Effect of age and dietary fat (fish,corn and coconut oils) on tocopherol status of C57BL/6Nia mice

The effect of age and dietary fat type on tocopherol status was investigated using young and old C57BL/6Nia mice fed semipurified diets containing 5% (by weight) fish, corn or coconut oils and supplemented with 30, 100 or 500 ppm dl-α-tocopheryl acetate for 6 wk. Tocopherol levels in the diets, plasma, liver, kidney and lung were measured by high performance liquid chromatography following appropriate extractions. The results indicate that mice fed fish oil maintain lower plasma and tissue tocopherol concentrations than those fed corn and cononut oils (fish<corn oil<coconut oil). The difference was not due to a loss of tocopherol prior to consumption, but rather appeared to occur during the absorption process. Old mice had lower plasma and liver tocopherol concentrations than young mice. Old mice fed fish oil, however, maintained plasma tocopherol levels better than young mice fed fish oil, presumably due to their larger tocopherol pool. No age effect was detected on kidney and lung tocopherol levels. It is concluded that tocopherol status is affected by age and dietary fat type, especially fish oil.     

An improved mechanism for capacity payment based on system dynamics modeling for investment planning in competitive electricity environment

Many countries have experienced restructuring in their electric utilities. This restructuring has presented the power industries with new challenges, the most important of which is long-term investment planning under uncertain conditions. This paper presents an improved mechanism for capacity payment. The mechanism has been investigated based on system dynamic modeling. In our proposed mechanism, generators will recover a part of their investment through capacity payment. While the payment for any plant remains constant during the operation period, it depends on the investment needed to build it. The main factors affecting long-term planning have been considered in our model. The approach can be used to investigate the effects of fixed as well as variable capacity payment in market investment. We used the probability density function of load as a new concept to calculate average market price. Delays in unit constructions, estimation of demand, and market capacity growth during construction periods have been included in the proposed algorithm as parameters, which affect the regulator's decision for changing capacity payment. The model can be used by regulators to investigate strategies that may affect the fluctuations in the market.     

Analytical solution for transient temperature and thermal stresses within convective multilayer disks with time-dependent internal heat generation,Part II: Applications

This work investigates the analytical solution for transient temperature and thermal stresses within three circular geometries. First, the transient temperature and thermal stresses within a composite disk are addressed. Then, two examples regarding transient temperature and thermal stresses throughout circular heaters are analyzed. Pulsed and sinusoidal internal heat generations are incorporated into the second and third examples, respectively. For the composite hollow-disk example, merely the separation of variables method (SVM) is used to overcome the energy partial differential equation. For the other two examples, the combination of the SVM and Duhamel's theorem are adopted to solve the partial differential equations. Accordingly, assuming plane stress formulation, the transient thermal stresses within structures are obtained.     

Effect of molecular weight distribution on polymer diffusion during film formation of two-component high-/low-molecular weight latex particles

We describe fluorescence resonance energy transfer (FRET) studies of film formation by a new type of two-component latex particles. These particles consist of a miscible blend of two components that have a similar composition but very different molecular weights. In our approach, we used sequential seeded emulsion polymerization to generate (in situ) a fraction of oligomer in poly(butyl acrylate-co-methyl methacrylate) P(BA-MMA) seed particles that contained a relatively high molecular weight (high-M) dye-labeled polymer. In this way we could systematically change the molecular weight distribution of polymer inside the particles. We varied the amount and the molecular weight of the oligomers. For latex films cast from these two-component particles, we studied the diffusion rate of the high molecular weight polymer by FRET. These measurements revealed that oligomers promoted diffusion rate during latex film formation (oligoplasticization). We analyzed our diffusion data in terms of the Fujita–Doolittle free-volume model and showed that higher molecular weight oligomers are less efficient as plasticizers. In separate experiments, oligomers with similar molecular weights as those in the two-component particles were introduced via latex blending. We compared oligoplasticization in latex blends films with that in the two-component particles films. Finally, we investigated the rheological behavior of the two-component polymers with compositions adjusted to have a common T_g (2 °C). The higher the molecular weight of the oligomer, the more that had to be added to achieve T_g = 2 °C. All of the oligomers were much shorter than the entanglement length and act as diluents of the entanglements in the high-M polymer. We found that incorporating larger amounts of oligomers with a higher molecular weight resulted in a more pronounced drop in polymer viscosity, associated with the decrease in the entanglement density.     

不同螺栓布置下螺栓连接的滞回性能

从1994年北岭地震中可看到,栓焊节点的抗震性能较差。因此,常用于工业建筑和高层建筑中的抗弯框架多采用端板连接和T型螺栓连接。采用有限元方法,通过改变螺栓的纵横布置对比了14个试件的滞回性能。结果表明:假定两者总的耗能能力相同,则T型螺栓连接的抗弯能力和初始转动刚度均比基于AISC规范设计的端板螺栓连接高。在往复荷载作用下,螺栓布置的改变对T型螺栓连接破坏模式的影响要大于端板连接,端板连接更适用于具有初始几何缺陷的结构。     

Reliability Improved Stochastic Dynamic Programming for Reservoir Operation Optimization

Stochastic Dynamic Programming (SDP) is widely used in reservoir operation problems. Besides its advantages, a few drawbacks have leaded many studies to improve its structure. Handling the infeasible conditions and curse of dimensionality are two major challenges in this method. The main goal of this paper is proposing a new method to avoid infeasible conditions and enhance the solution efficiency with new discretization procedure. For this purpose, an optimization module is incorporated into regular SDP structure, so that, near optimal values of state variables are determined based on the available constraints. The new method (RISDP) employs reliability concept to maximize the reservoir releases to satisfy the downstream demands. Applying the proposed technique improves the reservoir operating policies compared to regular SDP policies with the same assumptions of discretization. Simulation of reservoir operation in a real case study indicates about 15% improvement in objective function value and elimination of infeasible conditions by using RISDP operating policies.     

Spontaneous Formation of Liquid Crystals in Ultralarge Graphene Oxide Dispersions

A novel process is developed to synthesize graphene oxide sheets with an ultralarge size based on a solution‐phase method involving pre‐exfoliation of graphite flakes. Spontaneous formation of lyotropic nematic liquid crystals is identified upon the addition of the ultralarge graphene oxide sheets in water above a critical concentration of about 0.1 wt%. It is the lowest filler content ever reported for the formation of liquid crystals from any colloid, arising mainly from the ultrahigh aspect ratio of the graphene oxide sheets of over 30 000. It is proposed that the self‐assembled brick‐like graphene oxide nanostructure can be applied in many areas, such as energy‐storage devices and nanocomposites with a high degree of orientation.     

Prediction of wear properties in A356 matrix composite reinforced with B4C particulates

In the present study, wear properties of A356 unreinforced alloy and composites with different vol.% of boron carbide particles were investigated. It is noted that composites exhibit better wear resistance compared to unreinforced alloy. According to the differences in wear rates of the composites, two separate wear rate were identified as low and high wear rate regimes. A combination of artificial neural network (ANN) and finite element technique (FEM) was implemented in order to predict the composites wear behavior. The FEM method is used for discretization and to calculate the transient temperature field of quenching. It is observed that predictions of ANN are consistent with experimental measurements for A356 composite and considerable savings in terms of cost and time could be obtained by using neural network model.     

Improving the quality of surface in the polishing process with the magnetic abrasive powder polishing using a high-frequency induction heating source on CNC table

In this research, polishing flat surfaces has been done by using a completely new and innovative method. In this method, rotary magnetic tool that carry magnetic abrasive powders, is placed in a very strong thermal induction field, and magnetic rotary tool frequently change its direction from clockwise (CW) to counterclockwise (CCW) and CCW to CW. The frequency of changing rotation direction is an important parameter of this innovation method. The intended pieces for polishing operations have been placed on a synchronic two-axis Cartesian CNC table, and the gap between rotary magnetic tool and the sheet surface can be controlled by a power transmission screw operating in the direction of the vertical axis. Several experiments have proved high performance of the new proposed method in the process of polishing.