Enhanced visible green and 1.5 μm radiative emission of Er~(3+) ions in Li_2O-PbO-Al_2O_3-B_2O_3 glasses for photonic applications

A series of Er~(3+) ions doped lithium lead alumino borate(LiPbAlB) glasses were synthesized via melt quench method and their structural,physical and optical properties were studied.Judd-Ofelt theory in correlation with the emission and absorption profiles was performed for the measurement of various radiative parameters for different transitions of Er~(3+) doped glasses.The as-prepared glasses show deep green(550 nm) as well as NIR(1532 nm) emission at 380 and 980 nm excitation wavelengths,respectively.The intensity of emission spectra increases with Er~(3+) ions concentration up to 1.5 mol% and beyond quenching is observed.The Dexter theory applied to the emission profiles reveals the interaction between Er~(3+)ions as dipole-dipole in nature.CIE color coordinates are found to fall in the green region of the visible spectrum.It is observed that 1.5 mol% of Er~(3+) ions concentration is optimum to exhibit the maximum quantum efficiency,branching ratios,gain bandwidth,emission cross-section,gain crosssection and aptly suitable for visible and NIR photonic applications.     

Immobilization of cholesterol oxidase and potassium ferricyanide on dodecylbenzene sulfonate ion‐doped polypyrrole film

Dodecylbenzene sulfonate (DBS)‐doped polypyrrole (PPY) conducting polymer films were electrochemically deposited onto the indium‐tin‐oxide (ITO)‐coated glass plates in aqueous medium. The enzyme cholesterol oxidase (ChOx) was immobilized on these DBS–PPY films by a physical adsorption technique. These ChOx‐immobilized DBS–PPY films were characterized by ultraviolet–visible and Fourier transform infrared spectroscopy. The enzyme activity studies indicate that ～40% of ChOx leaches out from the ChOx/DBS–PPY film. The ChOx activity in the ChOx/DBS–PPY film was assayed as a function of cholesterol concentration. The results of amperometric measurements conducted on ChOx/DBS–PPY/ITO film show linearity over the range 2–8 mM of cholesterol solution. The ChOx/DBS–PPY/ITO electrodes exhibit a response time of 30 s and are stable for ～3 months at 4 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3486–3491, 2001     

Failure analysis of left barrel of an aircraft engine

This investigation analyses the failure of left barrel used in engine of an aircraft. The barrel was subjected to detailed examination using standard non-destructive and destructive testing methods in order to identify the cause of failure of left barrel. The experimental results include fractography, chemical analysis, coating analysis and optical microstructure. The investigation concludes that failure is caused by the formation of corrosion pits which act as stress raiser and fatigue has assisted in propagation of the crack.     

Investigations on the thermal effects in non-circular journal bearings

A comparative study based on the thermal performance of elliptical and offset-halves journal bearings has been carried out by solving energy equation while assuming Parabolic Temperature Profile Approximation across the fluid film for faster computation of temperatures. Investigation for the rise in oil film temperatures, thermal pressures, load capacity, and power loss for three commercially available grade oils have been carried out for bearing configurations under study. It has been found that the offset-halves journal bearing runs cooler when compared with elliptical journal bearing profile with minimum power loss and good load capacity using Oil 2 as lubricant for which minimum thermal degradation has been observed.     

Methanogenesis of black liquor in a two‐stage biphasic reactor system using an immobilized cell system

The methanogenesis of black liquor from pulp and paper mill was achieved using immobilized cell technology in a laboratory‐scale two‐stage reactor system run continuously for 340 days. The optimum organic loading rate for the anaerobic treatment of black liquor was 8.0 kgm^?3d^?1 at which the % COD removal, biogas production and methane content were 55%, 11 dm³d^?1 and 71%, respectively. Organic loading rates above 8.0 kgm^?3d^?1 were observed to be toxic to the methanogenic bacteria and resulted in decreased methane content, biogas and COD removal. The applicability of the system to the large‐scale processing and treatment of paper mill liquid waste is discussed. © 2001 Society of Chemical Industry     

Strontium Zirconate and Strontium Titanate Ceramics for High-Voltage Applications: Synthesis, Processing, and Dielectric Properties

The synthesis, processing, and electrical properties of SrZrO₃ and SrTiO₃ materials have been examined. Phase-pure powders of SrZrO₃ and SrTiO₃ materials were synthesized using the Pechini method. Powder processing routes that used water and 2-propanol as carrier fluids were developed to achieve high green densities, which resulted in sintered densities of >99% of the theoretical density. The relative permittivity and average breakdown strength for carefully processed SrZrO₃ were 60 and 40 V/μm; the corresponding values for SrTiO₃ were 400 and 35 V/μm. The higher breakdown strengths suggest that these materials can be used in high-voltage capacitor applications.     

Dielectric relaxation and conduction mechanism of complex perovskite Ca0.90Sr0.10Cu3Ti3.95Zn0.05O12 ceramic

In this work, Sr and Zn co-doped calcium copper titanate having nominal formula Ca_0.90Sr_0.10Cu₃Ti_3.95Zn_0.05O₁₂ has been synthesized and systematically studied for structure, dielectric and electrical properties. The phase purity of the prepared composition has been confirmed by X-ray diffraction (XRD) pattern and various structural parameters are presented here with Rietveld refinement data. The Scanning electron microscopy (SEM) image revealed the presence of homogeneous fine-grained microstructure investigated in the prepared ceramic. The impedance data well fitted with 2 R-CPE model confirmed the non-ideality of the system. Dielectric studies have shown the existence of two relaxation processes in low and high frequency domains. Low frequency dielectric response proposed as a combination of Maxwell-Wagner relaxation and intrinsic defect (V_o⁺⁺) while high frequency behavior has been interpreted in terms of polaronic relaxation caused by hopping process of an electron between Ti³⁺ and Ti⁴⁺ states. The frequency dependent behavior of conductivity has been well fitted to Dong’s model and interpreted in term of Overlapping Large Polaron Tunneling (OLPT) mechanism. The various parameters; relaxation angular frequency (ω₁) of Debye process, ionic hopping frequency (ω₂₎, dc conductivity (σ_o), cole- cole parameter (α) and frequency exponent (s) have been determined by Dong’s Model fitting.     

Biomimetic synthesis and patterning of silver nanoparticles

The creation of nanoscale materials for advanced structures has led to a growing interest in the area of biomineralization. Numerous microorganisms are capable of synthesizing inorganic-based structures. For example, diatoms use amorphous silica as a structural material, bacteria synthesize magnetite (Fe3O4) particles and form silver nanoparticles, and yeast cells synthesize cadmium sulphide nanoparticles. The process of biomineralization and assembly of nanostructured inorganic components into hierarchical structures has led to the development of a variety of approaches that mimic the recognition and nucleation capabilities found in biomolecules for inorganic material synthesis. In this report, we describe the in vitro biosynthesis of silver nanoparticles using silver-binding peptides identified from a combinatorial phage display peptide library.     

Silica-precipitating peptides isolated from a combinatorial phage display peptide library

Many biological organisms contain specialized structures composed of inorganic materials. Cellular processes in vivo facilitate the organized assembly of mineral building blocks into complex structures. The structural hierarchy and complexity across a range of length scales are providing new ideas and concepts for materials chemistry. Proteins that direct biomineralization can be used to control the production of nanostructured materials and facilitate the fabrication of new structures. Here, we demonstrate that some of the silica-binding peptides isolated from a combinatorial phage peptide display library can be used in precipitating silica from a solution of silicic acid. The results described in this report demonstrate that peptides displayed by phages act as templates in inorganic material synthesis and provide a means of understanding how some of the biological systems may be carrying out materials chemistry in vivo.