In-Operation Monitoring of the Soot Load of Diesel Particulate Filters: Initial Tests

Diesel particulate filters (DPF) are indispensable parts of modern automotive exhaust gas aftertreatment systems due to the stringent emissions legislation. For a fuel-efficient control strategy, it would be beneficial to determine directly and in-operation their actual trapped soot mass. Two novel approaches—based on the electrical conductivity of trapped soot particles—emerged recently. By measuring the electrical resistance between different single walls inside the filter, the soot load is determined with local resolution. The microwave-based technique is a contactless approach that gives an integral value depending on the soot mass in the DPF. We present investigations on loading and regeneration of DPFs in a dynamometer test bench applying both methods. The results are compared with each other and correlated with the differential pressure and the soot mass. Especially the microwave-based technique has a potential for serial application.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

LAS glass–ceramic scaffolds by three-dimensional printing

Highly porous (>60% open porosity) glass–ceramic scaffolds with remarkable mechanical properties (compression strength of ～15 MPa) were produced by indirect 3D printing. Precursor glass powders were printed into 3D ordered structures and then heat treated to sinter and develop crystalline phases. The final glass–ceramic contained a β-spodumene solid solution together with a secondary phase of lithium disilicate.The precision of the printed geometry and the density of the struts in the scaffold depended on several processing parameters (e.g. powder size and flowability, layer thickness) and were improved by increasing the binder saturation and drying time. Two types of powders with different particle size distribution (PSD) and flowability were used. Powders with a larger PSD, could be processed within a wider range of printing parameters due to their good flowability; however, the printing precision and the struts density were lower compared to the scaffolds printed using the powder in a smaller average PSD.     

ER Stress in ERp57 Knockout Knee Joint Chondrocytes Induces Osteoarthritic Cartilage Degradation and Osteophyte Formation

Ageing or obesity are risk factors for protein aggregation in the endoplasmic reticulum (ER) of chondrocytes. This condition is called ER stress and leads to induction of the unfolded protein response (UPR), which, depending on the stress level, restores normal cell function or initiates apoptotic cell death. Here the role of ER stress in knee osteoarthritis (OA) was evaluated. It was first tested in vitro and in vivo whether a knockout (KO) of the protein disulfide isomerase ERp57 in chondrocytes induces sufficient ER stress for such analyses. ER stress in ERp57 KO chondrocytes was confirmed by immunofluorescence, immunohistochemistry, and transmission electron microscopy. Knee joints of wildtype (WT) and cartilage-specific ERp57 KO mice (ERp57 cKO) were analyzed by indentation-type atomic force microscopy (IT-AFM), toluidine blue, and immunofluorescence/-histochemical staining. Apoptotic cell death was investigated by a TUNEL assay. Additionally, OA was induced via forced exercise on a treadmill. ER stress in chondrocytes resulted in a reduced compressive stiffness of knee cartilage. With ER stress, 18-month-old mice developed osteoarthritic cartilage degeneration with osteophyte formation in knee joints. These degenerative changes were preceded by apoptotic death in articular chondrocytes. Young mice were not susceptible to OA, even when subjected to forced exercise. This study demonstrates that ER stress induces the development of age-related knee osteoarthritis owing to a decreased protective function of the UPR in chondrocytes with increasing age, while apoptosis increases. Therefore, inhibition of ER stress appears to be an attractive therapeutic target for OA.     

Controlling micro‐ and nanofibrillar morphology of polymer blends in low‐speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/PVA blend through a capillary die

The effects of the extrusion rate on the morphological changes of poly(lactic acid) (PLA)/poly(vinyl alcohol) (PVA) blend through a capillary die were investigated. In this study, the extrusion rate or mass flow rate is altered from 0.5 g min^?1 to 2 g min^?1 with an increment of 0.5 g min^?1. The PLA/PVA blend with a composition of 30/70 (wt %) exhibits a particle matrix morphology with dispersed PLA droplets within the PVA matrix. It is found that, the spherical or ellipsoidal dispersed PLA droplets are elongated and coalesced into rod‐like or longer ellipsoidal droplets when they pass through the capillary die. When the extrusion rate increases, the coalescence between the large PLA droplets occurs more intense. However, the changes of the extrusion rate have no strong effect on the coalescence of small droplets having diameter less than about 150 nm. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44257.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

Tryptophan fluorescence of calmodulin binding domain peptides interacting with calmodulin containing unnatural methionine analogues

The interactions between the abundant methionine residues ofthe calcium regulatory protein calmodulin (CaM) and severalof its binding targets were probed using fluorescence spectroscopy.Tryptophan steady-state fluorescence from peptides encompassingthe CaM-binding domains of the target proteins myosin lightchain kinase (MLCK), cyclic nucleotide phosphodiesterase (PDE)and caldesmon site A and B (CaD A, CaD B), and the model peptidemelittin showed Ca²⁺-dependent blue-shifts in their maximumemission wavelength when complexed with wild-type CaM. Blue-shiftswere also observed for complexes in which the CaM methionineresidues were replaced by selenomethionine, norleucine and ethionine,and when a quadruple methionine to leucine C-terminal mutantof CaM was studied. Quenching of the tryptophan fluorescenceintensity was observed with selenomethionine, but not with norleucineor ethionine substituted protein. Fluorescence quenching studieswith added potassium iodide (KI) demonstrate that the non-nativeproteins limit the solvent accessibility of the Trp in the MLCKpeptide to levels close to that of the wild-type CaM–MLCKinteraction. Our results show that the methionine residues fromCaM are highly sensitive to the target peptide in question,confirming the importance of their role in binding interactions.In addition, we provide evidence that the nature of bindingin the CaM–CaD B complex is unique compared with the othercomplexes studied, as the Trp residue of this peptide remainspartially solvent exposed upon binding to CaM.     

Distortion-free laser beam shaping for material processing using a digital micromirror device

Digital micromirror devices (DMD) are increasingly used in laser-based manufacturing for a maskless beam shaping in order to realize simultaneous 2D/3D material processing. Thereby, the DMD has to be irradiated under a sharp angle to achieve acceptable projection quality with negligible distortion phenomena. In this article, we present a novel setup for DMD-based laser material processing. It enables the irradiation under large angles (up to 60\(^{\circ }\)), the reduction of optical elements as well as machine size. Occurring optical distortions during the amplitude-based laser beam shaping are characterized. To eliminate these phenomena, we implement an optical modelling of the DMD patterns, taking into account the propagation through the tilted interfaces. The resulting imaging of different desired shapes is verified experimentally for its geometrical properties such as length, radius and aspect ratio. Thereby, an angle-dependent correction and high shape accuracy of the image projection is shown. This novel arrangement may have applications in direct laser writing and photochemical machining.     

Separation of Extracellular Esterases from Pellet Cultures of the Basidiomycete Pleurotus sapidus by Foam Fractionation

Two extracellular esterases were produced in submerged cultures of the basidiomycete Pleurotus sapidus. A foam fractionation device was designed and employed for the isolation of the esterolytic enzymes. The recovery of enzyme activity in the liquefied foam strongly depended on the superficial gas velocity. High purification and enrichment factors (E _a = 62.0, P = 15.5) were achieved using nitrogen at 1.87 cm min⁻¹ within 100 min. Increasing the superficial gas velocity to 2.49 cm min⁻¹ improved the recovery of total esterase activity in the foam to >95% at the expense of reduced enrichment and purification factors. Differences in their physicochemical characteristics resulted in differing foaming properties of the two esterases secreted by P. sapidus. By variation of the pH value of the culture medium and addition of Triton X-100, both esterases were successively and quantitatively transferred into the foam in a two-step fractionation process.