Capacitor voltage balancing in multilevel flying capacitor inverters by rule-based switching pattern selection

A rule-based scheme is investigated for capacitor voltage balancing in a multilevel flying capacitor inverter (MFCI). Without using voltage feedback, the scheme determines the best switching pattern for maintaining nil mean current in all capacitors, hence minimising the capacitor voltage fluctuation. The method is developed to work with the selective harmonic elimination (SHE) technique for sinusoidal voltage generation applied to control static VAR compensators. The method has been designed using a four-cell five-level MFCI as an example. The selected pattern has been shown to give superior performance in load-voltage total-harmonies distortion level and mean capacitor voltage fluctuation. The method is validated experimentally for this form of MFCI     

Positive psychology principles applied to consulting psychology at the individual and group level.

This article describes the application, at the team and individual level, of findings from the positive psychology research. An overview of this research is presented focusing on several areas generally included in the positive psychology domain: flow, appreciative inquiry, the broaden and build theory, and other strategies for increasing the experience of positive emotions and the identification and deployment of strengths. The authors propose that these applications show promise in consulting psychology engagements and may have merit when utilized by practitioners themselves. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Biaxiale Ermüdung reibrührgeschweißter Strukturelemente

Biaxial fatigue of friction stir welded stiffened panels Within the framework of the European WelAir project, cruciform specimens made from stiffening FSW overlap joints were fatigued in the DLR biaxial test rig. To resemble the loading situation of pressurized fuselage structures, proportional loading without any phase shift, but with different load ratios λ between the loading components in both directions was applied.Natural crack initiation and subsequent crack growth were governed by the stiffness gradient caused by introducing the stringer. Cracks initiated and propagated at run‐in and run‐out locations in a direction perpendicular to the weld seam. The shortest fatigue life was observed for uniaxial loading in welding direction (λ = 0). An additional stress component perpendicular to the joint line (λ > 0) resulted in a higher number of cycles to failure. Similar to single stringer panels, increasing the load ratio also increased the number of cycles to failure for FSW clip‐stringer structural members, but additionally gives a different location of the fatal crack.     

Nanoindentation mapping of mechanical properties of cement paste and natural rocks

This paper reports a study to assess nanoindentation mapping of mechanical properties of cement paste and natural rocks. Initial work seems to show that mechanical property mapping by nanoindentation is feasible and can be related to microscopic information. Further work is however required on the effect of indent size and spacing. Such a testing technique can be very useful for materials with different phases to study the intrinsic properties of each component, and also the interaction and properties of the interfacial regions of different phases. The values of Young's modulus and hardness of the individual mineral phases were also determined by statistically analysing a large number of experimental data.     

Local Structure and Valence State of Mn in Ga1−x Mn x N Epilayers

Mn has been incorporated in epilayers of the large-gap semiconductor GaN grown by molecular beam epitaxy using a nitrogen plasma cell. Detailed extended X-ray absorption fine structure (EXAFS) studies of a Ga_0.98Mn_0.02N epilayer confirm that the Mn atoms substitute the Ga atoms, with an increase by 2.7% of the distance to the nearest nitrogen atoms. Near-edge spectroscopy results tend to indicate that the valence state of Mn is slightly higher than 3+, while EXAFS analysis suggests an electron transfer to the N neighbors.     

ESR Refining Potential for Titanium Alloys using a CaF2‐based Active Slag

Since the end of the Cold War and due to the needs to produce titanium more cost‐efficient and thus more attractive for its civilian use, the electroslag remelting (ESR) process has become an increasingly important topic of international research programmes, because titanium and titanium aluminides can be chemically refined by ESR in some degree. Using ESR, titanium turnings from machining steps and scrap from foundries can be remelted, refined and provided as secondary titanium for the market at relatively favourable prices. This article investigates the removability of the main impurities out of titanium and titanium‐aluminium alloys by electroslag remelting using the active slag system CaF₂‐Ca‐(CaO). Thermochemical and kinetic aspects of the ESR process are considered.     

Mechanical improvement of hydroxyapatite by TiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanoparticles deposition

Deposition of Ti was carried out by laser ablation onto hydroxyapatite porous discs in an Ar atmosphere. Ti nanoparticles were deposited onto HAp surface in order to modify its roughness and morphology as it is observed by scanning electron microscopy (SEM) and scanning probe microscopy (SPM). A homogeneous distribution of Ti over the disc surface was corroborated by elemental mapping. A comparison of the hydroxyapatite hardness before and after deposition was performed using SPM nanoindentation. Transmission Electron Microscopy (TEM) showed that the Ti nanoparticles obtained were covered by an oxygen shell. It is shown that surface modifications of the covered HAp by Ti result in better mechanical properties, reducing the possible damage to the HAp ceramic by friction or impacts as it often happens in meniscus, bone junctions and the inclusion of prosthesis for human treatments.