) from aqueous solutions by sorption onto newly developed magnetite‐loaded calcium alginate particles. The uptake of Ni(II) by these magnetite particles, with their mean geometrical diameter 84 and 508 μm, is best described by the Freundlich isotherm and the constants K_F and 1/n were found to be 3.491 mg g^?1, 0.731 and 0.793 mg g^?1 and 0.907, respectively. The mean sorption energy, as determined by Dubinin‐Radushkevich isotherm for 508‐ and 84‐μm sized particles was evaluated to be 8.9 and 8.0 kJ mol^?1, respectively, thus, suggesting the ion‐exchange mechanism for uptake process. Of the various kinetic models proposed, the kinetic Ni(II)‐uptake data were best interpreted by “Simple Elovich” and “Power function” as suggested by their higher regression values. The almost linear nature of plots of log(% sorption) versus log(time) was indicative of intraparticle diffusion. The values of intraparticle diffusion coefficients K_id were found to be 63.49 × 10^?2 and 94.35 × 10^?2 mg l^?1 min^0.5. The intraparticle diffusion was also confirmed by Bangham equation. Finally, various thermodynamic parameters were evaluated. The negative ΔG° indicated spontaneous nature of uptake process while positive ΔH° value suggested exothermic nature of the sorption process. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and emission analysis of RE (Eu or Dy):Li2TiO3 ceramics

The development and photoluminescence analysis of Eu³⁺or Dy³⁺ ions in the matrix of lithium titanate (Li₂TiO₃) ceramics by using a solid state reaction method are reported. Emission spectra of Eu³⁺:Li₂TiO₃ ceramics have shown strong red emission at 611 nm (⁵D₀ → ⁷F₂) with λ_exci = 392 nm (⁷F₀ → ⁵L₆) and from the Dy³⁺:Li₂TiO₃, a blue emission at 493 nm (⁴F_9/2 → ⁶H_15/2) and also an yellow emission at 582 nm (⁴F_9/2 → ⁶H_13/2) have been observed with λ_exci = 366 nm (⁶H_15/2 → ⁶P_5/2). Both the rare-earth ions containing ceramics have displayed their brighter emission performance from their measured spectral results. In addition, X-ray diffraction (XRD), Fourier transform infra red (FTIR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) have been used to characterize the structural properties of (Eu³⁺ or Dy³⁺):Li₂TiO₃ ceramics.     

Preparation,structural and thermo-mechanical properties of lithium aluminum silicate glass–ceramics

Lithium aluminum silicate glasses of composition (wt%) 12.6Li₂O–71.7SiO₂–5.1Al₂O₃–4.9K₂O–3.2B₂O₃–2.5P₂O₅ were prepared by the melt quench technique. These glasses were converted to glass–ceramics based on DTA data. X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FTIR) were used to discern the phases evolved in the glass–ceramics. Phase morphology was studied using scanning electron microscopy (SEM). Thermal expansion coefficient (TEC) and glass transition temperature (T_g) of all samples were measured using thermo-mechanical analyzer (TMA). It was found that 3 h dwell time at crystallization temperature yielded samples with good crystallinity with a TEC of 9.461 × 10⁻⁶ °C⁻¹. Glass–ceramic-to-metal compressive seal with SS-304 was fabricated using LAS glass–ceramic. The presence of metal housing and compressive stresses at the glass–ceramic-to-metal interface reduced average grain size and changed the overall microstructure.     

Synthesis and evaluation of micellar properties and antimicrobial activities of imidazole‐based surfactants

The synthesis of two types of imidazole‐based surfactants, [(ROCOCH₂MIm)Br] and [(RNHCOCH₂MIm)Br], of varying chain lengths (C₁₀, C₁₂ and C₁₆), was conducted in the present work. The synthesis involves an initial reaction of bromoacetic acid with fatty alcohols or fatty amines, followed by quaternization with N‐methyl imidazole. The micellar properties of all the synthesized compounds were determined using surface tensiometry and compared with [(RMIm)Br], a well‐studied alkyl‐substituted imidazole‐based surfactant. Within the same homologous series, a decrease in critical micelle concentration (cmc) was observed with increasing alkyl chain length in all three types of cationic surfactants. Introduction of an ester [(ROCOCH₂MIm)Br] or an amide group [(RNHCOCH₂MIm)Br] in the alkyl chain lowers the cmc when compared to a cationic surfactant without functional group, [(RMIm)Br]. The synthesized surfactants were also assayed for antimicrobial activities and found to possess good activities against selected strains.     

Comparison of the Effects of an Ionic Liquid and Other Salts on the Properties of Electrospun Fibers, 2 – Poly(vinyl alcohol)

Understanding the effect of conductivity in electrospinning solutions is crucial in order to improve or control the electrospinning process. In this paper the effect of adding small amounts (0.039–0.259 mol · kg^?1) of three different conductive additives to aqueous solutions of polyvinyl alcohol has been investigated. The salts were HMICl (a room temperature ionic liquid), TEBAC (a quaternary ammonium salt) and KCl. Addition of these salts caused a steady increase in the solution conductivity but the fiber diameter was typically greater than that of PVA alone, and exhibited an oscillatory trend. The oscillatory trend on the fiber diameter is attributed to fiber backbuilding and fusion that occurs prior to deposition on the collector.

     

Synthesis and properties of water soluble single‐walled carbon nanotube graft ionic polyacetylene nanocomposites

Water‐soluble single‐walled carbon nanotube‐polyacetylene [SWNT‐PA, SWNT‐P(2EPy‐MeTf)] nanocomposites have been synthesized by using the surface initiated “grafting‐from” method. The FT‐IR spectra confirmed the formation of an amide bond between the functionalized SWNTs and the initiator, 4‐(2‐Aminoethyl) pyridine, to polymerize N‐Methyl‐2‐ethynlypyridinium triflate (2EPy‐MeTf). UV‐vis spectroscopy indicated that the degree of polymerization of P(2EPy‐MeTf) in the SWNT‐polyacetylene composites is 15, based on the Lewis‐Calvin equation. The SWNT‐polyacetylene composites have been characterized by TGA, AFM, and TEM. From TGA analysis, the loading of SWNTs in the SWNT grafted ionic polyacetylenes is estimated to be 22%. AFM and TEM images clearly showed that the nanotube is wrapped with the PA. The SWNT‐polyacetylene composites displayed high water solubility (8 mg/ml). The room temperature electrical conductivity of the doped SWNT‐polyacetylene composites was found to be in the range of 10⁻³ to 10⁻⁴ S/cm, an order of magnitude of increase over neat P(2EPy‐MeTf) and a two order of magnitude increase over Dendrimer‐polyacetylen composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers