The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.     

A parallel spectral element method for dynamic three-dimensional nonlinear elasticity problems

We present a high-order method employing Jacobi polynomial-based shape functions, as an alternative to the typical Legendre polynomial-based shape functions in solid mechanics, for solving dynamic three-dimensional geometrically nonlinear elasticity problems. We demonstrate that the method has an exponential convergence rate spatially and a second-order accuracy temporally for the four classes of problems of linear/geometrically nonlinear elastostatics/elastodynamics. The method is parallelized through domain decomposition and message passing interface (MPI), and is scaled to over 2000 processors with high parallel performance.     

The effects of handedness and reachability on perceived distance.

Previous research has suggested that perceived distances are scaled by the action capabilities of the body. The present studies showed that when “reachability” is constrained due to a difficult grasp required to pick up an object, perceived distance to the object increases. Participants estimated the distances to tools with handle orientations that made them either easy or difficult to grasp with their dominant and nondominant hands. Right-handed participants perceived tools that were more difficult to grasp to be farther away than tools that were easier to grasp. However, perceived distance did not differ in left-handed participants. These studies suggest that, when reaching toward a target, the distance to that target is scaled in terms of how far one can effectively reach, given the type of reaching posture that is executed. Furthermore, this effect is modulated by handedness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development and study of robast control system for dc thyristor electric drive using polynomial techniques

Possibilities of polynomial techniques for synthesizing and analyzing a robast control system of dc thyristor electric drivers are considered. It is shown that the use of the suggested techniques makes it possible to decrease the sensitivity of a controlled electric drive to parametric, structural, and external disturbances by about an order of magnitude. A technique for optimizing the parametric sensitivity of the quality factors is suggested.     

A single-stage GM-type pulse tube cryocooler operating at 10.6 K

In order to explore the lowest attainable refrigeration temperature and improve cooling performance at temperatures around 20 K for a single-stage G-M type pulse tube cryocooler (PTC), numerical and experimental studies were performed. The National Institute of Standards and Technology (NIST) numerical model known as REGEN was applied to the simulation of a G-M type PTC for the first time. Based on the calculation results, a single-stage G-M type PTC was designed, fabricated and tested. The performance improvement of the regenerator in the temperature range of 10-80 K was investigated. The calculations predicted a lowest temperature of 10 K. A lowest temperature of 10.6 K was achieved experimentally with an input power of 7.5 kW, which is the lowest temperature ever achieved by a single-stage PTC. Further more, the cryocooler can provide a cooling power of 20 W at 20.6 K and 39.5 W at 30 K, respectively.     

Improved calculation of Si sputter yield via first principles derived interatomic potential

Silicon sputter yield under medium energy Ar+ ion bombardment is calculated via molecular dynamics, using a highly accurate interatomic potential for Ar-Si interactions derived from first-principles calculations. Unlike the widely used universal repulsive potentials such as the Moliere or ZBL parameterizations, this new potential, referred to as DFT-ArSi, is developed via localized basis density functional theory. Sputter yields for Si obtained with the DFT-ArSi potential at 500 eV and 1 keV incident energies are found to be within 6% and 2% of experimental results, respectively, while errors using existing potentials are typically on the order of 11%. The DFT-ArSi potential differs from existing empirical potentials in the ∼1 Å interatomic separation range which is shown to be the most important range for modeling low-to-medium energy ion bombardment.     

Restricted Complexity Network Realizations for Passive Mechanical Control

This paper considers a realization problem of restricted complexity arising in an approach to passive control of mechanical systems. This approach is based on synthesizing a positive-real admittance or impedance function using springs, dampers and inerters. This paper solves the following problem: what is the most general class of mechanical admittances which can be realized if the number of dampers and inerters is restricted to one in each case, while allowing an arbitrary number of springs and no transformers (levers)? The solution uses element extraction of the damper and inerter followed by the derivation of a necessary and sufficient condition for the one-element-kind (transformerless) realization of an associated three-port network. This involves the derivation of a necessary and sufficient condition for a third-order non-negative definite matrix to be reducible to a paramount matrix using a diagonal transformation. It is shown that the relevant class of mechanical admittances can be parametrized in terms of five circuit arrangements each containing four springs.     

A Study of the Radiolysis Products of the Tri-n-Butyl-Phosphate–Isopar-M–HNO3 System before and after Regeneration with Carbonates of Organic Bases

Protection of Metals and Physical Chemistry of Surfaces - By measuring the hydrodynamic characteristics (viscosity, density of extraction mixture, and interfacial tension) and determining the...     

The Inhibition Performance of trans-Cinnamaldehyde as a Green Compound for Mild Steel in Acidic 1 M HCl Medium: Correlation between Experimental and Theoretical Studies

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition propriety of (2E)-3-phenylprop-2-enal, known as trans-cinnamaldehyde (TCA) for mild steel in 1 M HCl medium was...